My mounting kit

Printable View

Show 100 post(s) from this thread on one page

12-22-2008, 04:32 PM
Buckeye

Thanks Duniek !!
Everything arrived safe and sound here :)

http://img360.imageshack.us/img360/5493/img0819yn7.jpg

http://img362.imageshack.us/img362/5357/img0820sp0.jpg

http://img509.imageshack.us/img509/5474/img0821ww3.jpg
12-22-2008, 06:07 PM
sdumper

I ordered as well cant wait to see it up close.

Top Notch work :)
12-22-2008, 09:04 PM
teyber

Quote:

Originally Posted by Buckeye

Thanks Duniek !!
Everything arrived safe and sound here :)

http://img360.imageshack.us/img360/5493/img0819yn7.jpg

http://img362.imageshack.us/img362/5357/img0820sp0.jpg

http://img509.imageshack.us/img509/5474/img0821ww3.jpg

hey duniek, the milled out recession in the hold down looks great. Im not sure the distance from the bottum of the hold down to the motherboard but this would make it shorter(may get in the way of some motherboards heatsinks), or you could save $$ and make it shorter lol and not have the recession.

just a thought
12-22-2008, 09:13 PM
Buckeye

It fit my EVGA X58 perfect :)
12-23-2008, 02:19 AM
Duniek

finally :D

@ teyber
your mountings is like mine rev1.0 mounts (for evaps with seger rings) and holddowns is on 20mm height of muff)
rev2.0 with foam inserts like ordered by buckeye, and in my vapo ls kits has ~43mm so I must make holddowns with milled area bcoz in other way screws will be too short to mount it

http://img364.imageshack.us/img364/945/123rv3.jpg
12-23-2008, 11:01 AM
teyber

gotcha :) it looks very sexy that way though
12-24-2008, 11:35 AM
marleyman

Ordering

Hi! I have just built a new system based around an Asus Rampage II Extreme Socket LGA1366 and an Intel Core i7 Extreme 965. Currently I am cooling the CPU with my Coolit Elite thermoelectric cooler which I had planned to use for the dual HD4870 X2s. I have a Vapochill LS and had hoped that a kit would be released by now to adapt it to the new motherboards or that I would be able to build one myself. It looks like you do beautiful work however.

edit - read the phase sections rules on sales - there is no discussion of sales allowed on public forums. Do this in private and do not discuss before or after results. thanks
12-27-2008, 03:12 PM
firerx

Quote:

Originally Posted by Buckeye

It fit my EVGA X58 perfect :)

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:
12-27-2008, 05:57 PM
Buckeye

Yeah the Jinu Phase is holding strong with the 965XE :up:

Here is the RAM I got, I went the cheap route first. I think there might be better out there that others are using.

Patriot Viper Tri Channel 3GB PC12800 DDR3 Memory - 1600MHz
12-27-2008, 05:59 PM
Buckeye

Quote:

Originally Posted by firerx

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:

Did Jin install a Chilly1 Evap on that unit ?
12-27-2008, 07:19 PM
NCspecV81

I love this mount! High quality stuff! The price is right, and the wait is well worth what you get! Great job duniek! =o)

http://www.overclock.net/gallery/dat...asemounti7.jpg
12-27-2008, 07:30 PM
Jor3lBR

Mount for Gigabyte P45 + CryoZ

Hey Duniek,

I was wondering i you have any mounts compatible with the Gigabyte Ep45-UD3P and the OCZ Cryo-Z Phase Change unit? I would like to replace the original one...
12-27-2008, 09:02 PM
Duniek

Quote:

Originally Posted by firerx

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:

man, so at all you wanted mach 2 kit? or full new enclousure for jinu/chilly evap like buckeye has?
lmk on PM pls

Quote:

Originally Posted by Jor3lBR

Hey Duniek,

I was wondering i you have any mounts compatible with the Gigabyte Ep45-UD3P and the OCZ Cryo-Z Phase Change unit? I would like to replace the original one...

sure, possible to make that mounting (Can you post some pics or naked evap and mounting itself with dimension of it here or on PM?)
depend what do you want (only white holddown instead of crappy orignal plastic from CRYO-Z or full mounting like as my vapo ls kit)

lmk
12-28-2008, 05:33 AM
M3kk

Hey Duniek, still dont got my mountings :(.
12-28-2008, 08:18 AM
Jor3lBR

Quote:

Originally Posted by Duniek

sure, possible to make that mounting (Can you post some pics or naked evap and mounting itself with dimension of it here or on PM?)
depend what do you want (only white holddown instead of crappy orignal plastic from CRYO-Z or full mounting like as my vapo ls kit)

lmk

Is the full mounting like this Buckeye received: http://img362.imageshack.us/img362/5357/img0820sp0.jpg

If so is it easy to assemble?

I will return to you with all the measurements.

Thanks.
12-28-2008, 08:31 AM
Buckeye

Yeah mine has a Jinu Evap which is a bit different than a Chilly1, thats whay I asked. I ordered 2 extra Chilly1 enclosures, plus a Jinu one.

The Jinu Evap is ~1 inch tall
Chilly1's are ~1.125 inch tall

This is for the inside Muff insulation. Installing these are just like installing any other Evap enclosure, very simple :)
12-28-2008, 09:20 AM
Jor3lBR

Quote:

Originally Posted by Buckeye

Yeah mine has a Jinu Evap which is a bit different than a Chilly1, thats whay I asked. I ordered 2 extra Chilly1 enclosures, plus a Jinu one.

The Jinu Evap is ~1 inch tall
Chilly1's are ~1.125 inch tall

This is for the inside Muff insulation. Installing these are just like installing any other Evap enclosure, very simple :)

That's interesting thanks for the info Buckeye, if the economy permit I will go with the complete kit.

The Cryo-Z overall performance is 100% depended on the way it's mounted. And with that crap cheap plastic bending all over the place and touching mosfet cooler etc is impossible to make it work with the UD3.

With my DFI the problem wasn't so obvious as the X48 had a big clearance to mount almost anything around the socket.
12-28-2008, 10:03 AM
Duniek

Quote:

Originally Posted by Jor3lBR

Is the full mounting like this Buckeye received: http://img362.imageshack.us/img362/5357/img0820sp0.jpg

If so is it easy to assemble?

I will return to you with all the measurements.

Thanks.

let me know about measurments ;)
all my mouuntings is universal, for diffrent evaps I change only foam insert ;)
12-28-2008, 11:33 AM
Buckeye

When I mounted my CRYO-Z on my EVGA 790i MB I had to cut off the extreme ends on the hold down for it to fit. The mounting supplies that came with it are pretty cheaply done, workable tho.

Dunieks kit fit very well and I didn't have to mod anything to make it work.

I used a full art eraser insulation with a layer of blue shop towels and 1 layer of foam.

Motherboard is prepped front side for a EVGA X58 SLI & 965XE.
I did use Dunieks back plate and foam on this. I found that when I was torking everything down nice and tight that the back plate was bending a lot so I losened it up a lot, didn't seem to make any differance. I would suggest a full metal back plate for furture builds.

My Jinu Phase is working very nice, topping out at about 4.8ghz for now. I need to fine tune this baby still. I would so love a nice cascade as these chips seem to like it really cold. No ice build up yet and everything is staying nice and dry so far.

http://img116.imageshack.us/img116/2416/img08332jq6.jpg

Back side has a metal plate there, so it was packed to keep any air out.

http://img520.imageshack.us/img520/4746/img08262io5.jpg

Front side finished up.

http://img247.imageshack.us/img247/7571/img08342kb1.jpg

All done a Phase mounted and ready for it's first test run.

http://img520.imageshack.us/img520/409/img08352rz7.jpg
12-28-2008, 11:57 AM
Jor3lBR

@Buck

Neat $$$$! Thanks for the pics. Those things look soooo sturdy compared to the crappy Cryo-Z plates. I love the BIG and TALL solid bolts too.

May I ask what is that cloth material you used between the Neoprene and Eraser?
12-28-2008, 12:07 PM
Duniek

Quote:

Originally Posted by Jor3lBR

May I ask what is that cloth material you used between the Neoprene and Eraser?

toilet paper I guess, lol
12-28-2008, 12:20 PM
Stuffie

Quote:

Originally Posted by Duniek

toilet paper I guess, lol

Looks like shop towel to me.
12-28-2008, 01:02 PM
Buckeye

Quote:

Originally Posted by Duniek

toilet paper I guess, lol

HAHA !

Quote:

Originally Posted by Stuffie

Looks like shop towel to me.

Correct !
12-30-2008, 06:30 PM
Jor3lBR

Measuares for Duniek (Cryo-Z update mount)

Quote:

Originally Posted by Duniek

let me know about measurments ;)
all my mouuntings is universal, for diffrent evaps I change only foam insert ;)

Here you go Duniek:

I made some cuts to the original mount so the measures are as is.

With all the cuts I still hit the NB and mosfet areas with the mount :down:

I need a new set that will make a solid mount and still be free of those components.

Tell me if you need more pics or more details to make my kit, please PM me with the price. Thanks!

I'm pretty sure the Cryo-Z is a Chilly1:

1. Hitting everything:
http://i43.tinypic.com/2qjm929.jpg

2. Evap 3,1cm
http://i44.tinypic.com/mhyo42.jpg

3. 9,5cm
http://i40.tinypic.com/fwhm3a.jpg

4. 11cm
http://i44.tinypic.com/mhdo3r.jpg

5. 6,4cm
http://i43.tinypic.com/9hruhs.jpg

6. 6,6cm
http://i40.tinypic.com/2r6kzt2.jpg

7. 4,1cm or 1 1/2inch diameter
http://i43.tinypic.com/2mxirn4.jpg
12-30-2008, 06:33 PM
jcool

I just ordered Duniek's last lga1366 chilly1 mounting kit (the last he had in stock anyways) :wasntme:
Can't wait for it to arrive :D

Show 100 post(s) from this thread on one page