Printable View
This appears to work with Forceware 177.XX drivers and up only I believe. Provided you have those initial drivers installed, after you install the newest PhysX driver v08.07.18 (Link to download driver) go to the Start menu, open the "Nvidia Corporation" folder and you should see "NVIDIA PhysX Properties" there. Click on it and check the Settings tab. Should look something like this:Quote:
Originally Posted by Trigger5521
Cheers thx!Quote:
Originally Posted by TheRoyalty
I reinstalled vista, fresh driver ect... I ran 3dmark06 everything seemed ok, after the benchmark completed my screen started flashing, it goes from normal desktop to all black, and blinks kind of randomly. Is it possible to ruin a card from pushing the clocks up too high too often?
Interesting...
Question / Issue
I have random black screen or blinking when connecting to a DVI LCD monitor.
Answer / Solution
This may be due to a timing issue. One thing to try is to go in to the NVIDIA control panel under display select “manage custom timings” and you want to click on create, and then select advanced down at the bottom right hand side, and there are options for the “timing standard” select “CVT Reduced Blank” click test and then click ok.
Thank you EVGA forums.... I think that fixed the problem. I wonder why I never ran into this before today.
On Vista X64 the PhysX panel is in the 32 bit control panel!Quote:
Originally Posted by Trigger5521
Otis, I can only get it to 3.0ghz.Quote:
Originally Posted by otisthecat
I've not seen anyone get the Q6600 higher on this board. But I could be wrong.
Erik
http://i156.photobucket.com/albums/t...k/Image2-2.jpgQuote:
Originally Posted by TheRoyalty
orb misread my cpu clock...
It assumed I was at full (9.5) multi. actual was 9.0
It looks like my video card did go south. Now I have green dots all over thescreen and this forum has purple lines everywhere. Time to RMA to evga :(
Edit:
Picked up a new 9800GTX and a Corsair 1000Watt power supply... this will make me feel better. once the RMA comes back its SLI time.
Sorry to hear your card went south, would be nicer if you could use the step-up program and get a 280. :)
Is everybody free of corruption on this board now?
The dust seems to have settled since BIOS 901 I think, so far everything has been stable 24\7 for a few weeks now. Finally get to really enjoy this board the way we were meant to. :up:Quote:
Originally Posted by M@G!C
No corruption for me. Only issues I have are some slight crackling audio when using latest video drivers (174.74 fixes this) but I want to use physX in the latest driver set.Quote:
Originally Posted by M@G!C
Also I get weird network teaming driver and sleep issues, almost have this sorted I think.
1702 linked and synced @ 7-7-7-22 is my max stable but I'm pretty happy with that considering I'm running 2x2GB of ram. Overall I have to say I'm quite happy with this board, if you want SLI it's the way to go IMO.
No corruption here either. Everything is nice n smooth
Hey guys i need a little bit of your world famous experience. I seem to be geting BSOD's everytime i start up. It will only happen once, and then i can use the PC as normal. I get no freezing during games or videos and the system really works well. This only started happening recently, but i havent changed any settings in my bios. Has anyone else had similar problems and what did you do to fix it?
What RAM are you running? Sometimes the bios has very low ram voltages depending on what your sticks are rated for.
Sorry i forgot to leave my specs,
Q9550 @ 3.82 Ghz Bios 901
OCZ Platinum 1440 8-8-8-20 1T
Evga 9800 GX2
The OCZ Platinum 14400 didn't work well for me. But isn't it 8-8-8-24/28 what their rated at? at 1.90v?Quote:
Originally Posted by RasCas
yer, but i managed to get it to 8-8-8-20 and it passed memtest for windows and I have it at 1.90V in bios.
Wow, that's impressive with a wolfie. This is what I get with my yorkie.Quote:
Originally Posted by nuclearjock
Vista Ultimate x64
175.19 WHQL
3dmark06(default gfx 576/1350/900, qx9650 @ 4ghz)
19438
Vantage(default gfx 576/1350/900, qx9650 @ 4ghz)
P12108
3dmark06(OC gfx 631/1478/998, qx9650 @ 4ghz)
19925
Vantage(OC gfx 631/1478/998, qx9650 @ 4ghz)
P12831
177.79 with 08.07.18 Physx
3dmark06(default gfx 576/1350/900, qx9650 @ 4ghz)
19270
Vantage(default gfx 576/1350/900, qx9650 @ 4ghz)
P13766
3dmark06(OC gfx 631/1478/998, qx9650 @ 4ghz)
19789
Vantage(OC gfx 631/1478/998, qx9650 @ 4ghz)
P15047
It looks like the new drivers loose some in 3dmark06 but gain a lot with vantage(mostly because of the Physx support). I think 200 points is just too much to be considrered within the margin for error of multiple 3dmark runs. I hope this improves with the actual WHQL drivers as not all games have Physx support.
Oh yeah, I just watched Micheal Phelps win the gold medal in the 400M IM.
GO PHELPS!!!!!!
finally 1002 works for me...dont know the prob but i reinstalled vista and installed 177.79+15.17.
on the other hand i gonna get rid of this board as soon as i get two 4870x2, alrdy have a rampage extreme.
s2e just a failure ~.~
Not sure if I would say it's a failure but I won't argue it was a bumpy ride to get this engine to run smoothly. Now that it is, I can say I'm actually having fun with this board these days. Just needed a good BIOS and lots of patience. All those hours of tweakage were definitely rewarded. Happy camper over here.Quote:
Originally Posted by sargatanas
Cheers:up::up::D
well i have to correct myself...freezing is back with 1002.
don't know the deal...0804 is stable but it seems there is some corruption.
maybe the difference between the 2 is the vnb. 1,44v nb works fine with 2x gx2, 4x1333mhz corsairs and 0804 but the same setting freezes now again with the 1002.
do u thing i should increase the vnb? the rest is @ stock setting
20555 Stock clocks on my 9800 GTX's in SLI. I think I can get a lot more out of her once I start OC'ing the cards.
http://img244.imageshack.us/img244/3...6sliit8.th.jpg
Vantage 13449 Stock clocks again Physx enabled
http://img359.imageshack.us/img359/4...sxonfq4.th.jpg
Wow.., The 177.79 Drivers are really scaling well when I bump my Core clocks up. This board and these video cards are really starting to fly now. This is getting fun!
:woot::woot: Finally i found stability with this board!!! :yepp:
Running my 4GB CSX Diablo DDR3 at 1800FSB 8-8-8-19 linked and sinked P1 and P2 enable!!! My QX9650 is running at 3825 Mhz with only 1,3250v Vcore set on BIOS... not bad i think...
Memtest stable and Prime stable for 5 hours :rocker::rocker:
Also runned 3 loops of 3Dmark 2006 and played Crysis for 1 hour and.... ROCK STABLE! :wiggle::wiggle:
Will post some Everest bandwidth tests later... ( still priming as i post this) ... :D
I really tried tight timimgs 8-7-6 and 8-7-7 but gave me errors in Memtest and Prime 95 but i have not give up...:up:
http://img208.imageshack.us/img208/8769/32415446uq2.jpgD
Thats a nice 1:2 overclock. Cant wait to see the everest benchmark. Btw, 1.25vcore for 450Mhz FSB @ 3.8Ghz? I think thats really good, is LLC enabled by any chance?Quote:
Originally Posted by M@G!C
Mind posting your voltages? :D
I would say that you probably need more NB voltage since this are known to do 8-8-8-x on 2000Mhz as posted on CSX (Maybe with a dual-core), are you on water? Cause I would try more NB voltage for sure ;)
Also, posting NB temps would be great :D
Thanks Slim! :up:Quote:
Originally Posted by slim142
..I´ve made a mistake Vcore isn´t 1,2500v but 1,3250v!!
Im on air at the moment... never donne watercooling but i´m really tempted... my NB temperature is 50º under load.
Here is my voltages:
Vcore 1,3250V
LCC ENABLED
PLL 1,50V
VTT 1,30
Vdimm 1,86V
NB 1,48V
SB 1,55V
CPU GTL REF0 -29Mv
CPU GTL REF1 -32Mv
CPU GTL REF2 -32Mv
CPU GTL REF3 -29Mv
NB GTL REF +20Mv