Use the multi 19 and bump up the blck to 210, or use multi 20 and bump up the blck to 200, see which one works better.Quote:
Originally Posted by nyeah
Printable View
Use the multi 19 and bump up the blck to 210, or use multi 20 and bump up the blck to 200, see which one works better.Quote:
Originally Posted by nyeah
I keep all my lights cut off. I liked them when i first got the board then it got annoying after a while. Only one i haven't got to turn off is the supremefx x-fi blue led.Quote:
Originally Posted by Tigris STI
Good Day
You have to disable all leds in the bios :up:Quote:
Originally Posted by Tigris STI
Anyone else on this 1403 bios ? I seem to be able to run lower volts on the CPU then before to keep her stable... till now I needed 1.28ish set in the bios. It's still priming at 1.275 ( I urgently need back my DMM to verify the correct volts ) Maybe this bios overvolts even more than the older generation...
Anyone an idea or can anyone verify with his DMM...
mpower1001, I don't even know how to thank you !!! :up: :buddies: I simply followed your advice and it worked - all the lights on the mobo are out (except for the blue LEDs on SupremeFX X-Fi & on the VTT card) Thank you once again :wave:Quote:
Originally Posted by mpower1001
No, i can't confirm this.Quote:
Originally Posted by Leeghoofd
With my high accurate DMM (0.05% over the 0-2V Range) Bios 1403
overvolts in the same way as Bios 1306 or 1204. +0.02 - +0.03 Volt.
Helli
Maybe that's it, I started to use this board again and I was coming from 11series bios... I needed 1.28ish Vcore set then to get prime stability, anything lower would have freezed in minutes. Now with 1403 I can run sub 1.27ish volts. Really puzzled...
Thx for the input, much appreciated
hi guys, i just moved to Windows 7 RC1 x64..the Xi-Fi Drivers for windows vista x64 keep giving me an error saying that it cannot detect the necessary hardware when i click on the audio console...4
any idea what might be the problem? i have all the latest drivers installed. thanks in advance (:
IIRC, there's a Beta W7 Driver for Xi-Fi soundcard at Soundblaster.com.Quote:
Originally Posted by applescript
Where are you guys getting the 1403 bios from? I only see 1306 on the website.
The first page of this thread?Quote:
Originally Posted by dreamaxx
;)
thanks but actually dling the driver from the asus website and executing it under windows vista SP1 compatibility mode did the trick (:Quote:
Originally Posted by jcniest5
not sure ever since i changed CPU to D0 and updated BIOS from 0903 to 1306
System POST with MASSIVE Lag! updated to 1403 beta and still the same...i have to wait ages for the system to POST...Any advice?
thanks in advance
Oh right :) lol.
Quote:
Originally Posted by bullydog
They changed something on 1306 and up. You'll notice the splash screen takes a bit longer but not too big of a deal. 1306 is the best bios so far for me so I can live with it as I only reboot when I have to and mainly go in and out of sleep mode. :)
Thanks BabyFace, Yeah i did notice that the splash screen takes longer to load and it became bad to worst after a few weeks the splash screen is taking longer and longer, i have gone back to 1206 and seems to be some improvement in terms of waiting time...Quote:
Originally Posted by theonlybabyface
Thanks for the recommendation! Enermax arrived yesterday and I'm loving it, or actually my GTX 280 is. Starts from a cold boot every time. No more restarting/blank screens... now only the time will tell how long it will last - i do have high hopes though :) And now that I'm sure it was the PSU that failed i can get a replacement for future use.. and perhaps a D0 which is like an itch lately :D
Where's my share? HHehee...glad it works great for ya. It'll last a long time, but Enermax doesn't provide lifetime warranty on their PSUs, which is one of the reasons why I went with Prudent Way instead. They provide lifetime warranty on their PSUs, which is the first.Quote:
Originally Posted by julius
I using everest to read my NB/SB temps, it is reporting 48/46c my ambient temp is around 28c.
I did replace the ASUS TIM with some OCZ freeze and Sekisui tape.
I wondered what everyone else is getting with theirs?
Thanks
Did you mean Enermax Revolution80+? If so i'm happy the board loves it cos i'm getting it also...1,25Kw version... I'm waiting for 975EE.... next batch will hit my local store on tuesday.Quote:
Originally Posted by julius
55/53° under load, with default voltage and Asus TIM, room temp about 26°.Quote:
Originally Posted by affiliate13
Thanks Brama,Quote:
Originally Posted by Brama
Did you replace the TIM on yours when you got it?
I use 1403 as I own a Xeon cpu and for me it is very similar to 1306, but I never tested so deeply.Quote:
Originally Posted by Leeghoofd
No, it is the original one.Quote:
Originally Posted by affiliate13
pardon me but what is TIM ?:)