Printable View
It isn't in fact. Go buy ram with Winbond UTT or new BH5 (new GeIL Ultra-X PC3200 (before assure they are BH5 on BP PCB and not TCCD on BP PCB) for example or OCZ VX (Value or Gold it is almost the same, they are ALL UTT on BP PCB)).Quote:
Originally Posted by cAsio
Bye.
thx for info but i first need 2x256mb kit because i buyed completely watercooler für €400 and amd winnie+mobo kost some € :DD
i not found 2x256mb geil ultra-x or ocz vx in any shop in germany :(
GOLD VX is only in duelkit 2x512mb not 2x256! :(
anyone here know who mutch mhz are in with adata vitesta pc500 , can i bring it highter than 250mhz when yes whow mutch are in mostly ?
and witch chips i read the new model got tccd the old hynix
but how high i can get with that ramm ?
yes you can but with 3-4-4-8 and 3.2v its based ob d43 hynix chip :(
hi, i've got new twinmos speed premium. they work fine for me.... 249mhz 2-2-2-5 @ 3.3v but. If i raise the voltage up to 3.4 errors are displayed in memtest. Are they too hot? how to cool them down? Headspreader+fan? thx
rondrian you got new 1A4T ??
Don't use a "heat trapper"... just a fan ;)
is this ram TCCD????
I'm a bit confused by the table on the first post...when the ram is listed, and the timings in ()'s...is that the timing that is advertised and spec'd by the manufacturer...or are those the timings it can run at?
thx
Thats PC-3200 at cas 2.5 so NO thats not TCCD.
The ram on the front page clearly states:
PQI Turbo PC-3200 at (2-2-2-5) and PQI Turbo PC-4000 at (2.5-3-3-7).
Nice try though :D
Perkam
so what your saying is that the timings that are in ()'s are what the mfr is advertising for that module. If that's the case...then that just cleared up a LOT :DQuote:
Originally Posted by perkam
well..... the errors are still appearing.... 1 80mm fan blowing on the sticks.... help!
I've read over on the DFI forums that people are having luck "burning in" thier sticks. Basically, they set it to whatever voltage (mostly 3.1 or 3.2v) and then they let Test #7 crank on them for hours at a time. After a period of time doing that, it seems that a lot of them can get them stable w/o errors.Quote:
Originally Posted by Rondrian
I may try something similar when I can order some new ram.
hum.... on vdimm up tp 3.3 they work fine...
_
List updated! Look @ "New"!
http://www.mushkin.com/epages/Mushki...ct/View/990992
A little confused. This module is UTT on BrainPower PCB?
Yeah. Look @ here: http://www.xtremesystems.org/forums/...ad.php?t=56685Quote:
Originally Posted by koei
nicenessQuote:
Originally Posted by Punisher!
Thanks for the reply. Just bought some. Too bad all the cheap sources are in US and won't ship to Canada. What do they have against Canadians anyways! Ended up being about $200CAD, but still cheap for UTT and BP.
Np! Let us know! :DQuote:
Originally Posted by koei
:D :toast:Quote:
Originally Posted by Disposibleteen
I'm sorry I chose the easy way! I was wondering what these modules use: http://www.ocztechnology.com/product...0+Dual+Channel . I am confused because in the first page I couldn't find any OCZ with 2-3-2-6 default timings. My estimate is UTT, however I'm not sure...
AND, if you know a proved/high performance BIOS setting for this RAM with DFI NF4 ultra-d can you please post it for me?
PS: I especially like this :cord:
Yeah, you are right. They are not on the list and actually I do not know which chip they have.Quote:
Originally Posted by ooztuncer
*** IMPORTANT UPDATE ***
New OCZ PC4800 with Samsung TCCD on Brainpower PCB!!!
EL PC4800 Platinum Edition (1GB Kit: OCZ6001024ELDCPE-K) --chip--> Samsung TCCD (new production) ~ Brainpower PCB http://m4tribes.m4d.it/puni/new.gif
Any ideia on what's Patriot LLK ? Probably getting 2x512 for 100€ (I think it's pretty cheap for Portugal) How good will they do ? They're going on a A8V with a 3000+ (Don't even have the CPU yet so i can't tell you what fsb i'm aiming...)
Never took notice of this thread before, great stuff!