Ok my HTT is running 295.6mhz and my ram is running at 255.0mhz
and 295 X10= 2950ghz
Printable View
Ok my HTT is running 295.6mhz and my ram is running at 255.0mhz
and 295 X10= 2950ghz
Wow, it's amazing what some cool temps can do for these CCB1E. Pretty cold in here right now, idle is about 20C (no coldbug btw at 334htt with ccb1e 0608mpmw). load is 28-30, running prime at 3006@1.375v.. it would always bsod here in warmer temps. Man, if I had a waterchiller to keep water at a constant 15C, I'd be set :D
Quote:
Originally Posted by Malkec
well i get like 45 with 1.5 volts. my room is hot however. we dont use much A/C plus i have a very big window to the sunlight.
i have to have 2x120mm on my tunic to get temps like that @ 1.55v 2.8ghzQuote:
Originally Posted by Malkec
I'm not sure if my temps are considered hot. I think everyones temps get close to 50'C after hours of prime in the warmer parts of the world. 2.8 ghz @ a mere 1.4vcore dual core prime stable; I'm happy :woot:Quote:
Originally Posted by Malkec
I will try to push 2930 @ 1.4v tomorrow and get it dual prime stable. :)Quote:
Originally Posted by The Nemesis
Make sure you try lower htt multi's, once mine goes past ~340htt I need to lower to 2.5 or it freezes
dang, i wanna build a custom wc kit now. i want 3 GHz out of my 170. i can do 2.8 @ 1.5v all day long, but 2850 is so hard to achieve for some reason.
45c load at all times too.
Hey blazin how goes it?!Quote:
Originally Posted by blazin-asian
I know what you mean! i want to get water on my 165 to try to get past 2.8. 2.8@1.47 haven't got 2.85 stable yet. Know what it is though? core 0!! its stable at 2.8 and 1.47. Core 1 is stable at 2.8 and 1.42v!! Bugs me!! Idling at 42°C though
hey mastacator. i see you hang out here as well :D
core 1 is the weaker one for my opty. i can prime up to 2.9 or so on core 0, but 1 is a real slacker. no time to burn it in now because i have to pack up my desktop to move home at the end of the semester. just using the laptop for the next week or so.
yeah, my core 0 is the weaker one, but wow, 42*c idle!!??Quote:
Originally Posted by Mastactor
something needs to change, room temp or case ventilation or something
Yeah, I stumbled on to the site while researching this opty stepping.Quote:
Originally Posted by blazin-asian
I wish there was a way to help out one of the cores when one is weaker than the other.
So how,s East Lansing right now? I presume you going to MSU? I spent a few years in Michigan, 6 months in east lansing actually. Should be pretty nice this time of year.
I know, the idle started going up when the voltage was put to it, I think I am going to reseat my HS and probably check my PWMIC HS contact with the mosfets.Quote:
Originally Posted by nobody_here
I'm hoping to get my watercooling off the ground in a week or so.
well, after a few more days, i've had some trouble keeping it stable between 2900 and 2950. it definatly has to do with heat issues. i left the window open last night, it was 35F outside, and my load temps were like 43c @ 2950 @ 1.5v, primed all night, i shut the window in the morning and 20 minutes later it failed.
sold mine. ordered another one ill keep yall updated on what comes.
Friends for the 3 Gig Dualprimestable you need 1,35Vc at 2800mhz.
No chance to get 3 Gig with water if you need mor than 1,4Vc for 2800Mhz.
I get the 2.8 w/1.4 I can boot & run all kind of apps & games @ 3ghz but prime fails instantly on any voltage 1.4-1.55v. Any suggestions?Quote:
Originally Posted by Rufus7
Is you Ram 1:1 running?
Try it with an Divider. Some Chips don´t like high Ramclocks.
183 or 166.
You need this
http://img141.imageshack.us/img141/7...rime166.th.jpg
To get this
http://img150.imageshack.us/img150/7...e166tei.th.jpg
Rufus 1.456v in CPU-Z, what did you set in BIOS?
updated the db today if you want to check it out
haha, if by nice you mean all the short skirts and short shorts are coming out of their closets then YES. its VERY nice, lol.Quote:
Originally Posted by Mastactor
but back on topic.....42c is VERY high for idle. is your pc by the heater or something? dang. i can pump like 1.55v and still keep under 35c idle. then again my pc sounds like a lawnmower with a jet engine :banana:
Ha Exactly!!Quote:
Originally Posted by blazin-asian
Ha!! No its not by a heater!! I dont' know what the deal is. I have an AC freezer 64 on it, and it has kept it pretty cool until lately. I'm getting water on it soon, hopefully, anyway. So I jumped on the bandwagon and bought from monarch last week. Hopeing to get a CCBBE 0610 stepping, should be here today.Quote:
Originally Posted by blazin-asian
well, i am currently testing my CCBWE 0609 FPAW, and it certainly isn't a good clocker. Currently trying 2.7 @ 1.4v. Will inform you asap.
I'm pretty sure this holds the record for "closest two cores as far as ocing is concerned"
http://img441.imageshack.us/img441/2...ores1oi.th.jpg
I think that record goes to Clint. He can't even get his cpu to make a core fail. It'll just freeze or reboot instead. Each of his cores are identical. It's really frightening.Quote:
Originally Posted by Repoman
Hey got a new 165 today.
Here it is:
New Opty
What do you think?
Should I put it in and give it a run?
Yea, if you're lucky, you might get to 2.8Ghz on that chip. I have one and it would not budge past 2.7Ghz@1.45V...I got a 165 CCBBE 0610 and I'm gonna sell the 170 soon.Quote:
Originally Posted by SPivX
By the way, the 165 CCBBE 0610 is trippin me out. I can get to 2.745Ghz (304 HTTx9 1:1 RAM!! G.Skill 4400) at 1.34V...I'm thinking, whoa, this chip beats my last opteron at incredibly low V. But will not prime anything past this speed. What I do is first to a quick check by running long ftt's and SuperPi 2M at the same time.
I got this chip up to 3.006Ghz at like 1.48V, but, like I said, absolutely nothing with prime about 2.74Ghz, NO MATTER WHAT VOLTAGE. I'm stumped. And I've played with the mem dividers too. And timings. I'm pulling my hair out.:slobber:
No way man, freeze or reboot is worse than failing prime :)Quote:
Originally Posted by thunderstruck!
I had to burn in all night to get it to fail in prime rather than hard lock.. actually it did lock overnight and while I was at school- but I come home, ran some prime and it fails instead, on both cores no less
It's actually a huge pain in the ass having it lock up, as it's impossible to find a good slightly unstable burn in speed. It's like it passes 16hr prime, 1mhz up and it locks after 5 minutes :confused:
So far I'm very impressed with my CCBBE 0610DPMW. Out of the box, cpu voltage set to auto at 2.8G. Haven't tested further. Crapp air cooling until my radiator gets here. About 3 minutes between ripping open the box and this. I know, I know, I'm stuck with this monitor for now.
http://img312.imageshack.us/img312/3090/14if2.th.jpg
:D
I'm also impressed by the chip, but something is holding me back, I know it. I can pretty much boot and run stuff at 1.4V and less with any speed below 3.0Ghz. But it won't prime. I'm thinking maybe it's my PSU, but I don't know how to verify that. What I do know is that my smart guardian reports that my ATX +5.0V is under 5.0V. I gotta check the others. It's a dual rail rosewill 550W though....Quote:
Originally Posted by thunderstruck!
Only way to check your PSU is with a DMM. I've switched between 2 Ultra-Ds and both give me different bogus readings. Same thing with any voltage your components get. The only way to test them is with a DMM. They are like $30 at Radioshack. Nice and accurate too. On another note, that's a big load for just a 550W PSU. On a second note, are you running your RAM 1:1??
Really? You think there's too much stuff under my hood for my PSU? I guess I'll try to pick up one of those DMM's see what happens.
I run the RAM 1:1 just at 300 HTT or under. It's fine right there(actually fine up to 304HTT, then the headaches begin). I'm gonna try the yellow slots(even though that's pretty much a dead end), try my OCZ 4000, or maybe pop the lid off of her and see if the she just like the cold temps. I do live in Los Angeles, and it's starting to get hot around here. I'm so frustrated though. I feeling like giving up on computers and starting up a gun collection.
Yah rosewill psu aint exactly quality, looks like its the weakest link in your rig.
I wouldnt even bother testing it, just get yourself a quality 500-600 watt psu.
You know this for sure?? I paid like almost 90 dollars for it, and it's kick a$$ cause of it's modular cabling. I haven't seen a soul complain about these yet, and it has a perfect rating on newegg...though newegg isn't a review site, it's nice to see decent feedback.Quote:
Originally Posted by Delirious
Would it be a good test to see how my OCing attempts go if I take everything out 'cept the bare essentials? And still, with my 170 CCBWE 0609, the system ran fine when I fed it 1.5V...I might try to borrow my friends PSU when I get the chance(650W) and see what's up. I can't just go and buy another PSU right now though, I'm strapped on dough...:slapass:
Hmmm i just got an opty 170 CCBWE 0551 off a buddy of mine, i have a MachII any idea what i can get ?
MachII?! give it hell man!! or a frozen over hell!! HaQuote:
Originally Posted by Rubiconx3
So Im working up slowly this CCB1E 0609 I got today, it priming stable at 2.6ghz and 1.31v. What do you guys think?
i have the CCB1E 0609FPAW in my sig so it might be similar. i got 2.7 @ 1.4v and 2.8 @ 1.5v. i can boot and bench 3.0 @ 1.55v, but fails prime instantly. im happy with 2.8 for now, but once i move home the pc will go in the basement so i should see some better temps and hopefully some better OCs. next year IF i go back to school, i will probably be building a custom wc kit so maybe 3.0 is in the cards :)
Just started priming 3G at 1.45v. Gonna leave it over night, but temps are killing it. LDT/Chip voltage doesn't seem to help at all, I was just fine with them at 2.8G and 2.9G w/ defaults.
http://img154.imageshack.us/img154/7051/26vs1.th.jpg
Now that I have gotten my replacement ram in I am stable on my 165 6010 at 3GHz at 1.525v in bios. So far it is ~5hrs prime stable.
Link to prime stable ss
http://filebox.vt.edu/users/gouldmab...e%20stable.JPG
Also cpuz verified
http://valid.x86-secret.com/show_oc.php?id=92228
I am considering burning it in but I use it as my primary pc in college so I have little time to let it sit and burn. Also temps are not a problem because it never goes over 39C even with my o/c x1900xtx at full load with atitool artifact scanner. So ill probably just leave it at 1.525v
Sorry about the noob question, but are you guys getting these from online stores? I´m about to get an opty 165 but I´m not sure which store is selling good steppings.
well, i think the results of the CCBWE 0609FPAW vary much more than the CCB1E 0550VPMW for instance. I've seen 2.9 on WC (1.45v), but my own doesn't even do 2.7 at 1.4v. I'm putting my hopes on the 2 CCBBE 0610DPMW's i'm getting in a short while :-)
default vcore 1.312v@2800 1/1 dvider 280@2.5-3-3-5 1T only 2.5v.. ;) stress Large FFTs.. 5 haurs.. good memory controller 0550 VPMW :D
Quote:
Originally Posted by 865pe
I'm jealous, my 0546XPMW needs 1.5Vcore to do the same :cool:
my 24/7 setting ;)Quote:
Originally Posted by alpha0ne
what is the current stepping/week? in other words, if i were to buy a new opty 170, what would i get?
EDIT: where's the fs/ft section in these forums?
there was a period of time when people were all getting CCB1E/CCBBE (165s), but i doubt they are still shipping them. i think the majority of people are buying them through ebay or FS forums for the good steppings.Quote:
Originally Posted by -mogwai
you need 100 posts to have access to the FS/FT portion of the forums.
anyone with BB's or B1's find it incredibly hard to find your max stable? i see a lot of people with the same issues i have, it will prime fine all day all night, add 1mhz and it failed immediatly. i should be happy running 2700 @ stock vcore but i'm not :(
im gonna try if not ill just sell and try again. Hope i get it high :) but ive heard some 170,s with CCBWE 0551 arent that great. Hopefully phase wakes this thing upQuote:
Originally Posted by Mastactor
if you want good chip find Opty 165 > CCB1E 0608 MPMW--- Opty 170 CCB1E 0550 VPMW ;) 170 0550 VPMW 500$ + ebay :rolleyes: ;)Quote:
Originally Posted by -mogwai
prices aren't that bad. people are finally starting to learn on ebay, nobody is bidding on the CCBWE's and the CCBBE's/CCB1E's are going for around 360-375.
I got it from Monarch last week, it is a CCB1E 0609FPMW.... it was around $275 I think. Dunno what stepping they are shipping now though.Quote:
Originally Posted by npk
Too bad the :censored: shipping for the heatsink is taking forever, and I have yet to test it. :dammit:
im pretty sure you'll like that chip kobalt. i have the same stepping and it does 2.96ghz at 1.4vQuote:
Originally Posted by Kobaltrock
Cant wait for my 165 CCBBE 0610DPMW, should be here yesteraday or today, but lets wait some more time :stick: Hope it will be good overclocker and I will get 2.8Ghz on stock vcore :D
I did that with my CCBBE 0610, I think it scales really well with voltage. So far 2.8 at stock, 2.9 at 1.376v (1.425v in ultra-d, 11/14) and haven't tried 3Ghz, but it looks good for 1.45-1.475v if I keep my temps down. All prime stable too. Currently testing the 2.9 one, been 30 mins.Quote:
Originally Posted by Kashelz
initially took me 1.55 to hit 3.0ghz on my CCBBE. currently working my way up from 2700. i want to wait for my 8pin connector to see if that help any
Lol then i had to had the biggest luck of my life to get a ccb1e 0608mpmw for only 280$.Quote:
Originally Posted by itznfb
http://cgi.ebay.com/AMD-Opteron-165-...QQcmdZViewItem
This is the guy i got my chip from.
865pe
You run your opty at only 2800 for 24/7 ? I run my at 2900 @ 1.4v and works perfectly. Would need more than 1.4v to hit 3ghz, but i would have to make a vcore mod.
thats a killer deal man, you should be happy
Do you know if he´s still selling the same stepping? if so, I´d buy 1 right now.Quote:
Originally Posted by Malkec
Only way to find out is to ask the seller, but he'll probably tell you it's random. I think Malkec just got lucky.
Yup, that´s what I thought, I´ll ask the seller anyway. Thanks for reply ;)
^^ That seller never replied to any of my questions regarding his steppings.
Just testing out my first of my two 0608 MPMW's :)
http://img72.imageshack.us/img72/916...efaultv.th.jpg
It failed at 2817 @ stock after 3 hours. This thing is real hot compared to my :cool: CCBBE. I think I need to upgrade my swirftech water kit.
Devious How did you get two of them?
@ Devious: Same question here, and also If you´re planning to get rid of one of those 0608 MPMW's you know where to send PM ;) let me know if you´re planning to sell it.
Devious your temps look above average (ie better than average, not too high)
stock volts on water isn't it?Quote:
Originally Posted by Repoman
Today got another 0610 -it looks even better :)
http://img268.imageshack.us/img268/1...131v3hx.th.jpg
Soooo lucky! :)
I got them both off ebay in the last couple of weeks. One of them was on buy it now for a few days and no one touched it, I think the buyer put people off saying it needed 1.42v to get to 2.8, and he showed a picture with it at 55Deg, I gambled on him having poor cooling and I think I was right :)
Managed to get a suicide at 3160mhz :woot:
http://valid.x86-secret.com/show_oc?id=92367
Voltage: 1.475x110% = 1.6225v
MemDiv: 140 = 243mhz 2-2-2-5 1T 3.4v
I agree, these chips need a good cooling , they get very hot .
And yes , I ve seen a couple of them on eBay as well.
And I ve seen them available for , I think , 2-3 hours at Flickerdown
:D :D - and then -"stay tuned " - a very nice shop :D
need to run 2 pi'sQuote:
Originally Posted by famich
My CPU seems above average..
http://img278.imageshack.us/img278/3370/38qr.th.jpg
nice clocks in this thread, people are likin the 0610s and 0608s. Weird how we haven't seen anything new for a WHILE, 0608 are like a month old, where's the new stuff! I saw FX60 posted with 0620! I'll bet they keep going with teh bugged memory controllers, which means 3 Ghz for us.
Also if you've got 3 Ghz dual core... put it to use! Run rosetta :D
http://www.xtremesystems.org/forums/...play.php?f=193
Team Xtremesystems needs every helping hand ;)
Also a good burn in tool, i run it 24/7 while burning in processors, won't crash or fail like prime. Also the loaded temps help the paste set.
/shameless promotion
here are the first results from my CCBWE 0609FPAW:
http://img386.imageshack.us/img386/2...145v5cv.th.jpg
Will try to lower volts, heat is killing me.
Question: will this chip run 3Ghz 24/7 under Mach II GT? Is it coldbugged?
i'm also pretty surprised we haven't seen any new steppings since the 0610. we are still seeing 0551's coming out of some shops
i think i got one without a cold bug :D
ccbwe 0602 bpmw
ihs off.
idle at 3.2ghz at -2*c
http://valid.x86-secret.com/show_oc.php?id=92379
Hey quick question, do you guys think an Artic cooler pro 64 will be able to cool an overclocked 165 sufficiently at around say.. 2.8ghz @ 1.45volts(I'm making these numbers up, being hopeful from monarch).
It seems these run pretty hot, and these artic cooler's aren't the best chillers, but think about having the silence under that case! =D
I'm running a CCBWE at 2.8ghz and 1.48v. 24/7 dual prime load temp hits 56°C though.Quote:
Originally Posted by turbox997
I used a Zalman 7000alcu/with DFI RS482 inside an Aspire Q-pack. Opteron 165 ccbwe 0550upmw 1.4vcore 2.6ghzQuote:
Originally Posted by turbox997
http://img84.imageshack.us/img84/343...6526ghz3ek.jpg
I dunno what it is capable of under that type of cooling, but what I do know is that with air cooling, you are pretty much at that core's limit, unless you take off the IHS, but I didn't bother. If you're lucky you'll get to 2.8Ghz.Quote:
Originally Posted by SPivX
Now if you are talking about phase cooling, I would assume 2.9 or 3.0 wouldn't be too much to ask for;)
I need help guys. Tell me something good about this Opty 165 CCB1E 0609FPAW I just got. I can't get it stable at 2.8ghz yet, I'm at 1.52v and it won't prime for nothing. It did 2.6 prime fine with 1.31v, so I don't know what the deal is. I think it might be heat. It idles right now with 1.52v and 2.8ghz @ 40°. Ambient is about 67°F, what is that, about 20°C....
Do I need to keep it cooler?
**Edit: I just noticed its not an "FPAW", Its an FPMW**
Seems that you have hit yourself a nice little wall there...
Heat limited. U can burn it in over night and see. But at that voltage and temp ur done on air.
Think watercoolling will get it higher?Quote:
Originally Posted by situman
so, where do you think i should go to get my 165/170 with good stepping? ebay's typically too expensive, imo.
if i called tankguys/monarch/newegg/etc, would they know what they were selling?
Everyone has been raving about Monarch lately, so I would go with them atm, that is, if you are dead set on buying from an online vendor. You say ebay is too expensive, yet I got my 165 CCBBE 0610DPMV for $310USD...You just gotta be patient and wait for that deal to pop up. Plus, you know for sure what stepping you are getting.Quote:
Originally Posted by -mogwai
Check out this for tankguys to see their latest steppings, and then research 'em. If not tankguys or ebay, your just rolling the dice...
http://www.tankguys.biz/steps.php?os...4656149afa0e32
Tankguys has Retail 165's CCBBE 0615EPMW instock. I received email from them today notifying me he had them. $367+shipping by the way.
Quote:
Originally Posted by Mastactor
good enough for me, =)....until this point, I've been battling with myself between getting a dc opteron or just waiting for conroe...here's the reality of it though.. as much as conroe may be better(if benches hold true), I would probably be spending more on the parts for it, and rumours project that DDRII will go up in price(especially with the patent infringement lawsuit)...so mind as well build another rig, make it DC, call it a day, let things settle after 2 years or so before I get the next gen conroe or "AM3"(whatever's after AM2).
Sorry to get off topic, you guys rock...I've ordered a DC opteron 2 times already, but cancelled the order at the last minute...after my next pay check..I better hold firm.
Do what i'm doing, build the Conroe as a new rig and turn the Opteron into a dedicated cruncher / computer for gaming on the side.
haha, if only I had the funds to play with...or the ebay selling skills. I'd love to do that though. And I can't wait to see conroe overclock results.Quote:
Originally Posted by Absolute_0
wait no longerQuote:
Originally Posted by turbox997
http://www.xtremesystems.org/forums/...ad.php?t=98919
And he's already gone to 3 Ghz on stock volts
Sorry for getting off topic
Back to my 0551, seems I've killed my 0610, but don't know how.
Removed the IHS without problems (it was my 5th one, and have a nice tool that doesn't reach the little chips, can't remember its name), applied AS5, mounted and core1 failed instantly at 2930 where previously it worked fine up to 3000. I thought about bad AS5 apply or unbalanced TT BT, so I reapplied and remounted and suddenly the chip doesn't boot.
It has no broken pins nor cracked core. I accidentally spreaded a bit of AS5 over the little chips, can that be the problem? Of course I cleaned it with Acetone.
BTW, removing the IHS didn't help with temps. And this 0551 is much cooler, like 6-7c, idling at 31-32c where the 0610 idled at 37-38
What can I do? The core and the pins are perfect. I've read with lighter liquid you can cover the whole chip and it works fine, maybe I should try that to be sure there's no AS5? Thanks.
Make sure it's totally clean. Reset the bios. Unplug and replug the PSU. Give everything a "shakedown."
Give it about an hour and try again. I've seen it work! :D
Yes I know positively it will [should] work, but that hour has been three :D
Remounted like 10 times, cleared CMOS each time, ran in safe mode, and more importantly, when I plugged the 0551 without making any of the previous the system booted :(
Anyone can confirm lighter liquid is no harm?, I want to give it a bath to be sure.
was all excited to flash my k8n diamond plus with the new v1.1 bios, and what does it do, drops my fsb limit from 465 to 320!! wtf!? i dont' even have a need to up the vcore at 320fsb. i think i'll reflash back to the beta bios.
Thanks for your help and insite guys.....:rolleyes:Quote:
Originally Posted by Mastactor
i'm sensing some sarcasm there? keep your load temps in the 40s. if you want advice on what your temps should be, make sure you post your load temps.Quote:
Originally Posted by Mastactor
Unless your boards sensor is reporting low then 40C load with 1.52v is great if your using like watercooling or something. I dont see how it could be that cool on aircooling though. On aircooling it should be hitting up around 50C+ at load with that much voltage if your sensors are accurate. Some of the boards like the DFI Expert report up to 8-10C+ low so people that think their load temp is like 39-40C actually have like 50C.Quote:
Originally Posted by Mastactor
Quote:
Originally Posted by ncc-1709
Hmm i have on of those perhaps i should be looking for some cheap mach1 :D
I don't know if the asus boards sensors are off, anyone else know?Quote:
Originally Posted by burningrave101
Ya it idles at 40~42, loads at like 55°C. I have another chip that loads at 58°C (CCBWE 0546MPMW) Its air cooling.
Anyone have comments on the fact that this CCB1E is 0609fpMw, not "FPAW"?
If its a CCB1E, isn't it a good stepping?
Sorry, thought I posted the load with the idle temps, looking back I didn't.Quote:
Originally Posted by itznfb
I can't get an acurate load temp at 2.8ghz, cuz it won't prime for longer than 3 seconds!! But at could be around 55°C