Printable View
What is the best bios for this board with a e6400 and 2x2gb ram? I had 0809 and it didn't work that great, and I just flashed it to 0311 bios but the trfc is limited to 42, so what bios should i try?
edit: nvm, just leave it on auto and the spd sets it
http://img296.imageshack.us/img296/7105/ramxk3.png
So what's the verdict on 0812? Is it bunk? I see that it dropped a few bench points on those tests, but does it accomplish anything? even if "only" stability?
My P5K Deluxe is being a pansy and not wanting to boot with 4 sticks of RAM all the sudden...
hi sorry for little off topic,i got few problems with this board i think!
yesterday i just wanted to upgrade the bios through DOS.i put win98 cd in
dvd drive to boot in DOS."start with cd rom support" but it seys the no cd
drive found.but in EZ flash program the dvd drive is mention with drive letter.other problem in windows the AI suite v1.02,02 is not working.neather clock gen showing the memery frquencies, HWmonitor also not showing the DDR volts,even when i set manually 2.00v or 1.95V.but cpuz is showing memery
frequency and timing.i dont know what is going on...........
E6850
Team xtreem pc6400 4.4.4.10
p5k deluxe wi/fi bios 0812
gainward 8800gts
TT 750W
please can somebody check on there p5k dlx are these softwere are working.
0812 works fine here with Qx9650 and E8400 with 2 x 2 Gb sticks... I've heard comments that it doesn't seem to work good with 4 sticks... but I'm prolly repeating myself here lol
not a problem at all, much more stable than 705 at least for me.Quote:
Originally Posted by jeeka
http://img209.imageshack.us/img209/9...bujomr0.th.jpg
are these softwere working? with pk5??????????????
Running Bios v0812, and everytime i shut down for a min or 2, it tells me Overclocking failed even at stock settings with minute changes, could someone tell me what i need to do ?
E6750 (liquid cooled)
8800gt
ReaperX PC8000 2x2gb (black slots) set at 2.2 volts.
620HX
Samsung t1 f1
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control:Auto
FSB Frequency: Auto
PCI-E Frequency: 100
Dram Command Rate [N2]
DRAM Frequency: Auto
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 18
TWR: Auto
TRFC: Auto
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Disabled
Transaction Booster: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: [1.4000v]
CPU Voltage Reference: Auto
CPU Voltage Damper: Auto
CPU PLL Voltage: Auto
DRAM Voltage: 2.20
FSB Termination Voltage: Auto
North Bridge Voltage: Auto
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
clock Over charging voltage: Auto
Load Line Calibration [Enabled]
Advance CPU Settings
CPU Ratio Control:Auto
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Update: it seems like i had to set the CPU Ratio Control manually, "CPU multi" which i my case would be "8".
Try these settings plz, first try with 7 multi then test thoroughly, if all is well go to 8X you get 3.2Ghz (maybe you need to up the Vcore) and get decent speed out of ya ramsQuote:
Originally Posted by rip[tor
Please need some incite
http://i305.photobucket.com/albums/n...n/settings.jpg
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 7
FSB Frequency: 500
PCI-E Frequency: 100
DRAM Frequency: 1003
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 18
TWR: Auto
TRFC: 55
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Auto
Transaction Booster: Auto
CPU Voltage: 1.4750
CPU PLL Voltage: 1.50
FSB Termination Voltage: 1.40
DRAM Voltage: 2.10v
North Bridge Voltage: 1.40
South Bridge Voltage: 1.20
Clock Over-Charging Mode: Auto
Load Line Calibration: Enabled
CPU Voltage Reference: x6.3
North Bridge Voltage Reference: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 7
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
USB Configuration
USB Functions: Enabled
Legacy USB Support: Disabled
Only thing I would do is TRFC to 55 and disable transaction booster (relax level 1), for the rest looking sweet, just ya mobo temps are getting way up there... cool those mosfets too !!... I would run that rig at 9 multi with 400FSB 24/7 just to be safer on the mobo side... you still fighting those overclock failed messages dude ?
Yes, thats why i want to see if it will act up when in 1:1...it doesn't seem to at the moment. will shut down for a while then see if i get a random No post, or random OC Failed message again.Quote:
Originally Posted by Leeghoofd
And i was wondering since its 4gb of ram in vista 32bit, what do i use to fully test all 4gb, cause in Prime95 i'm only about 2.3gb testing, should i set some settings in Prime95....or it doesnt matter.
P.S. just set transaction booster to disable relax[1], the performance level in memset has gone up from 12-13.
What's up guys!!
I'm thinking to buy this mobo, but i see some options on the bios, and i don't understood..
what is DRAM Static Read Control??
Transaction Booster
Clock Over-Charging Mode
CPU Voltage Reference
CPU PLL Voltage
Sorry for the noob,i am beginner in overclock...i started this experience in this year, and i'm trying to learn something a little professional overclock
Thanks guys :D
Nobody?? :(
I just updated to the 0812 bios however, my settings seem incorrect. CPUZ shows that my CPU (E6600 on P5k DLX) is running at 1603 MHZ. For now I want to get it to be stable at STOCK speeds, and I will worry about overlocks later. Can you provide BIOS settings for complete optimal stock operation? My ram is 4-4-4-12 Corsair XMS PC6400. Thanks!
It is a good mobo. I still have it in service as a 2bd PC and it did great w/ a new E6750 last July, taking it to 4GHz on air. Those settings ar for more advance overclocking outside of jusr rising FSB and vcore.Quote:
Originally Posted by R@ptor =]]
This is normal if EIST or C1E+TM/2 is enabled.Quote:
Originally Posted by mistryv
So if i set this options to auto, i won't have problems with stability of system?Quote:
Originally Posted by Nuckin_Futs
if i bought this mobo, i will set 450fsb max...I will have to change the mch voltage, or i will have to change something in this options?
thanks
450 is on the upper end for an E6600 so auto may not be enough. Although, like I said, auto can go way over too, making it get too hot. You can record the values and adjust it a tad from there as needed. Many of us here will help guide you there if this is a 1st run.Quote:
Originally Posted by R@ptor =]]
hi
i dont no any body understood this,i actuly flush bios 0603 to 0812 and now A1 suite v1.02.02 not
working any more,it shows this "softwere counter a broblem and need to close down"but with 0603 it was perfect working.i know that other softwere might have problem reading the volts and frequencies
but this one is official asus softwere???????
any body have this problem please help.
Try uninstalling and reinstalling any apps that give you problems. Often many apps especially that one since it is BIOS based so much must be reinstalled to configure with new BIOS version. Sometimes we even reinstall fresh XP or OS to get it all right, or at least important chipset, VGA, and RAID drivers.Quote:
Originally Posted by xpower
But my cpu it's a E6750, and i see a lot of people making this cpu run at 3.8ghz on air in a giga p35 ds3 easily..so this week i'm going to buy this mobo...Quote:
Originally Posted by Nuckin_Futs
Someone could talk if I am doing the right thing, Buying this mobo?? new mobos it's very interessant but the max i can pay it's R$600,00 and this new mobos it's more expensives
Here in brasil, the stores have a p5k premium, the deluxe it's a rare mobo..
i'm thinking to buy p5k premium...But these options worry me..when i gonna do overclock with the new mobo, I'll need help...come on guys :D
Here is my latest setup for everyday use. I had this system up to 4.7 GHz @ 1.55v with acceptable temps with air cooling, but the voltage is too high. It runs stable at 4.0 GHz @ 1.32v, but runs 5C cooler under load at 3924 MHz @ 1.27v...and this system usually runs 24 hrs a day.
--------------------------------
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Auto
- Ratio CMOS Setting: 9
FSB Frequency: 436
Bootstrap Setting: 333 MHz
PCI-E Frequency: Auto
DRAM Frequency: Auto (436)
DRAM Timing Control: Manual
CAS# Latency: 4
RAS# to CAS# Delay: 4
RAS# Precharge: 4
RAS# Activate to Precharge: 12
TRFC: 25
TWTR: 9
TRRD: 2
TRTP: 2
DRAM Static Read Control: Auto
Transaction Booster: Enabled
- Boost Level: 2
(Performance Ratio: 8)
CPU Voltage: 1.30
CPU PLL Voltage: 1.60
FSB Termination Voltage: 1.10
DRAM Voltage: 2.00v
North Bridge Voltage: 1.40
South Bridge Voltage: 1.05
Clock Over-Charging Mode: Auto
Load Line Calibration: Enabled
CPU Voltage Reference: Auto
North Bridge Voltage Reference: x.61
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
Advance CPU Settings
CPU Ratio Control: Auto
- Ratio CMOS Setting: 9
C1E Suppport: Enabled
Max CPUID Value Limit: Enabled
Vanderpool Technology: Disabled
CPU TM Function: Enabled
Execute Disable Bit: Enabled
SpeedStep: Enabled
The Premium is an awsome version w/ few new BIOS options important to getting more out of you CPU/RAM OC. The E6750 is a nice OC'r and is averaged to 515FSB but loves the 500FSB easy and is exactly what I had on this mobo back in July. So YES, this or the Premium is gonna get you further then on the Gigabyte in my opinion. 3.85GHz is a snap @ only 1.48v and a 5:6 for DDR1153. This is a 24/7 profile as also used on my X38 version. 3.50GHz as 500x7 1:1 DDR1000 is much easier and cooler w/ 1.36v (I have lower VID, so it can very to not much more then 1.41v).Quote:
Originally Posted by R@ptor =]]
Quote:
Originally Posted by Nuckin_Futs
i did all that but still same problem A1 suite refuse to load?????
by the way what FSB this board support.is there some body did 600 FSB
with this board???i manage 550FSB with E6850.
I only had E6300 to play with for high FSB, so I can say mine hit 533 w/ ease, but have been told it has reached 560 or so w/ the right CPU.Quote:
Originally Posted by xpower
Ai Suite has given me problems since new on both this and my X38 mobos so I'm not sure. If you're curious, try iy while at stock. But may very well be a BIOS version issue since thos supports need to be written into BIOS and I noticed most BETA BIOS lack a few things such as a few real world needed things such as S3/STR.