DDR2 Full Specs

Printable View

Show 100 post(s) from this thread on one page

06-07-2006, 05:46 PM
G H Z

Quote:

Originally Posted by s7e9h3n

Here's what was under spreader #1 (512mb, single sided).

This was what was under spreader #2 :eek: :

WTF, have you confirmed that one stick is 1GB during POST or in Windows? I thought 512 could be double sided, maybe not with these IC's tho I don't know.
06-07-2006, 06:30 PM
s7e9h3n

Quote:

Originally Posted by G H Z

WTF, have you confirmed that one stick is 1GB during POST or in Windows? I thought 512 could be double sided, maybe not with these IC's tho I don't know.

The 1gb stick posts into Windows although I haven't tested how high/tight it can run. I thought I had told you already that if they were fatties, double sided means that it's a 1gb stick :( .....
06-07-2006, 06:41 PM
RyderOCZ

With DDR2...you can get a 1GB stick with IC's on only 1 side of the PCB....expect to see 2GB sticks become more common in the near future.
06-07-2006, 06:42 PM
s7e9h3n

Quote:

Originally Posted by RyderOCZ

With DDR2...you can get a 1GB stick with IC's on only 1 side of the PCB....expect to see 2GB sticks become more common in the near future.

But not with fatties ;)
06-07-2006, 06:44 PM
RyderOCZ

Quote:

Originally Posted by s7e9h3n

But not with fatties ;)

Sorry, I didn't realize you were specifically checking for fatties....I should have read more of the thread :shrug:
06-07-2006, 06:45 PM
Sentential

Quote:

Originally Posted by s7e9h3n

But not with fatties ;)

I disagree and so will Ryder
06-07-2006, 06:46 PM
RyderOCZ

Quote:

Originally Posted by Sentential

I disagree and so will Ryder

Shhhhh.....let him think I am wrong :D :p:
06-07-2006, 06:46 PM
s7e9h3n

Quote:

Originally Posted by Sentential

I disagree and so will Ryder

Ok...fine :P Please point me to the nearest 2gb fatty stick then :woot:
06-09-2006, 12:55 AM
Kabauterman

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:

http://img170.imageshack.us/img170/5537/d95mr.th.jpg

http://img170.imageshack.us/img170/7...03702xf.th.jpg

Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter
06-09-2006, 12:57 AM
s7e9h3n

Quote:

Originally Posted by Kabauterman

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:

http://img170.imageshack.us/img170/5537/d95mr.th.jpg

http://img170.imageshack.us/img170/7...03702xf.th.jpg

Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter

Those are sweet sticks :toast:
06-09-2006, 01:06 AM
Kabauterman

i think so too, i i have read the label ;)

i have been surprised over D9 on the Sticks.

i Think it's time to update Post 1 with this chips on the DDR2-800 CL4 Ballistix
06-09-2006, 01:07 AM
s7e9h3n

BTW....welcome to XS! :toast: I'm sure gorrillaman will update it soon:D
06-09-2006, 01:15 AM
Kabauterman

ty for welcome

but why i can't get RAS Precharge of 2 i think it is a character of D9 chips
06-09-2006, 05:20 AM
DaWaN

Quote:

Originally Posted by Kabauterman

ty for welcome

but why i can't get RAS Precharge of 2 i think it is a character of D9 chips

You don't have the well known Fatbody chips, but a newer D9, it should clock very well on a little bit looser timings than fatbody, just try it, those sticks are very good for that price you've paid ;)
06-09-2006, 05:25 AM
Kabauterman

416 @ 4-3-3-12 is no Problem with 2,3 V

The only Problem is than i can never Test the Max Clocks, with the 667 divider of the AOpen Board can i get only 418 MHz by the Best FSB 251 MHz
06-09-2006, 01:00 PM
Stelios

Finally , i'm an owner of some fatties ... :)

http://www.xtremesystems.org/forums/...1&d=1149886764

http://www.xtremesystems.org/forums/...1&d=1149886764

http://www.xtremesystems.org/forums/...1&d=1149886764

Bought from Ebay .
06-09-2006, 01:10 PM
Kabauterman

nice pics :toast:

and how good are these Original Micron?
06-09-2006, 01:14 PM
Stelios

Quote:

Originally Posted by Kabauterman

nice pics :toast:

and how good are these Original Micron?

Right now i don't have a DDR2 board . You see , i'm waiting for conroe mobos and right know nothing is available in Greece (except Intel) ...

I'll test them tomorrow with a 930 and a P5LD2 with a single stage ... Hope to clock nice . :)
06-09-2006, 02:50 PM
deadlock7

I'm sure they will clock fine..(i hope so)!
06-09-2006, 04:29 PM
ozzimark

Quote:

Originally Posted by deadlock7

I'm sure they will clock fine..(i hope so)!

i bet they do. my crucial value stick does quite well, even if it's a 256mb with BN-3 :D

http://eclipseoc.com/phpwcms_filestorage/1/1_267.png

Quote:

Originally Posted by Kabauterman

416 @ 4-3-3-12 is no Problem with 2,3 V

The only Problem is than i can never Test the Max Clocks, with the 667 divider of the AOpen Board can i get only 418 MHz by the Best FSB 251 MHz

bummer.. i have the same set as you, it seems that 4-4-3 is capable of 520mhz :eek:

i should pop off the spreaders as well and see if it's the same B6 chip binned to -25F speeds. how did you take off the spreader without ripping up the chips too?
06-09-2006, 10:46 PM
Sentential

Quote:

Originally Posted by Kabauterman

If have buyed 2GB Crucial Ballistix DDR2-800 CL4 for 199 € in an action on www.alternate.de (Germany)

today i want know wich chips are under the Heatspreaders and i decide to remove the HS.

And this is what i found:

http://img170.imageshack.us/img170/5537/d95mr.th.jpg

http://img170.imageshack.us/img170/7...03702xf.th.jpg

Are there realy D9 on this Cheap RAM's ?

A funny thing is the relabe you can see the original Micron label and over it is a simple BALISTIX.

I Have Tested the RAM's on an AOpen i975Xa-YDG and i gived 2,5 V VDimm and can go to 418,5 ( 3-3-3-12 ) whit Activ Cooling, but i cant give X-X-2-X at this Clocks. I cant get higher Clock wich an 251 MHz FSB.

Sorry for my bad english.

so long kabauter

Fantastic RAM. You have the highest binned chips Micron has to offer. B6-25F
06-10-2006, 01:33 AM
Kabauterman

Quote:

Originally Posted by ozzimark

i bet they do. my crucial value stick does quite well, even if it's a 256mb with BN-3 :D

http://eclipseoc.com/phpwcms_filestorage/1/1_267.png

bummer.. i have the same set as you, it seems that 4-4-3 is capable of 520mhz :eek:

i should pop off the spreaders as well and see if it's the same B6 chip binned to -25F speeds. how did you take off the spreader without ripping up the chips too?

i pushed a credit card under the metal Clips on both sides and pull them up.
Then i use a hair dryer aber make the HS hot so i can pull the HS up from the Chips.
06-11-2006, 03:36 AM
|SiLA|

i've bought ocz vapue pro 2x1 and running them without any probs at 800(300*15) 5444 2vdimm with my pentium D 930 i think they can go a bit higher

but worth the price..paid em 170 euros labled 333mhz 55512 1,8v

:woot:
06-11-2006, 12:36 PM
s7e9h3n

Here are my new Ballistix PC2 5300 :p:

http://img46.imageshack.us/img46/7041/ica6wp.jpg
06-11-2006, 12:40 PM
ozzimark

Quote:

Originally Posted by s7e9h3n

Here are my new Ballistix PC2 5300 :p:

[IMG]http://img46.imageshack.us/img46/7041/ica6wp.jpg[IMG]

mmmmm, the sticker probably says .16FB, doesn't it? :cool: (or are they 512mb sticks, single sided. that'd make it .8FB :D)
you're a lucky one. haha

i guess i'll pop the spreaders off my ballistix too, but i have a feeling that i'll see -25F binned D9GMH under there

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 11:01 AM.

XtremeSystems