Xtreme Twinmos Memory!

Printable View

Show 100 post(s) from this thread on one page

02-04-2005, 08:16 AM
fareastgq

ok guys, hooked up my booster and an msi neo plat board, tested with 2 dimms 512 at 3.2 volts, managed to hit 253 fsb on both sticks at 2 2 2 10, for some reason I feel the board is limiting any more, it didn't read 3.3 and up volts :/ , didn't have time to memtest but I did run a few loops of 3dmark and for those few loops, it ran all the way through. I'll update when I can get a good memtest in. I hate the neo plat board btw. freaking xp-90+ dimms + booster in 4th slot is tight fit,
02-04-2005, 08:30 AM
trans am

Quote:

Originally Posted by fareastgq

ok guys, hooked up my booster and an msi neo plat board, tested with 2 dimms 512 at 3.2 volts, managed to hit 253 fsb on both sticks at 2 2 2 10, for some reason I feel the board is limiting any more, it didn't read 3.3 and up volts :/ , didn't have time to memtest but I did run a few loops of 3dmark and for those few loops, it ran all the way through. I'll update when I can get a good memtest in. I hate the neo plat board btw. freaking xp-90+ dimms + booster in 4th slot is tight fit,

story of my life with the neo2 and booster woes. We need some ram that has a booster built right into the PCB. You plug a molex right into the top of the ram stick and bam! I will be demonstarting this new ram with the integrated booster on the 2005 XS tour! Call Ticketmaster before the tickets to this amazing event are sold out!
02-04-2005, 09:28 AM
LilGator

gah, I keep missing these :D
02-04-2005, 11:32 AM
wez

Quote:

Originally Posted by godsa

WEZ
I see it but...where do you buy them?

Like i said before, jimmspc-store.fi ;)
02-04-2005, 01:25 PM
steve-0

hi

do you know something about the V-Data? it's said that they have the same chips

http://usuarios.lycos.es/jopemerindo/DSCN2325.JPG

and there are very cheap (1GB = 130€ ~ 170$ )
do you think that the v-data can do something simmilar to the UTT?

regards,
02-04-2005, 01:59 PM
wez

Quote:

Originally Posted by steve-0

hi

do you know something about the V-Data? it's said that they have the same chips

http://usuarios.lycos.es/jopemerindo/DSCN2325.JPG

and there are very cheap (1GB = 130€ ~ 170$ )
do you think that the v-data can do something simmilar to the UTT?

regards,

well, here is my V-data PC3200 (UTT) :)

V-Data
40503
VDD8608A8A-5B

Totaly stable:
http://xs.to/xs.php?h=xs14&d=05054&f..._3.36v_nr2.bmp

Another one but it isnt 100% stable yet.
http://xs.to/xs.php?h=xs14&d=05054&f...2_1T_3.56v.bmp
02-04-2005, 02:07 PM
bwan

1 Attachment(s)

Hipro5 ~ I have the same board as yours. What is your GAT setting? My TMSP are 2 X 512MB AA4T/44D/0503. I can only managed 2-5-2-2 CPC off/PAT disabled at 255 FSB @ 3.6v but not fully stable/memtest error. Pumping more juice up to 4.0v also doesn't help. Is it my board as my 2 X 256 BH-6 and 2 X 256MB BH-5 (both pair KVR) also stuck at the same FSB. TIA.
02-04-2005, 02:45 PM
steve-0

Quote:

Originally Posted by wez

well, here is my V-data PC3200 (UTT) :)

V-Data
40503
VDD8608A8A-5B

Totaly stable:
http://xs.to/xs.php?h=xs14&d=05054&f..._3.36v_nr2.bmp

Another one but it isnt 100% stable yet.
http://xs.to/xs.php?h=xs14&d=05054&f...2_1T_3.56v.bmp

wow, i didn't expect that nice results! is that screen at 2601T at 3.36v? :eek:
02-04-2005, 02:47 PM
wez

Quote:

Originally Posted by steve-0

wow, i didn't expect that nice results! is that screen at 2601T at 3.36v? :eek:

Oh yes it is :toast:
02-04-2005, 02:53 PM
steve-0

Quote:

Originally Posted by wez

Oh yes it is :toast:

nice... i hope to have simmilar results

regards,
02-04-2005, 02:57 PM
hipro5

Quote:

Originally Posted by bwan

Hipro5 ~ I have the same board as yours. What is your GAT setting? My TMSP are 2 X 512MB AA4T/44D/0503. I can only managed 2-5-2-2 CPC off/PAT disabled at 255 FSB @ 3.6v but not fully stable/memtest error. Pumping more juice up to 4.0v also doesn't help. Is it my board as my 2 X 256 BH-6 and 2 X 256MB BH-5 (both pair KVR) also stuck at the same FSB. TIA.

Yes it is you board ONLY IF you haven't mod it yet......... ;)

Upping the VAGP at 1.95Volts and Vchip at 1.52Volts I think that you could do about 263 - 268MHz..... ;)

.......and yes......with 2 x 512MB you MUST have PAT = Disable and CPC = Disable as well........Also try : 2 - 5 - 2 - 2 , 32min , 64MB , Auto , Normal , 4 (or 5) and NOT Auto , Enable(or Disable) and Disable.....Make sure to have your AGP/PCI lock at 75/37 or 76/38 and PCI Latency = 64.......
02-04-2005, 02:58 PM
hipro5

Quote:

Originally Posted by esdee

are these vagouridis DIMMs hipro5?

Yes...... :)
02-04-2005, 04:43 PM
situman

anyway to disable pat on IC7?
02-04-2005, 05:56 PM
undeadlord

everyone, is this "the one" (BH UTT that is)?
0448d
tmb7608f8e50I

white sticker
sn448w45m41074822
pnm2g9j16a8att9f081cadt
model m2g9j16a-tt

A guy is trying to sell me these TWinmos 2x512MB, wonder if it's the right BH UTT one? Thank you.

Just check back the thread, this is very unlikely to be BH UTT chip. But I'm still waiting for some xpert input. For now let me have some hope (although it might be shattered pretty soon :( .
02-04-2005, 06:25 PM
roscoe211

No, the CADT at the end of the p/n should be AA4T
02-04-2005, 06:28 PM
undeadlord

thx a lot, guess have to turn this deal down (he's selling it for like $120), too bad.
02-04-2005, 07:27 PM
tictac

Quote:

Originally Posted by undeadlord

everyone, is this "the one" (BH UTT that is)?
0448d
tmb7608f8e50I

white sticker
sn448w45m41074822
pnm2g9j16a8att9f081cadt
model m2g9j16a-tt

A guy is trying to sell me these TWinmos 2x512MB, wonder if it's the right BH UTT one? Thank you.

Just check back the thread, this is very unlikely to be BH UTT chip. But I'm still waiting for some xpert input. For now let me have some hope (although it might be shattered pretty soon :( .

PN:m2g9j16a8att9f081cadt

CA = 1,1u
DT = PSC chip

it is not Winbond UTT :slap:
02-04-2005, 09:08 PM
bwan

Quote:

Originally Posted by hipro5

Yes it is you board ONLY IF you haven't mod it yet......... ;)

Upping the VAGP at 1.95Volts and Vchip at 1.52Volts I think that you could do about 263 - 268MHz..... ;)

.......and yes......with 2 x 512MB you MUST have PAT = Disable and CPC = Disable as well........Also try : 2 - 5 - 2 - 2 , 32min , 64MB , Auto , Normal , 4 (or 5) and NOT Auto , Enable(or Disable) and Disable.....Make sure to have your AGP/PCI lock at 75/37 or 76/38 and PCI Latency = 64.......

Thanks. I'll do the mod first and post a result later.
02-04-2005, 09:51 PM
undeadlord

Quote:

Originally Posted by tictac

PN:m2g9j16a8att9f081cadt

CA = 1,1u
DT = PSC chip

it is not Winbond UTT :slap:

Ouch...
02-05-2005, 04:42 AM
bwan

2 Attachment(s)

I guess this is why peoples love Hipro5 so much. :toast:
1.56 vchip, 1.95v vagp as suggested by him. 260 FSB but I am not finished yet. The VGA card at stock coremem.
02-05-2005, 04:49 AM
TEDY

bwan which memory ? your sig tells BH-6 and thread is about TWINMOS.
02-05-2005, 04:54 AM
bwan

Quote:

Originally Posted by TEDY

bwan which memory ? your sig tells BH-6 and thread is about TWINMOS.

sorry that was my old rig. This is 2 X 512MB TMSP. Same week as yours. 0503/AA4T/44D M.Tec
02-05-2005, 05:22 AM
cantankerous

Are you saying putting 1.95 on your agp card helps overclocks? Why is this? And is 1.9 just a bit much? Will it break your card? Does this work on all motherboards? I have a DFI NF2 board and am wondering if raising my agp above 1.6 will net me any results.
02-05-2005, 06:18 AM
bwan

Quote:

Originally Posted by cantankerous

Are you saying putting 1.95 on your agp card helps overclocks? Why is this? And is 1.9 just a bit much? Will it break your card? Does this work on all motherboards? I have a DFI NF2 board and am wondering if raising my agp above 1.6 will net me any results.

Raising VAGP nothing to do with a VGA card. You have to vmod your VGPU on your card to help overclocking your VGA. Raising the VAGP basically will add more juice to AGP slot and it's helping to gain more FSB and stabilize it as I have to raise my AGP/PCI as well. Correct me if I'm wrong. Need Hipro5 to verify this.
02-05-2005, 06:24 AM
TEDY

bwan you're getting 260 on MTEC ? wow

what vdimm ?

Show 100 post(s) from this thread on one page