ASUS P5E64 WS Evolution - Tips, Tricks, Mods, BIOS, OCing & More...

Printable View

Show 100 post(s) from this thread on one page

06-13-2008, 03:39 AM
Sav

I test max FSB on my QX (with Cellshok:D) but it's a crap :hehe:

Only 490 mhz (liquid cooling)

http://img379.imageshack.us/img379/7052/immaginesk8.jpg

Max Everest Bandwidth (PL=6)

http://img206.imageshack.us/img206/7...memffffcs6.png

10 GB/s @Sandra :D

http://img507.imageshack.us/img507/8624/ttyqq9.jpg

@Holmer
Next time for Corsair 4GB :D
06-13-2008, 01:06 PM
camouflage

:D O.K. - here we go......., I can highly recommend to flash back to the 0115 BIOS.

Tested 0401 & 0501 but many dividers are broken - could only run 1:1 & 1:2.

Didn't test 0201.

But here ist 0115:p:........ - how about 8 x 563 :eek::

http://img444.imageshack.us/img444/7082/8x563pi7.th.jpg

You might not believe me - but my new E8400 is doing this with only 1.1 VTT & 1.52 PLL.................:eek::eek:

Great G.Skill 1600 GBHZ also - need 1.88 VDIMM for 1T 900 MHz CAS 7 :clap:!!!

To avoid all the questions - here's my cooling setup:

http://www.xtremesystems.org/forums/...d.php?t=178594

Pics taken with my previous MAXIMUS EXTREME.

:welcome:
06-13-2008, 02:50 PM
runmc

camouflage

can you show voltages to get that fsb please - vert nice :clap:
06-13-2008, 02:54 PM
jabski

I will be testing 0115 bios Sunday. Thanks for the results camouflage
06-13-2008, 03:10 PM
camouflage

Quote:

Originally Posted by runmc

camouflage

can you show voltages to get that fsb please - vert nice :clap:

:D Use BIOS 0115.

PLL 1.52

VTT 1.10 (depends on Your CPU - my E8500 needs a lot more!)

NB 1.55

SB 1.20

COC 0.80

NBGTL 1.67

CPUGTL 1.63

Clock Twister lighter

AI Booster LVL 9

Strap AUTO

LLC Performance

:welcome:
06-13-2008, 03:30 PM
OverClocker_gr

Quote:

Originally Posted by camouflage

:D O.K. - here we go......., I can highly recommend to flash back to the 0115 BIOS.

Tested 0401 & 0501 but many dividers are broken - could only run 1:1 & 1:2.

Didn't test 0201.

But here ist 0115:p:........ - how about 8 x 563 :eek::

http://img444.imageshack.us/img444/7082/8x563pi7.th.jpg

You might not believe me - but my new E8400 is doing this with only 1.1 VTT & 1.52 PLL.................:eek::eek:

Great G.Skill 1600 GBHZ also - need 1.88 VDIMM for 1T 900 MHz CAS 7 :clap:!!!

To avoid all the questions - here's my cooling setup:

http://www.xtremesystems.org/forums/...d.php?t=178594

Pics taken with my previous MAXIMUS EXTREME.

:welcome:

nice results :D

my Evolution overvolts about 0.06-0.08v

So if the 1.88 is from bios,the real would be about 1.94-1.96 :)
06-14-2008, 01:44 AM
camouflage

Quote:

Originally Posted by OverClocker_gr

nice results :D

my Evolution overvolts about 0.06-0.08v

So if the 1.88 is from bios,the real would be about 1.94-1.96 :)

:D Thanks - my Vdimm hits the point. Tested with my blue Cellshock - ran on MAXIMUS EXTREME 1000 MHZ CAS 8 @ 1.92 Vdimm real (MAXIMUS EXTREME has a sensor!) - and now I need to set also 1.92 in Evolution BIOS for them to get the same speed. So mine does not overvolt I think.;)

:welcome:
06-14-2008, 01:50 AM
OverClocker_gr

Quote:

Originally Posted by camouflage

:D Thanks - my Vdimm hits the point. Tested with my blue Cellshock - ran on MAXIMUS EXTREME 1000 MHZ CAS 8 @ 1.92 Vdimm real (MAXIMUS EXTREME has a sensor!) - and now I need to set also 1.92 in Evolution BIOS for them to get the same speed. So mine does not overvolt I think.;)

:welcome:

different m/b different volt/mhz ;)

The best way to know the real volts of every part is to find the measure point with a DMM to see the real voltage.
Dont trust 100% the monitoring of every m/b ;)
06-14-2008, 02:57 AM
camouflage

:D Now one step further......:p: - still 8x563 but with 3:5 divider.

Lowered Vcore down to 1.384:clap:.

This board loves G.Skill GBHZ - 938 MHz CAS 7 @ 1.9 Vdimm, tRFC still 60 and
PL 8:

http://img294.imageshack.us/img294/6280/8x563fm1.th.jpg

Nice Everest score read/write/copy..........;)

:up::up::up:
06-14-2008, 04:20 AM
ToyTen

You kick ass Camou', GG

For me it's a bit disapointing: I can't do nothing serious with my OCZ 8500 Gold series... On a X38T-DQ6 I could have some nice ram frequencies, but on thius mobo... IT REALLY SUXX, I'm forced to get stronger rams :(

wuld theze fit the config http://www.memoryc.com/computermemor...iesrammod.html ?? (had soo many issues with OCZ rams that I'm a bit in the need for recomfort concerning that mobo :rofl:
06-14-2008, 06:35 AM
jpcastro

Quote:

Originally Posted by camouflage

:D Now one step further......:p: - still 8x563 but with 3:5 divider.

Lowered Vcore down to 1.384:clap:.

This board loves G.Skill GBHZ - 938 MHz CAS 7 @ 1.9 Vdimm, tRFC still 60 and
PL 8:

http://img294.imageshack.us/img294/6280/8x563fm1.th.jpg

Nice Everest score read/write/copy..........;)

:up::up::up:

uauuu your my hero :shocked: :p:

to bad i cant get 1T dont now why, already made and tried million different tests and no way :shrug:

with 2T is much more easy and fully stable, maybe i´ll try donwgrading to!

:up:
06-14-2008, 07:39 AM
ZoLKoRn

Quote:

Originally Posted by camouflage

:D O.K. - here we go......., I can highly recommend to flash back to the 0115 BIOS.

:welcome:

How your flash back to old version ? Thanks

btw. Nice memory performance :up:
06-14-2008, 07:39 AM
camouflage

:D That was good - but not good enough.........;)

Now it's gettin' serious - 8 x 575 3:5 divider PL 8 & tRFC 60 1T:eek::

http://img366.imageshack.us/img366/5562/8x575ub7.th.jpg

Vdimm 1.92

PLL 1.52

VTT 1.10

NB 1.57

Now I'm very close to the 10sec. SP 1M barrier:p: - first time I broke 13K read in Everest.......:shocked:

:welcome:
06-14-2008, 07:47 AM
ZoLKoRn

camouflage very nice bw, so can you try change the ?

Write to Precharge = 18-19
TRRD = 3 or 4
TRTP = 2-4
All Precharge to Refresh = 2-4

if can maybe it'll better :)
06-14-2008, 10:20 AM
camouflage

Quote:

Originally Posted by ZoLKoRn

camouflage very nice bw, so can you try change the ?

Write to Precharge = 18-19
TRRD = 3 or 4
TRTP = 2-4
All Precharge to Refresh = 2-4

if can maybe it'll better :)

:D Yadayadayadayada - wait for me...........:p:. This will be the next step,

didn't try to optimize RAM timings so far. I also will try 7-6-5-X;).

BTW - You can flash back to 0115 witz EZflash in BIOS. Load the 0115 to an USB stick and after reboot Your BIOS will recognize the file in the EZflash menue.

:welcome:
06-14-2008, 11:34 AM
StimulatedBoy

Bios 0115

Flashed to BIOS 0115 earlier today to see if it was better for my setup but it turned out that it gave me a couple of BSOD's on my standard settings (4.6MHz), so I am back on 0501. Probably my RAM as these are brand new... :shrug:
06-14-2008, 12:59 PM
ToyTen

is that 0501 so good ?

I did this (on 0115 bios) today, I'd be glad if some of you guys could compare the scores to yours at similar settings. To me it doesn't sound bad but still some comparison would be a good thing.
Vista32 http://pix.nofrag.com/3/2/3/4b35c0a9...ef13c318tt.jpg
XP32 http://pix.nofrag.com/7/0/c/8c58964b...aff5b4dctt.jpg
same bios settings, only timings change from Vista to XP, that's all I could do atm, sorry
06-14-2008, 01:06 PM
camouflage

Quote:

Originally Posted by ToyTen

is that 0501 so good ?

:( You can only run 1:1 & 1:2 divider with 0501 - all others are broken....

:welcome:
06-14-2008, 01:14 PM
ToyTen

Quote:

Originally Posted by camouflage

:( You can only run 1:1 & 1:2 divider with 0501 - all others are broken....

:welcome:

ok, thx for the precious info :)
I might ask you to compare to my screenies, but as you got some way better DDR3 than I... I'll just pass my way :yepp:
06-14-2008, 01:41 PM
OverClocker_gr

Quote:

Originally Posted by Rob Halford

Flashed to BIOS 0115 earlier today to see if it was better for my setup but it turned out that it gave me a couple of BSOD's on my standard settings (4.6MHz), so I am back on 0501. Probably my RAM as these are brand new... :shrug:

If you have the Load Line calibration @ Performance,this is the reason for the random bsods
06-14-2008, 01:41 PM
Holmer

Quote:

Originally Posted by Rob Halford

Flashed to BIOS 0115 earlier today to see if it was better for my setup but it turned out that it gave me a couple of BSOD's on my standard settings (4.6MHz), so I am back on 0501. Probably my RAM as these are brand new... :shrug:

Probably because the 0401 + 0501 BIOS include optimizations for high speed memory (that was written about the 0401 at least on Asus download). I see you are using OCZ 2x2GB 16000 memory how fast can you get them running stable on the Evolution? Last time I saw your settings you were running 418x11. Is that the case still? I had a hard time getting my 2x2GB Corsair DDR1800 memory to run stable at the rated speed. I'm afraid that my CPU is holding me back to go further than around 450x9, but my memory is not going much further than DDR1800.
Could you please post some settings if you are running your memory at DDR1800+ speed?
06-14-2008, 01:47 PM
jabski

Quote:

Originally Posted by OverClocker_gr

If you have the Load Line calibration @ Performance,this is the reason for the random bsods

whats best to have it on with bios 0115 ?? Auto ??
06-14-2008, 01:49 PM
ZoLKoRn

Quote:

Originally Posted by camouflage

:D Yadayadayadayada - wait for me...........:p:. This will be the next step,

didn't try to optimize RAM timings so far. I also will try 7-6-5-X;).

BTW - You can flash back to 0115 witz EZflash in BIOS. Load the 0115 to an USB stick and after reboot Your BIOS will recognize the file in the EZflash menue.

:welcome:

OK thanks for info :up:

btw. waiting to see your next step :D
06-14-2008, 01:49 PM
OverClocker_gr

Quote:

Originally Posted by jabski

whats best to have it on with bios 0115 ?? Auto ??

To normal.
but you have to bump a bit the vcore to have the same voltage with the LLC @ performance.
06-14-2008, 01:57 PM
jabski

ok thanks will give it a go :)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:00 AM.

XtremeSystems