Guide Thread

Printable View

Show 100 post(s) from this thread on one page

02-26-2008, 02:17 AM
elle

a little info ;) is german but a nice pic :)

Link to the DFI x48

- elle -
02-26-2008, 02:24 AM
Aerou

Quote:

Originally Posted by elle

a little info ;) is but german but a nice pic :)

Link to the DFI x48

- elle -

although blurred, the cooling looks different and new, at least the PWM part ...
02-26-2008, 02:51 AM
adya

Quote:

Originally Posted by eva2000

16FD5 = most likely double sided ;)

well know one knows more about this ram and board than u from what ive read ,so ill go ahead with the order. seems like an awsome board ,cant wait to start .
thanks for the help.
02-26-2008, 03:09 AM
eva2000

Quote:

Originally Posted by adya

well know one knows more about this ram and board than u from what ive read ,so ill go ahead with the order. seems like an awsome board ,cant wait to start .
thanks for the help.

double sided

http://i4memory.com/reviewimages/mem...contact_03.jpg

http://fileshosts.com/intel/DFI/DFI_...3m48s578ms.png

http://fileshosts.com/intel/DFI/DFI_..._bandwidth.png
02-26-2008, 03:17 AM
adya

beautiful ! mine are excatly like that. im happy.
thanks for that .
02-26-2008, 06:02 AM
Jor3lBR

To Ballistix Ram Users (Tracer 8500)

Quote:

Originally Posted by flexy

i dont trust Ram HS at all!! They come all off sooner or later. An idea would be either a) to remove them and screw warranty or b) use something like those strong foldback clips in addition to hold them in place.
http://www.euroffice.co.uk/_image/it...e/250745_0.jpg

clip them at the side so HS wont come off that easily.

That's just a reminder for the new comers to this memory... The heat spreader is a engineering's peace of crap and will loose contact with the chips in about 1-2months, then the mem's can overheat and go bye bye...
02-26-2008, 09:40 AM
Boyu

Any one know how to enable boot selection menu during P.O.S.T without entering bios?.
02-26-2008, 09:46 AM
Praz

Quote:

Originally Posted by Boyu

Any one know how to enable boot selection menu during P.O.S.T without entering bios?.

"Escape" key.
02-26-2008, 11:04 AM
t_ski

Quote:

Originally Posted by Blackwhite

I've got Thermaltake Armor, so it is bigger then yours PC Case.
Tell me please it would fit vertically - the NB heatsink is it not too high?

The Noctua NH-U12P is 126mm wide plus the clips, which stick out another 4-5mm on each side. Also, the height of the bottom fin is 40mm from the base. As long as the lower part of the NB heatsink is less than 40mm from the top of the CPU (which I think it is), you should be OK to overlap it. Is yours the Armor or new Armor+? I had a Xaser VI (which is the same as the new Armor+) and I think you should be OK there.

BTW all - I figured out the audio problem I was having. Simple id10t error :cussing:
02-26-2008, 11:07 AM
Blackwhite

Quote:

Originally Posted by t_ski

The Noctua NH-U12P is 126mm wide plus the clips, Is yours the Armor or new Armor+?

:cussing:

Ok thanks a lot.
Mine is old Armor.
I bought this Heatsink, I hope will be fit :)
02-26-2008, 11:18 AM
t_ski

IDK how similar the layout of this board is to the P35-T2R, but that mobo is listed on the Noctua website as compatible with the NH-U12P.
02-26-2008, 02:43 PM
mike

Quote:

Originally Posted by crazyea

Ok guys, all of this talk of freezing and black screens. I was fine, until I was hexed with all of this discussiom. lol. Now my problems are very substantial.

I recently up graded from my Q6600 to a QX9650.

My issue is this. When I purchased my new cpu, i just pulled the old one and booted up. It worked fine for 7 days. Matter of fact i was able to achieve the results in my sig effortlessy.

I decided to go back to stock. No reason really. Then my system started freezing at the booting progress bar (Vista ultimate x64). Then I tried going back to my stable oc, again, same thing booting while freezing.

I figured somethign was gimped so i tried to do a fresh install. Windows gets to the first reboot and then it freezes at the loading bar again. Every single freeking time.

I pulled the battery for a while, I have reset the cmos, I have disconnected the dvd-rw, I have tried a single new hd instead of my raid array. I have tried all combinations or ram down to one stick. Tried a different video card, different ram, dividers, voltages. You think of it, I have tried it. Nothing works. Always freezing.

One time, after having the pc off for a day, i was able to install windows, but then as soon as I get to the desktop, BAMN frozen. GEEZ.

So then I put my q6600 back in and what do you know? The problems go away.

Now, before you say that my QX9650 is fried, I am now typing with it in my asus maximus, with absolutely no signs of these issues at all. None. Zero. Nada.

So what is up? Is there an issue with the 1/11/08 bios? That is what I a running. I cant think of anything.

Vista + QX9650 is def. a no go on this board - maybe in the future DFI will sort out the issues :down:
02-26-2008, 04:24 PM
Blackwhite

Quote:

Originally Posted by t_ski

IDK how similar the layout of this board is to the P35-T2R, but that mobo is listed on the Noctua website as compatible with the NH-U12P.

The problem could be only with high of NB Heatsink.
02-26-2008, 04:49 PM
jimmyz

Quote:

Originally Posted by mikeguava

Vista + QX9650 is def. a no go on this board - maybe in the future DFI will sort out the issues :down:

Actually it works fine if you disable virtualization and multi XXXX (lol forgot the word) on the cpu section of the bios. once all the updates etc are installed you can enable them again. I believe Origin Unknown was who told me about it.:up:
02-26-2008, 06:04 PM
zsamz_

eva2000 i'm @ 500fsb on 5:6 divider if i switch to 1:1 same voltages i cant boot into windows verry wierd
02-26-2008, 10:36 PM
t_ski

Quote:

Originally Posted by Blackwhite

The problem could be only with high of NB Heatsink.

Right. I just don't have the measurement for that right now. Like I said though - it is 40mm from the top of the CPU IHS and not from the motherboard surface.
02-27-2008, 01:42 AM
quake6

I heard that there is problem with regulation,true? And is there some kind of problems with this board? 85 pages is just too much to read...
02-27-2008, 05:54 AM
t_ski

Try using the search feature at the top of the page to narrow it down. For example, here is a search for "voltage" (only nine pages):

http://www.xtremesystems.org/forums/...archid=5368507

And one for "problem" (only 5 pages):

http://www.xtremesystems.org/forums/...archid=5368548
02-27-2008, 06:17 AM
Blackwhite

I just installed Noctua NH U12P - it fit perfect on this Mobo.

What is yours NB temp?Mine is 60 degree under stress - is it not too much?
02-27-2008, 10:19 AM
Ace-a-Rue

Quote:

Originally Posted by jimmyz

Actually it works fine if you disable virtualization and multi XXXX (lol forgot the word) on the cpu section of the bios. once all the updates etc are installed you can enable them again. I believe Origin Unknown was who told me about it.:up:

sounds like a bios problem to me, which is why i went back to the IP35 Pro...you don't have to do that BS with the Pro and a QX9650.
02-27-2008, 10:32 AM
nles

OMG

I'm so sick of waiting.

First they say got DFI stock on february, then delay till mid of feb. Later on they told me the board will arrive on 29th Feb.

Now they telling me there's no stock arrive and maybe Mid of March can get. They can't give me the actual date, later wait till mid of march no stock also.

Might really go for Asus Maximus Formula.
02-27-2008, 11:26 AM
Ace-a-Rue

i PM'd you, nles!
02-27-2008, 11:38 AM
crazyea

Quote:

Originally Posted by mikeguava

Vista + QX9650 is def. a no go on this board - maybe in the future DFI will sort out the issues :down:

Quote:

Originally Posted by jimmyz

Actually it works fine if you disable virtualization and multi XXXX (lol forgot the word) on the cpu section of the bios. once all the updates etc are installed you can enable them again. I believe Origin Unknown was who told me about it.:up:

Quote:

Originally Posted by Ace-a-Rue

sounds like a bios problem to me, which is why i went back to the IP35 Pro...you don't have to do that BS with the Pro and a QX9650.

So I buy a premium board, a premium cpu, and then I have to mickey mouse it to work? Ridiculous if you ask me. Even with this silly work around, I can install Vista, but then it will freeze more often than not when doing a warm boot afterwards. Only cold boots seem to work ok.

Even with all of the available options in the bios for tweaking, I would have rather had a board that at least works as it should.......
02-27-2008, 11:44 AM
Ace-a-Rue

Quote:

Originally Posted by crazyea

So I buy a premium board, a premium cpu, and then I have to mickey mouse it to work? Ridiculous if you ask me. Even with this silly work around, I can install Vista, but then it will freeze more often than not when doing a warm boot afterwards. Only cold boots seem to work ok.

Even with all of the available options in the bios for tweaking, I would have rather had a board that at least works as it should.......

it's strictly a QX9650 bios code problem with vista...when i had my Q6600 in, it worked fine with vista.
02-27-2008, 12:03 PM
GripS

Quote:

Originally Posted by crazyea

So I buy a premium board, a premium cpu, and then I have to mickey mouse it to work? Ridiculous if you ask me. Even with this silly work around, I can install Vista, but then it will freeze more often than not when doing a warm boot afterwards. Only cold boots seem to work ok.

Even with all of the available options in the bios for tweaking, I would have rather had a board that at least works as it should.......

Welcome to the cutting edge of technology. You get to be the guinea pig.:)

Show 100 post(s) from this thread on one page