Crucial Ballistix 8000C5 EPP oc...

Printable View

Show 100 post(s) from this thread on one page

01-20-2007, 05:57 PM
Roger_D25

Greet news T07N, glad to hear your happy! Heck 600Mhz isn't all that bad, lol! Although it may run Orthos for a few hours with no problems I've occationally had errors after multiple hours of Orthos. It might be a good idea to run Orthos overnight to make sure things are stable (try to run more than 8hrs if possible). Alot of people have different ideas of what "stable" really is, some think being able to run SuperPI's 1M test means their system is stable and others like myself like to run many hours of Orthos/Dual Prime before rig is stable?
01-20-2007, 06:32 PM
runmc

1 Attachment(s)

Not braggin and I'm sure not complaining. Well maybe I'm complaining because I didn't buy to sets.:)
01-20-2007, 06:51 PM
Roger_D25

What are you running for a board runmc? I ask because I've been looking for a version of "clockgen" to work with 680i but I've had no luck? With that said, 1260Mhz isn't too bad! What are you running for voltage to these modules?
01-20-2007, 06:56 PM
runmc

Quote:

Originally Posted by Roger_D25

What are you running for a board runmc? I ask because I've been looking for a version of "clockgen" to work with 680i but I've had no luck? With that said, 1260Mhz isn't too bad! What are you running for voltage to these modules?

I picked up a P5B DEL today - 2.4v on the DDR2 These sticks ran terrible on my P5W DH DEL - two completely different animals.
01-20-2007, 07:10 PM
Roger_D25

Thanks runmc, much apprecaited! I've been seriously considering making the switch over to the P5B-Deluxe (Plus) if/when it becomes available in our country? At the very least I'd like to try the P5B-Deluxe out for a bit to see how it runs compared to the 680i? Besides running your modules well what's your initial impression?
01-20-2007, 07:56 PM
runmc

Quote:

Originally Posted by Roger_D25

Thanks runmc, much apprecaited! I've been seriously considering making the switch over to the P5B-Deluxe (Plus) if/when it becomes available in our country? At the very least I'd like to try the P5B-Deluxe out for a bit to see how it runs compared to the 680i? Besides running your modules well what's your initial impression?

I like the board alot so far. I wish I had gotten it sooner. Your avatar says New Hampshire. I don't get it :confused:

edit - I just saw the (PLUS)
01-20-2007, 10:24 PM
T07N

Yeah the p5b dlx is good if you know how to configure it =).
01-22-2007, 12:17 PM
Gautam

Quote:

Originally Posted by runmc

I picked up a P5B DEL today - 2.4v on the DDR2 These sticks ran terrible on my P5W DH DEL - two completely different animals.

Good to see the rams' clocking well either way. :)
01-30-2007, 10:08 PM
syne_24

So i have this pair here for a few weeks with my P5W and I knew it was the board holding me back. Anyways got a chance to play with the abit 680i and Commando. It didnt do so well on the 680i due to abit's buggy bios. However, the Commando really was a different story. :)

600 @ 4-4-4-12 w/ 2.4v

http://i55.photobucket.com/albums/g1...600_cas4-1.jpg

500 @ 3-4-3-4 w/ 2.35v

http://i55.photobucket.com/albums/g1...4/500_cas3.jpg

Overall I'm really satisfied with this ram. Newegg slipped up big time :toast:
01-31-2007, 01:25 AM
Quentin

500 Cas 3 à 2.3v :confused:

do you have set cas 3 under windows ?
02-25-2007, 10:01 PM
Flexkill

I have this Crucial Ballistix PC8000 in my new rig here . This is on a P5W DH Deluxe(1901 BIOS) What dou you guys think of this OC?

Crucial/P5W DH Screenie
02-25-2007, 10:54 PM
gr8golf

Quote:

Originally Posted by runmc

Not braggin and I'm sure not complaining. Well maybe I'm complaining because I didn't buy to sets.:)

I am going to list my set of Ballistix for sale in the next couple of days. I wanted to go to 4GB and I got in on the Buffalo Firestix deal so my Ballistix will be on the market.
02-25-2007, 11:45 PM
Flexkill

well i am stopping here for the night.....hope she's got more in her tomorrow!:)

http://premium1.uploadit.org/flexkill//32M3.8.JPG
03-15-2007, 09:15 AM
rithina

Hi guys, i just rma my ballistix (new HS) and they got me back an old HS which does not have EPP label on it.. anyone know if the older one is EPP? Both are PC2-8000 CL5 Ballistix.. i wonder if these old stick are fat boy since they are the earlier revision..
05-19-2008, 05:58 AM
angelicavoc

wow...very2 excelen....nice.....
good ram n good ocers.. :)
05-20-2008, 04:58 AM
nut311

Quote:

Originally Posted by angelicavoc

wow...very2 excelen....nice.....
good ram n good ocers.. :)

show me your ballistix buddy
06-03-2008, 12:20 AM
Harshal

This is what I did since my good friend benny started a 4-4-4-XX thread @ my home forum :)

Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [EPP 2.2V] @ 2.7 volts
http://valid.x86-secret.com/show_oc.php?id=369814

KIT is 1.5 yr old and have been doing duty in my home rig. Clocking 4-4-4-XX is diff for sure :D

EDIT:
Some CL3-3-3-XX action ;)
Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [2.2V Stock] @ 498MHz with 2.9V
http://valid.x86-secret.com/show_oc.php?id=371090

Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [2.2V Stock] @ 512Mhz with 2.95V
http://valid.x86-secret.com/show_oc.php?id=371093

Show 100 post(s) from this thread on one page