Retail Q9650 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

06-05-2009, 04:24 AM
andressergio

Quote:

Originally Posted by ViViD

Sorry Have'nt Found Any Thread About My Quad :)
But Look Like Q9650

But Many Times Can't Stable On 500FSB I Played With CPU Clock Skew & GTL's But Not Diffrent
Can U Gays Help Me For Stable In 500FSB?
Sorry For My Bad English

Nice score mate :up:

Cheers
Sergio
06-05-2009, 08:02 AM
Hoss331

Quote:

Originally Posted by ViViD

Sorry Have'nt Found Any Thread About My Quad :)

Here you go :up:

http://www.xtremesystems.org/forums/...=203236&page=7
06-05-2009, 11:31 AM
ViViD

Tanx M8 For Guide Me
And Tanx For See My Resualt
06-05-2009, 10:30 PM
thebluemeanie1

Nice scores Sergio and ViViD but I can't let you two have all the fun.:)
http://i306.photobucket.com/albums/n.../th_fastpi.jpg
The GPU just didn't want to clock like it usually does but anyway. http://service.futuremark.com/compare?3dm06=11128533 (only did 830/2050/2500 instead of the usual 850/2100/2500:shrug:)
06-06-2009, 02:55 AM
Chrono Detector

http://img512.imageshack.us/img512/3874/desktopl.th.jpg

My successful overclock on air with a Zalman 9700NT. My idle temps are around 34 and my full load temps is about 60.
06-06-2009, 05:56 AM
andressergio

Quote:

Originally Posted by thebluemeanie1

Nice scores Sergio and ViViD but I can't let you two have all the fun.:)
http://i306.photobucket.com/albums/n.../th_fastpi.jpg
The GPU just didn't want to clock like it usually does but anyway. http://service.futuremark.com/compare?3dm06=11128533 (only did 830/2050/2500 instead of the usual 850/2100/2500:shrug:)

jajaja i don't wanna give tha vcore to mine that's why i limit myself to 1,4vcore...maybe someday :D

congrats mate that's a nice number :up:

cheers
Sergio
06-06-2009, 11:30 AM
Sem

thinking of getting a q9650 and hoping for 4ghz
are the recent batches/weeks overclocking ok

Thanks
06-06-2009, 11:44 AM
radaja

im pretty sure they will all do 4.0Ghz
i can safely guarantee 4.0Ghz and higher with the UD3P/UD3R boards
06-06-2009, 01:05 PM
ViViD

Quote:

Originally Posted by thebluemeanie1

Nice scores Sergio and ViViD but I can't let you two have all the fun.:)
http://i306.photobucket.com/albums/n.../th_fastpi.jpg
The GPU just didn't want to clock like it usually does but anyway. http://service.futuremark.com/compare?3dm06=11128533 (only did 830/2050/2500 instead of the usual 850/2100/2500:shrug:)

:clap::clap::clap: Nice Resualt M8
Nice Chip What Use Cooler? LN2?:confused:
I Thinck My Quad On Bad Batch Number I Use Over 1.40 V For VCore
06-06-2009, 02:13 PM
radaja

Quote:

Originally Posted by thebluemeanie1

Nice scores Sergio and ViViD but I can't let you two have all the fun.:)
http://i306.photobucket.com/albums/n.../th_fastpi.jpg
The GPU just didn't want to clock like it usually does but anyway. http://service.futuremark.com/compare?3dm06=11128533 (only did 830/2050/2500 instead of the usual 850/2100/2500:shrug:)

thebluemeanie1,sorry i did not even see this.awesome clocks:up:
06-06-2009, 09:29 PM
thebluemeanie1

Quote:

Originally Posted by andressergio

jajaja i don't wanna give tha vcore to mine that's why i limit myself to 1,4vcore...maybe someday :D

congrats mate that's a nice number :up:

cheers
Sergio

Thanks. :) From the looks of what is in your signature you wouldn't have any cooling problems with more volts.:up:

Quote:

Originally Posted by ViViD

:clap::clap::clap: Nice Resualt M8
Nice Chip What Use Cooler? LN2?:confused:
I Thinck My Quad On Bad Batch Number I Use Over 1.40 V For VCore

Thank you.:) The cooling is a custom watercooling system with a 240MM radiator. After 15-20 minutes of benching the liquid temperature gets high enough that it takes about a half hour of rest before it will run with any kind of stability. :rofl:

Quote:

Originally Posted by radaja

thebluemeanie1,sorry i did not even see this.awesome clocks:up:

Thanks man. I learned a lot from your various posts in this section.:up:
06-07-2009, 01:24 AM
CryptiK

Quote:

Originally Posted by xzulu

@CryptiK

Hey dude! Hows it going? When do you plan to move to the Gigabyte UD3P? I see you're still on the M2F.

Not sure if I will at this stage.
06-09-2009, 06:39 PM
Sem

seem to be having problems getting my Q9650 prime stable
it passes linpack at 4.05Ghz 450x9 @ 1.28 vcore

but core 2 fails prime within 2 minutes and ive tried going all the way up to 1.35v

NB and VTT at 1.36v
using a maximus ii formula
anyone got any suggestions?

thanks
06-09-2009, 09:42 PM
Jor3lBR

Quote:

Originally Posted by thebluemeanie1

http://i306.photobucket.com/albums/n...anie1/PIWR.jpg
Lots of fun to overclock these CPUs.:up:

Too bad that Jor3lBRs run is marked invalid, I need a new goal now.:(

http://www.hwbot.org/result.do?resultId=843116

Had my Q9650 disabled for a long time now.

I will hook it up tomorrow to get the 9.3 Super Pi back so you have some seconds to live for :up:. I didn't save the entire pi run because it was a lousy run and never thought it would beet the World Record.

And XS erased my post of last stable OC (IBT and Prime95) 4700Mhz 1.39-1.40vcore. Too bad had some good pointers there.
06-10-2009, 03:19 AM
andressergio

Quote:

Originally Posted by Jor3lBR

Had my Q9650 disabled for a long time now.

I will hook it up tomorrow to get the 9.3 Super Pi back so you have some seconds to live for :up:. I didn't save the entire pi run because it was a lousy run and never thought it would beet the World Record.

And XS erased my post of last stable OC (IBT and Prime95) 4700Mhz 1.39-1.40vcore. Too bad had some good pointers there.

Wellcome back mate :up::up::up:

Cheers
Sergio
06-10-2009, 12:04 PM
Jor3lBR

Super Pi WR 9.319s

Here, no tweaks, this is on regular Win 7 OS that I used daily (no wazaa, fresh install etc etc).

http://i42.tinypic.com/286v3f6.jpg
06-10-2009, 01:27 PM
andressergio

Quote:

Originally Posted by Jor3lBR

Here, no tweaks, this is on regular Win 7 OS that I used daily (no wazaa, fresh install etc etc).

http://i42.tinypic.com/286v3f6.jpg

awesome mate !!!
06-10-2009, 07:37 PM
thebluemeanie1

Quote:

Originally Posted by Jor3lBR

Here, no tweaks, this is on regular Win 7 OS that I used daily (no wazaa, fresh install etc etc).

Thanks, catching that is going to quite the challenge.:up:

I used the same clockspeed on a cut down XP and you still killed my time.:rofl:
http://i306.photobucket.com/albums/n..._untitled1.jpg
How to get this to run at 5GHz..Hmm...
06-12-2009, 03:59 PM
darkgregor

Quote:

Originally Posted by thebluemeanie1

Thanks, catching that is going to quite the challenge.:up:

I used the same clockspeed on a cut down XP and you still killed my time.:rofl:
http://i306.photobucket.com/albums/n..._untitled1.jpg
How to get this to run at 5GHz..Hmm...

and your current BIOS settings are ?:up:
06-12-2009, 06:16 PM
thebluemeanie1

Code:

Robust Graphics Booster - FAST CPU Clock Ratio - 6X CPU Host Frequency - 545 or 556 PCI Express Frquency - 103 C.I.A.2 - Disabled CPU Clock Drive - 1000mV PCI Express Clock Drive 1000mV Clock skews are all set to 0PS. ****DRAM Performance Control**** Performance Enhance - Standard Extreme Memory Profile - Disabled (G) MCH Frequency Latch - 400MHz System Memory Multiplier - 2.00 DRAM Timing Selectable - Manual >>>Sandard Timing Control<<< CAS Latency Time - 5 tRCD - 5 tRP - 4 tRAS - 15 >>>Advanced Timing Control<<< tRRD - 15 tWTR - 15 tWR - 31 tRFC - 255:eek: tRTP - 15 Command Rate - 3 >>>>Channel A Timing Settings Static tRead Value - 15 Everything else is Auto. >>>>Channel A Driving Settings Driving Strength Profile - OC-1200 Everything else is Auto. >>>>Channel B Timing Settings Same as Chanel A. >>>>Channel B Driving Settings Same as Channel A. ****Motherboard Voltage Control**** >>>>CPU Load Line Calibration - Enabled CPU Vcore - 1.60000V CPU Termination - 1.660V CPU PLL - 1.810V CPU Reference - 1.036V >>>>MCH/ICH MCH Core - 1.660V MCH Reference - 1.051V MCH/DRAM Refence - 0.920 ICH I/O - 1.750V ICH Core - 1.300V >>>DRAM DRAM Voltage - 2.100V DRAM Termination - 1.050V Channel A Reference - 1.050V Channel B Reference - 1.050V CPU Features are all Disabled.

The laughable advanced memory timings are the difference between a very stable 4.85Ghz and a rather unstable 4.9Ghz. For 4.85Ghz i could use Performance Level 11 and much tighter timings all around.:up:
06-13-2009, 11:29 AM
andressergio

well just an update of my SPI 1M :) just for fun

http://img132.imageshack.us/img132/9228/spi12.jpg

cheers :up:
Sergio
06-13-2009, 11:36 AM
WaterFlex

Holy crap! Sick FSB for quads! Well done, mates !
06-14-2009, 03:35 PM
Jor3lBR

Q9650:Consolidating HWbot HOF

Hey guys,

Inspired by thebluemeanie1 I decided to go for the 7 Gold Cups available for Q9650 hardware: CPU-Z, PiFast, SuperPi, SuperPi32m, wPrime32m, wPrime1024m and PCMark05. I got 6 out of 7 so I think it's an interesting read for Q9650 owners:

Q9650 - 6 Gold Cups in one Day (conquering the HWBot HOF)
06-14-2009, 06:34 PM
thebluemeanie1

Quote:

Originally Posted by Jor3lBR

Hey guys,

Inspired by thebluemeanie1 I decided to go for the 7 Gold Cups available for Q9650 hardware: CPU-Z, PiFast, SuperPi, SuperPi32m, wPrime32m, wPrime1024m and PCMark05. I got 6 out of 7 so I think it's an interesting read for Q9650 owners:

Q9650 - 6 Gold Cups in one Day (conquering the HWBot HOF)

Very very impressive times with clock speeds to match. The CPUz, SuperPi 1M, 32M and PiFast are completely untouchable.:shocked:(By me anyways)
Does going colder help with the FSB speed?

Once I saw your post I got right to reinstalling windows and running wPrime.;)

http://i306.photobucket.com/albums/n...prime1024M.jpg
06-14-2009, 06:43 PM
Jor3lBR

Quote:

Originally Posted by thebluemeanie1

Very very impressive times with clock speeds to match. The CPUz, SuperPi 1M, 32M and PiFast are completely untouchable.:shocked:(By me anyways)
Does going colder help with the FSB speed?

Once I saw your post I got right to reinstalling windows and running wPrime.;)

http://i306.photobucket.com/albums/n...prime1024M.jpg

Hey Bluemeanie I see you have some backups :up:

Well yeah those are still on the works I don't know what should I do to optimize wPrime, it's a new engine to me, I dunno how come my scores with hiegher ram speeds are lower, obviously I'm doing something wrong. I probably can get lower scores on Vista I only tried on Xp and W7 I would hate to format my PC right now...

The temps always helps but my SuperPi scores I did with water. wPrime1024m is a real cooling system test after it passes 80%!

Show 100 post(s) from this thread on one page