so 2400 divider works with ivy?Quote:
Originally Posted by Counter CS
Printable View
so 2400 divider works with ivy?Quote:
Originally Posted by Counter CS
35x 104.22Mhz,because i was getting CPU ratio limited at 35x.
Had to uncheck "Safeboot" and let the SO install the New CPU drivers... only remembered that today.
Yes! my freind !Quote:
Originally Posted by l0ud_sil3nc3
Its all CPU/Memory controler dependent... I already suspected that.
108 BCLK on air easy.
grats manQuote:
Originally Posted by Counter CS
any screens ?
also u can run 2400 divider without moving BCLK i mean 50x100 @ 2400 ???
I have been running my b2 2600k @5ghz 1.4vcore. I got the chance to get a b3 board for a great price and jumped on it. Now I can't get stable @ 4.6. Anyone go from a b2 to b3 and have to change settings?
Quote:
Originally Posted by Counter CS
congratz, that sounds great. :D
i never heard of MIVE B2 but yes B3 changed normally needed a bit more vcore what bios are u running and what settingsQuote:
Originally Posted by Bei Fei
here mine for 5GHz HT 2133 9-10-10-28 1T mem 8GB
all settings on bios
vcore 1,415
vdimm 1,5
vccio 1,08125
vccsa 0,95
pll 1,8
internal PLL disabled (depends on chip)
LLC 75%
VRM 350
C1E and EIST enabled
cheers and hope u get it stable
Sergio
I think now i can post someting about ivy...Quote:
Originally Posted by andressergio
http://img441.imageshack.us/img441/8...11726spi8m.png
why only 4C 4T @ 4,3ghz ? :confused:
Alright, been messing with my M4E and 2600K. I'm having trouble getting 5.0 stable at regular voltages and temps. I can get it Prime95 stable at 1.5V and 88C (on liquid...), but that's not ideal obviously. Opinions?
(I did try the settings listed a few posts up, but no luck)
obviously your chip is not as good as the chips from the other members here, so take your multi and voltage down until your chip is stable again :rolleyes:
No reasons, i always turn off HT when i want to test memorys.Quote:
Originally Posted by Sauron_Vie
I cant run 2600mhz its like impossible... maybe crappy BIOS or Memory controller.
Always possible, but I don't particularly care since Prime95 is an unrealistic load :D Was just wondering if I was missing a setting.Quote:
Originally Posted by Sauron_Vie
5ghz prime @ 88c load? You must be at like 1.6v or something if youre watercooled. Something wrong there. What's your loop and ambient?
Lol, yeah. 1.5V. I've got SR1-360 push/pull, EX240 (1 fan push, lol), D5 w/ BP top, 2x 7950s, 2600K (EK Supreme HF). Maybe I should turn up the D5 pump from 2?Quote:
Originally Posted by PiLsY
ok, thx :)Quote:
Originally Posted by Counter CS
New Bios 3208 @ asus site. Kinda weird updating, did like 2 updates, one on ez utility, and anotherone after reboot. Looks good in the first impression. Didn't try nothing fancy. Cheers.
i updated and keep getting error 72 on LCD...i even tried ROG update and still the same :(
***something's very wrong i used all methods and same 72 error...
Really another buggy 32XX bios?Quote:
Originally Posted by andressergio
Not sure what 72 is I will look it up when I get back to house, but I don't think I have ever gotten that one.
What controller to use on this mobo, regarding lan ones?
Which is better quality and why?
manual says initialize PCH devices i did all but nothing im using 2302 on the other bios...thats the bios i installed 3202 and recovered maybe its wrong but not even 2302 works on it now...i have 2 new bios chips will put one lazy now...Quote:
Originally Posted by l0ud_sil3nc3
BIOS 3202 did exactly the same.Quote:
Originally Posted by FedericoUY
like 2 or 3 updates, looked like it was 2.
1 before reboot, another after reboot, but it was weird update i was think, omg the update gone wrong, waited a minute and tchanan... second update and it was ready to go with my ivy. :clap:
What the change log on this one ?
I don't know the changelog, but it performs horrible with memorys and 2600k. Tried 2 kits and it's awful. Back to 2302.Quote:
Originally Posted by Counter CS
well i must say that this BIOS finally borked my first BIOS chip...i have 2 replacement and how funny NONE of both chips from EBAY on the link on this page works PC on off endless boot loop im MAD cant believe this crap...i took the original bios with an extractor and one leg broke, so im on only one bios
this are the chips catalogued for MIVE on EBAY
to the LEFT EBAY chip to the RIGHT original MIVE BIOS i think i will have to solder that leg and put it :(
http://img593.imageshack.us/img593/7740/biosb.png
Uploaded with ImageShack.us
ok i repaired the broken leg :) my soldering skills are good so i used them bios running nice
http://img842.imageshack.us/img842/8606/p1120923e.jpg
Uploaded with ImageShack.us
PLEASE ASUS FIX the 3XXX bios they're really bad !!!
I bought the same MIVE bios chip off ebay as you did "Winbond" and doesnt work for me either. Fans just spin for second then off over and over. I told the seller and he sent me another one free of charge but still the same issue. Anyone know where to get working replacement bios chips?