so nice! how did you paint :p: was it spray or yea..Quote:
Originally Posted by BrokeDown
Printable View
so nice! how did you paint :p: was it spray or yea..Quote:
Originally Posted by BrokeDown
magic :DQuote:
Originally Posted by ls206
gah! that's no help whatsoever!!
:hm: :poke:
Looks like spray paint to me. Look at the 5.25 bays, you can see where some of the screws rubbed the paint off.
yea. thats the downside to paint. its not that bad though. i don't have a window either.Quote:
Originally Posted by Nate P.
cool.
yea I'm thinking of just painting the visible area of the case.
maybe I'll wait until the weather gets better else I'll suffocate spraying in my room ><
Yea, thats not a good idea. Definitely do it outside or somewhere with alot of ventilation.Quote:
Originally Posted by ls206
UV read?
From Petras? :)
Nice build btw. :)
looks great bundy!
can you take some pics of that aquaero and what functions it has?
I´m using Food color + Innovatek Protect
More about the aquaero:
http://www.aqua-computer.de/download...071105engl.pdf
http://www.aqua-computer.de/e_content/e_aquaero.htm
:)
I second that. I sprayed the rear deck on my car and even with some ventilation my basic arithmetic is worse than it was before breathing in that stuff for hours.:p:Quote:
Originally Posted by BrokeDown
You've been showing your tubes with red coolant and plexi covered video card for quite some time Bundy. Any full view shots? Any new additions to your system? I'm sure we'd all like to see some changes.
Not a hater, just asking.
ooh - that looks like a shiny new PC-343B :D
Do you have any more pics?
What do you think of this? Dual loop internally mounted in a Lian Li V1100B. :)
Do you think it is going to be a tight fit? :( (Of course tight, but to tight?)
where is the bottom pump going to go? sitting on top of the fan? huh?
Yes. On the top of the fan. Fan grill you see... :)
Do you think it can work?
And this was just to illustrate my thoughts. I must try to clean up the two loops of course. :)
the case is just too small for what your trying to do.. trust me
im a previous owner.. either do 1 loop or get the full tower
Okay. :(
But I'm shure the radiator's will fit, but thats not the biggest problem? Is it?
I can't see the problem, but that's probably just because I am so excited about it. :p:
you might also have a problem fitting the front fan and the rad in the bottom.
Keeping the stock support brace where it was in my 1200, there was about a few millimeters on each side, so basically no room left. If you look back at my case, you'll see what I'm talking about. Also, you have to take into account how long your PSU is going to be.
Loving the red UV plastic.Quote:
Originally Posted by bundymania
I like the Rear Fan exposure in this picture, almost synthetic.Quote:
Originally Posted by bundymania
My PSU is 15 centimeters long. So I don't think that is going to be a problem. I saw one person that have mounted the same radiator in his case, here in my home country. A MCR-220.Quote:
Originally Posted by BrokeDown
I am going to remove the front fang because I dont need it there anymore.
hi there! i was thinking about your set up and tried grabbing a pic of the lian li v11000 case and realised you might not have space for 2 video cards as the top card will be right next to the rad. could be wrong, but am looking at my tj07 and i think it would struggle!Quote:
Originally Posted by LockBreaker
Thanks mate. I really appriciate your comment. :)
With an MSI MB it should work. But Its possible that I don't innstall two cards before I get a bigger case. :)
I don't need SLI the first years so... :)
must admit I'm curious too, 37 posts and most of them are pretty much the same picture.Quote:
Originally Posted by Dark Prodigy
Here is my rig finally put together neat as I can :p:
High resolution pictures, but imageshack should resize for your screen :cool:
http://img159.imageshack.us/img159/6...8435dc5.th.jpghttp://img263.imageshack.us/img263/6...9163hv5.th.jpg
http://img263.imageshack.us/img263/6...9216wj9.th.jpghttp://img263.imageshack.us/img263/2...1471yn4.th.jpghttp://img263.imageshack.us/img263/1...2789pp4.th.jpg
Comments welcome, this is my first water cooled build, and I think I did OK. I am using a MiniNG on the 18W ultra pump, dialing the voltage down a small amount takes the edge off the low bass humm it produces :)
500x8 E8500, Abit X38, 2x1GB OCZ Titanium and so on.....
Cheers! :D
Looks nice ^^
Im sure you could neaten up those cables some more tho
cable mangement por favor:DQuote:
Originally Posted by Mickey Padge
btw, i have kandalf too, just heavier one, black:)
and custom cooling ofcourse
Hehe, I am no neat freak thats for sure :)
Actually it was worse before, you should have seen it! Now at least the cables go behind the motherboard backplate and are out of the way for the most part. The main thing is that airflow is good, function over form for me!
What else could I do to improve it? The door opens at the front, so the tubing and fan cables to the rad need to be long enough to open and close without issue.
Plus I have a FireDTV DVB-C card, which trails the firewire and aerial cable across the case. It's not that bad is it?!:p: :D
http://i120.photobucket.com/albums/o...8022008555.jpg
http://i120.photobucket.com/albums/o...8022008553.jpg
http://i120.photobucket.com/albums/o...8022008554.jpg
http://i120.photobucket.com/albums/o...8022008558.jpg
http://i120.photobucket.com/albums/o...8022008561.jpg
http://i120.photobucket.com/albums/o...8022008567.jpg
My workstation rig... some old tech in here here... but nonetheless, it serves it purpose well.. :D
Specs:
Xeon 3040 1.83 @ 2.8ghz stock vcore
2gb 667 kingston valueram at 800mhz
Geforce 6600
Gigabyte p965 DQ6
verudium powerlite 430w
250 gb hdd - more to be added
Optical drive to be added... lol..
Wc system: TT bigwater 735, + mp-1 aqua extreme gpu block, TT Aquabay with flowmeter, TT water temperature probe, PC ICE UV red (not a big fan of tt stuff but hey, this set was going real cheap... :p: )
Nashaz: I think your rig looks sweet. Like the colour of your water.
Regarding my build. Should i try to put the two radiators in one loop then? But then i would need a stronger pump, an MCP-655 should do it. But i'm worried about the space. It's fairly larger then the MCP-355 with Petras top. :)
What do you think? :)
thanks m8.. :)
as for your rig, i feel that mounting that many rads in a mid tower is abit too tight... just wondering, have u considered the pcA71b?... or are u more into a silent solution?...
It is still doable in my opinion, that that it will be really tough to get it up and maintain it...
but i think the mosfet blocks and the nb/sb blocks are not necessary... reduces tubing clutter and u can keep the current config and placement...
sweet white rig!... :D got more pics of the inside?...
Meh, showing Tt, Koolance around here is akin to walking into a hibernating bears den and then poking said bear with a cattle prod with only enough juice for 1 jolt.Quote:
Originally Posted by Nashaz
lmao... i know, i saw you sig long before i registered... lol... thats y its my workstation (aka backup rig).. my main rig is still unfinished... wasn going to post it up till it was done... but heres a little sneak peak... :)Quote:
Originally Posted by Waterlogged
http://i120.photobucket.com/albums/o...9012008458.jpg
http://i120.photobucket.com/albums/o...9012008459.jpg
cpu- cooltrek 360, laing d5, dtek with nozzle, alphacool bay res, 1/2" ID tygon, pc ice blood red...
gpu's - 2x mcw60, mcp 655-b, black ice gt 240, mc-res, tygon 1/2" ID, pcice yellow...
:D
It is obvious a lot of effort has gone into that. It's a neat rig to. Nice work, need to darken background or take photos without flash to see the most out of the liquid, or are you getting UV's?
Nice work
That Coolant color makes me sick, J/K. :D
Nice setup there. What case is that ??
Thank you bro... :)Quote:
Originally Posted by The0men
ive gotten some red and yellow leds, just that i havent fixed them in... was fixing up my workstation so that i could take my gaming rig offline... also, got abit more cable management to be done as well as install a couple more things... :D
lol... Lian li PCA71B... i was expecting the red to be redder and the yellow to be more yellow... am thinking of changing to fluid XP ultra for the red.. their blood red is sick... but i heard that it makes your loop waxy and such so am still reconsidering..Quote:
Originally Posted by ANP !!!
Hi Guys...
http://www.coolenjoy.net/bbs/data/system/IMG_4136.jpg
http://www.coolenjoy.net/bbs/data/system/IMG_4461.jpg
http://www.coolenjoy.net/bbs/data/system/IMG_4474.jpg
http://www.coolenjoy.net/bbs/data/system/IMG_4444.jpg
http://www.coolenjoy.net/bbs/data/sy...2/IMG_4457.jpg
SYSTEM SPEC.
- CPU : INTEL Core 2 Extreme QX9650 3.0G@4.8G
- M/B : ASUS MAXIMUS FORMULA S/E
- RAM : OCZ HPC PC2-9200 2G
- VGA : ATI RADEON HD2900XT CF
- HDD : WD Raptor 74G X 2 RAID, WD 500G , SEAGATE 500G X 2 etc.
- ODD : PIONEER DVR-A212B etc.
- POWER : PC POWER & COOLING TURBO-COOL 1KW-SR
& Thermaltake Toughpowr 1200W
- CASE : Lian-Li PC-343B
- COOLER : Swiftech Apogee GTX Extreme... etc.
- MONITOR : DELL 3007WFP
- SPEAKER : Logitech Z-5500 Digital THX
- KEYBOARD : ATESSA Crystal PRO-X AKB-109U
- MOUSE : Logitech MX Revolution
GO! GO! MY NEW SYSTEM GALLERY
http://www.xtremesystems.org/forums/...d.php?t=176358:welcome:
Nashaz nice pic's :D my A71a will be watercooled soon
http://img143.imageshack.us/img143/8136/pcallnq6.jpg
http://img444.imageshack.us/img444/9...seuphddib7.jpg
Before & After Thermochill G 3/8 x 1/2: $17 :ROTF:
http://img238.imageshack.us/img238/7677/barbshs6.jpg
-Three 120x38MM Denkis at 100% 24/7 Pushing Up out of Top Grill.
-Hydrx Water Additive
-EK Block install went smooth as a whistle.
-Fan Covers, EK Block, Clear Wire Ties, Hydrx and HDD Bay Scythe Slipstream Fan all from Petra's Tech Shop.:up:
Thanks bro.. looking forward to your rig.. :)Quote:
Originally Posted by Origin_Unknown
ocx: u powdercoated your rig?... looks pretty slick... :D
Jeikim: the motherboard section looks sweet, but mabe u can try to neaten up the reverse side?.. :)
Were can I get 90 degrees fittings for the Swiftech MCR-320 QP radiator? I figured out that I may need some of those. :)
just a small preview.... making an article for print
http://img223.imageshack.us/img223/8208/dsc00528va8.jpg
Thats a pretty unique setup you have their :clap: . Curious on how well it does.Quote:
Originally Posted by cka3o4nuk
jeikim ur computer, jesus, it might roll off that little table
You can lock the wheels but year, I would't have it like that if kids are near :D
New Coolermaster COSMOS non-bling build:
http://img155.imageshack.us/img155/9795/insideyc3.jpg
Full thread and more pics:
http://www.xtremesystems.org/forums/...d.php?t=176414
p.s. I apologize for the picture quality, I am many things but a photographer is not one of them.
non-bling = win
Agreed, especially around XS.Quote:
Originally Posted by Origin_Unknown
+1, looks excellent! Great job mate!:DQuote:
Originally Posted by Nate P.
I like a little bling :(
A couple of LED fans here and there are fine by me, but a few cold cathodes and it becomes over the top, IMO.Quote:
Originally Posted by rbsmontemor
No bling, but with blue coolsleves ?
Meh, coolsleeves serve a purpose and Petra only sells the blue ones for 5/8" OD tubing (although they will likely come off now that I am fairly sure kinking is not an issue). Now if I had a bunch of UV cathodes spattered about that would be different. If anything is worthy of comment it is the crayola crayon color scheme (or lack thereof) on the GB mobo.Quote:
Originally Posted by IanY
Too bling?Quote:
Originally Posted by Nate P.
CC off:
http://img502.imageshack.us/img502/7487/dsc09193uc8.jpg
CC on:
http://img143.imageshack.us/img143/143/dsc09188us5.jpg
(Crappy pic I know)
I like it a lot :D
Rbs.
:wave:
Nothing wrong with it, just not my speed that is all. Besides I made sure not to mix metals in my loop so the uber-additives would not be necessary. Once you loose the additives the cool factor of the UV fans and the like drops fast.
Looks better with the cathode off rbs :)
I like some bling on a computer. I like when people see the lights coming off my computer and think its some sort of super computer. When its done in a tasteful manner such as rbs's build, I think it looks great.
Otherwise why have a window on the side of a computer if theres nothing to wow. (Plus you cant see anything at night in the case without some lights)
Just my opinion.
rbs, who makes that 8800GTS?
It's a bad pic, but it looks better with the thing off, you right :DQuote:
Originally Posted by disruptfam
Rbs.
:wave:
Thanks!!Quote:
Originally Posted by ForeverAgain
It's Nvidia's OEM, long story hehehQuote:
Originally Posted by Nate P.
Rbs.
:wave:
I think it's a better pic, just older, and without UV thing on water:
http://img165.imageshack.us/img165/8051/dsc09061iw9.jpg
http://img242.imageshack.us/img242/16/dsc09054ti9.jpg
Rbs.
:wave:
Why did you go from a 8800 Ultra to a 8800GTS?
Faster, smaller, cooler...cheaper :)
But you already had the 8800 Ultra?Quote:
Originally Posted by rbsmontemor
For good 5 months:Quote:
Originally Posted by Nate P.
http://img209.imageshack.us/img209/7...9077br2.th.jpg http://img208.imageshack.us/img208/9...8772cz3.th.jpg http://img407.imageshack.us/img407/9...renata5.th.jpg http://img407.imageshack.us/img407/4...renall4.th.jpg http://img140.imageshack.us/img140/8782/vgalm1.th.jpg http://img132.imageshack.us/img132/2...8445te5.th.jpg http://img254.imageshack.us/img254/7...8428fs6.th.jpg http://img179.imageshack.us/img179/4...8423ye9.th.jpg http://img381.imageshack.us/img381/8...8286qd0.th.jpg http://img142.imageshack.us/img142/6...8064lh9.th.jpg
Hope you believe me now hehe.
Rbs.
:wave:
If you already had the 8800 Ultra, I would have stayed with that. It still is better than the G92 8800GTS...
No way heheh, this GTS G92 beats hard my 8800Ultra @ 684/1650/2320
Update -> now with EK Supreme :)
http://www.abload.de/img/img_0173ztz.jpg
http://www.abload.de/img/img_0213bpc.jpg
What block do you had before? And about the temps?
Rbs.
:wave:
Before was a Zern PQ+ Nickel Ed. (zern.at) installed -> The EK Supreme is mounted since today , i can only tell ya about the idle cpu temps atm, its about 5° better, Waterflow is app. 30 Liters / h. better than with the Zern Waterblock.
http://www.abload.de/img/img_0173zlt.jpg
Heh, who said I had a window :up:Quote:
Originally Posted by ForeverAgain
@imapwnu - how secure is that res? it looks like it might warp the mesh screen? but otherwise that is pretty sweet build!
sweet build man are there 2 rads in there?
i would hope so with that many blocks in there, or atleast a 120.3 with highflow fans and a good pump.
Imapwnu, I'm wondering how do those enzotech ramsinks work on the mosfets?? i was just thinking about doing the same thing.
i can only see 1 120rad :shrug:Quote:
Originally Posted by Pedalmonkey
awesome rig dark redeemer..
andreiod showed us your rig awhile looks great..
what rad do you have? and what are your temps?
he probabally has a 3x120 in the front of the cm stacker from the way the tubing is flowing...
btw, nice rig guys... alot of u seem really keen in using mosfet blocks... lol...
dark-redeemer, damn! you got everything under water
and the setup looks sooo cool
i love the "threaded" look of the hoses :up:
btw, what case is that?
Thanks. I've a Thermochill PA 120.3 mounted on the bottom of the case.
I have a B3 stepping Quadcore CPU running at 1,45V Vcore so the system gets quiet hot. CPU Core temperature heats up to about 70°C after 2 hours of Prime95. Andreoid did an awesome job with the Mips Freezer top. I love it :)
@Janno: Thx. That's a Silverstone TJ 07 case.
Nice redeemer! ive seen your rig on OCN too
I have a GTX 240 rad with pushpull yates mounted in the front.
My CPU temp is hot as hell too man :( i load 80C at 3.6Ghz, probably because I have so many parts in my loop
Here's mine after a little refresh..:)
http://img233.imageshack.us/img233/4837/img1052pp4.jpg
wow very nice!! i love that black tubing is it tygon? what size? Are you using compression fittings? if so which one?Much temp diff after installing smaller tubing mate?
cheers!
Thx mate :)Quote:
Originally Posted by disruptfam
Yes,it's Tygon R3400 (3/8 ID 1/2 OD)
Fittings are D-Tek 3/8.The tube is really tight so I'm not using any clamps.
Well I can't make a straight comparison because I switched from MCR320 to PA120.3 and also I added maximus fusion block in the loop.
thanks mate!!!
I will be using that same tubing and ek/d-tek or compressions fittings (haven't decided yet) when i revise my current system :)
Looks great! any more pics man?
damn nice rig dude... :clap:
black tygon rules... :D
my p180b yes i know the coolant looks stupid but i hated using that pc ice crap so im running distilled water now
http://img27.picoodle.com/img/img27/...6m_3741d52.jpg
Nice job with the painting, the cables are also very neat !
Do you have a window mod to show it all off?
You may want to look into grabbing some blue pentosin to mix with the distilled. It accomplishes the same thing as the Hydrix you have in there now (I assume it is hydryx, or maybe just some standard antifreeze) and won't clash as badly. Just a thought.
Nice build mate. What kind of radiators are you using? It shure looks sweeeet. Almost as good as candy, only better. :)Quote:
Originally Posted by imapwnu
Is that the Samsung 245BW? Or the 245T? :)
In my home country it got some bad reviews, but I think the image looks great.
Are you happy with your samsung? :)
Nice build, what are you using for the lighting?Quote:
Originally Posted by ReaperX
2 Logisys red cathodes on a sunbeam rheobus.Quote:
Originally Posted by Poncet