Unlock Conroe Core 2 Multi. Using Intel 975BX!!!

Printable View

Show 100 post(s) from this thread on one page

08-11-2006, 06:21 PM
Blue078

Quote:

Originally Posted by Ace-a-Rue

Blue, will crystalcpuid allow to adjust multi downwards without EIST...AND...is this EIST on the cpu or northbridge?

This is how you do it on the BadAxe, I asume it would work with other boards.
http://www.xtremesystems.org/forums/...ght=MSR+Editor
08-11-2006, 06:25 PM
Sanuska

Nevermind, just realized people were talking about this video above this post, IGNORE ME >.>
08-12-2006, 12:21 PM
THE JEW (RaVeN)

Quote:

Originally Posted by charleski

I think we should all thank The Nemesis. He made it quite clear about where he got the information and what it was. Unfortunately, it turns out this was coming from an Intel rep who didn't know what he was talking about. That reflects on Intel, not on anyone who reported what he said.

If it had been true it would have been very big news indeed, and reporting it to us merely shows a regard for this forum that we should respect.

Thank you for your efforts The Nemesis.

Agreed. The video makes it quite clear that he was just reporting on what he was told.
08-12-2006, 02:16 PM
MrMajestic

Quote:

Originally Posted by DEVIL_DK

i have done the mod on my bad axe when i had my E6700 ES i had vcore settings after i got my retail E6600 no more vcore settings.

I have the vcore setting in BIOS with my E6600 ES but it doesnt do anything :( Pain in the butt to do it using the ITK. Gotta get me a condictive pen. Hmm, anyone know how to remove conductive ink by the way. just in case I have to RMA this sucker at some point.
08-14-2006, 02:04 PM
dpedini

I live in Texas. and Yes this works to unlock some Bios Features just use a conductive pen and short the last two pads its right behind the BIOS jumpers it has an OC onthe board. IT WILL NOT UNLOCK THE MULTI it will give you access to get enhanced power slope, FSB override (800,1066,1333) vcore and a couple other things

it works I will take a picture of the board is a few minutes

DP
08-14-2006, 02:39 PM
Pete

The vid also has him say all bad axe's at the end!! Thats a big mistake for one big nasty sweaty yank talking out of his deryair i say.

So i have sent an e-mail asking with a link to the vid and made it very strongly worded. Also have cc the mial to my ex whom works in the ES dep @ Intel to see what she can dig up!

It seamed from the vido he was under presure as all wanted to rape away at him and the rig!

FCG posted this pic!

http://members.cox.net/kjboughton/XBXJump.jpg

J8J4 is the MFG Jumper ie: that small squar box nowt eles! The other bit that FCG has marked is for a Cap!

I await a suden reply off Intel! if i don't get anyhting in a few days i'll call em!
09-10-2006, 11:30 AM
Helix

Quote:

Originally Posted by Pete

The vid also has him say all bad axe's at the end!! Thats a big mistake for one big nasty sweaty yank talking out of his deryair i say.

So i have sent an e-mail asking with a link to the vid and made it very strongly worded. Also have cc the mial to my ex whom works in the ES dep @ Intel to see what she can dig up!

It seamed from the vido he was under presure as all wanted to rape away at him and the rig!

FCG posted this pic!

http://members.cox.net/kjboughton/XBXJump.jpg

J8J4 is the MFG Jumper ie: that small squar box nowt eles! The other bit that FCG has marked is for a Cap!

I await a suden reply off Intel! if i don't get anyhting in a few days i'll call em!

any news?
We can just forget any hope, don't we :slapass: ?
:slap:
09-10-2006, 11:38 AM
AndrewZorn

i thought we found out this was false
i dont think wed forget about turning an E63 into an X68 for free
09-10-2006, 11:50 AM
yotomeczek

Quote:

Originally Posted by AndrewZorn

i thought we found out this was false
i dont think wed forget about turning an E63 into an X68 for free

Yeap - it DOENS't WORK :(
It is like bios lock at default settings - nothink possible to change
09-10-2006, 12:17 PM
Revv23

one thing to remeber is that both asus and bigtoe claim it can be done, so while im sure this isnt it, i wouldnt be too surprised if it happened someday.
09-10-2006, 02:17 PM
specv

the chip itself is locked, nothing to do with the bios. If you can hack the CPU itself well then maybe yes it would be possible
10-01-2006, 10:57 AM
Alchemist

Unlocking Multipliers Upwards

Asus apparently claim to be able to unlock multipliers upwards on some chips with new bios. :bounces:

The article claims that Asus has stated. (Read Below)

Even more exciting is that ASUS says they have found a way to unlock up or down most Conroe chips.

Some Conroe chips also unlock at the top, allowing ranges to about 14x. None of our Conroe chips unlocked up, but you may be one of the lucky ones who have a Conroe that unlocks both down and up.

ASUS tells us that many Core 2 Duo chips also unlock upwards, but the upper limit is around a 14X multiplier with those chips that do unlock in both directions. If true, we're certain those chips that can unlock completely will be quickly figured out by enthusiasts and those models and steppings will become the most highly desired Core 2 Duo chips.

http://anandtech.com/mb/showdoc.aspx?i=2822

If Asus has found a bios to unlock CPU multipliers, then a modified bios could do the same for BadAxe.

:clap:
10-01-2006, 11:46 AM
Alchemist

Is any one still reading this thread? :rolleyes:
10-01-2006, 11:52 AM
kiwi

These statements are kinda stupid, what does it mean you might be the lucky one, heh :D

Only XE unlock up, that's it, other conroes will not unlock up
10-01-2006, 12:01 PM
tommo123

isnt that an old article from august?
10-01-2006, 12:03 PM
sdumper

Man Im a little late reading this but I sincerly hope this but I thought this was a dead story with no proof.
10-01-2006, 12:52 PM
[timko]

Quote:

Originally Posted by Alchemist

Is any one still reading this thread? :rolleyes:

Well now that you bumped it, a whole new bunch of people are going to read about it. Congratulations :chicken:
10-01-2006, 12:56 PM
Planet

The guy was also at the PDX lan in Portland. He was a total noob. There are other videos of him trying to fiddle around in the bios and the board doesnt boot its pretty funny.
10-01-2006, 01:22 PM
The Nemesis

Guess I need to pm a mod to close this thread.............
10-01-2006, 02:41 PM
2fink

Quote:

Originally Posted by The Nemesis

Guess I need to pm a mod to close this thread.............

before you do this, you should make your sig much smaller ;)

but sending a pm would be a good idea, before this ends in a flame-war!
03-09-2007, 02:50 AM
Alchemist

Quote:

Originally Posted by The Nemesis

Guess I need to pm a mod to close this thread.............

Well, where is the mod to close this thread?

:confused:

Show 100 post(s) from this thread on one page