[Project] :::Flow::: (SNiiPE's V2110) - Resurrected

Printable View

Show 100 post(s) from this thread on one page

06-11-2009, 08:05 AM
SNiiPE_DoGG

Quote:

Originally Posted by paul_

*drool* I would LOVE to have some of Permafrost's and Flow's pictures as wallpapers at 1920x1200... I'm sure lots of others would too.

Wait a minute... An air cooler on the CPU? You mean to tell me that project flow doesn't have total and utter waterflow? Aww... Regardless, I am on the edge of my seat on this one!

I will try to get some 1920x1200's together tonight...

the air cooler is going away soon :p: I am setting up a water loop on the test bench for the cpu that will accommodate the rad being dumped in a salted ice water bucket :D
06-11-2009, 08:15 AM
paul_

Quote:

Originally Posted by SNiiPE_DoGG

I will try to get some 1920x1200's together tonight...

the air cooler is going away soon :p: I am setting up a water loop on the test bench for the cpu that will accommodate the rad being dumped in a salted ice water bucket :D

:D:D:D
I think I just wee'd myself a bit...
06-11-2009, 08:25 AM
The Water Dog

"have to keep my eyes on"
Be careful with :banana::banana::banana::banana: pictures Sniipe:D
06-11-2009, 08:37 AM
millertime359

Quote:

Originally Posted by SNiiPE_DoGG

I will try to get some 1920x1200's together tonight...

the air cooler is going away soon :p: I am setting up a water loop on the test bench for the cpu that will accommodate the rad being dumped in a salted ice water bucket :D

:ROTF: just make certain to leave room for the beer :up:
06-11-2009, 08:38 AM
ctsoccer13

Quote:

Originally Posted by SNiiPE_DoGG

I will try to get some 1920x1200's together tonight...

the air cooler is going away soon :p: I am setting up a water loop on the test bench for the cpu that will accommodate the rad being dumped in a salted ice water bucket :D

Your rad is going to live in a bucket? Or is that just for testing?
06-11-2009, 08:40 AM
SNiiPE_DoGG

Quote:

Originally Posted by ctsoccer13

Your rad is going to live in a bucket? Or is that just for testing?

hehe, just for pushing my Phenom II on the test bench :up:
06-11-2009, 08:47 AM
ctsoccer13

Quote:

Originally Posted by SNiiPE_DoGG

hehe, just for pushing my Phenom II on the test bench :up:

Any reason you chose the Phenom II over the ever-so-popular i7?
06-11-2009, 09:15 AM
SNiiPE_DoGG

Quote:

Originally Posted by ctsoccer13

Any reason you chose the Phenom II over the ever-so-popular i7?

i7 is too hot, this (phII 955 + 2 x4890's) is going to be single loop with a TC PA140.3
06-11-2009, 09:43 AM
ctsoccer13

Only one PA140.3? With dual 4890s, I would've expected more rad. I'll be interested to see how your temps are.

BTW: I noticed you go to RPI and your avatar (assuming that's your frat). I have some friends who go to RPI that I interned with at Cisco one summer. I think the two guys are in SAE and the girl is in a sorority, just don't remember the letters.
06-11-2009, 09:46 AM
YMAA

Quote:

Originally Posted by ctsoccer13

Only one PA140.3? With dual 4890s, I would've expected more rad. I'll be interested to see how your temps are.

4890s run cooler than 280s IIRC, and PII runs ice-cold compared to i7. A 140.3 should be plenty of dissipation when paired with decent fans.
06-11-2009, 09:50 AM
SNiiPE_DoGG

the 140.3 should have close to 1000w of heat dissipation at 10c delta and considering that the PHII + 2x 4890 is less than 600w I think I will be able to punch out some nice results :)
06-11-2009, 09:53 AM
ctsoccer13

Quote:

Originally Posted by YMAA

4890s run cooler than 280s IIRC, and PII runs ice-cold compared to i7. A 140.3 should be plenty of dissipation when paired with decent fans.

Ah, I had no clue AMD/ATI was so cool (pun intended).:ROTF:
06-11-2009, 09:57 AM
shazza

From my experience so far with the PII 955BE, SNiiPE_DoGG won't have any issues at all with the 140.3 rad. I'm running 2 x Magicool 240 rads and Low Speed Fans, with a 4870X2 in the loop, and temps are so low I thought something was wrong.
06-11-2009, 09:59 AM
SNiiPE_DoGG

Yep :) these are the fans I got for the rad, its a PA so these should pull some pretty good amount of air through.

http://www.performance-pcs.com/catal...ducts_id=20771
06-11-2009, 11:00 AM
neo_rtr

Amazing stuff you got their man..
06-12-2009, 02:11 PM
sniperbob

great looking pics (again) SNiiPE. in an unrelated question to your build log, hows summer treating you in MA?
06-12-2009, 02:50 PM
SNiiPE_DoGG

Quote:

Originally Posted by sniperbob

great looking pics (again) SNiiPE. in an unrelated question to your build log, hows summer treating you in MA?

Thanks :)

Yeah summers is good, workin, and pulling my hair out over getting this project done soon enough :rofl:
06-12-2009, 03:28 PM
tamu80

This looks awsome Snipe....your skill and attention to detail go without saying....but how are you going to up the ante over Permafrost:shocked::shocked::shocked::shocked:
06-12-2009, 04:03 PM
Rise

fantastic hardware coloring. that black on black on blue action is going to be sah-weeeeeeeet! i'm waiting impatiently for more updates :)
06-12-2009, 11:45 PM
SNiiPE_DoGG

Quote:

Originally Posted by tamu80

This looks awsome Snipe....your skill and attention to detail go without saying....but how are you going to up the ante over Permafrost:shocked::shocked::shocked::shocked:

Thanks :)

There are a lot of things modding wise I wish I had done better on permafrost, its what keeps me going I guess :)

Quote:

Originally Posted by Rise

fantastic hardware coloring. that black on black on blue action is going to be sah-weeeeeeeet! i'm waiting impatiently for more updates :)

Thanks Rise!
updates you said?

here is a single pic, sorry but I have just perfected my technique which took me longer than expected, more updates are coming up fast as I have recieved the end mills for the router from MCmaster and a whole bunch of goodies from P-pcs and Sidewinder :)

http://img8.imageshack.us/img8/33/wire0008.jpg
06-12-2009, 11:46 PM
JoeChuo

Love that high res pic! Awesome! It's a perfect match ... photography and modding.
06-13-2009, 01:08 PM
570091D

Quote:

Originally Posted by SNiiPE_DoGG

here is a single pic, sorry but I have just perfected my technique which took me longer than expected, more updates are coming up fast as I have recieved the end mills for the router from MCmaster and a whole bunch of goodies from P-pcs and Sidewinder :)

i love mcmaster, and granger. raw materials make me happy! :D
06-13-2009, 01:54 PM
Nashaz

holy shiat.

I wish i had a photo studio like that. Brilliant pictures m8. :up:
06-13-2009, 01:56 PM
millertime359

You going to sleeve those S_D? That had to be fun rewiring that all one color.
06-13-2009, 07:31 PM
zanzabar

Quote:

Originally Posted by millertime359

You going to sleeve those S_D? That had to be fun rewiring that all one color.

hes rewiring instead of sleeving

Show 100 post(s) from this thread on one page