Printable View
Sorry didnt read the start of the thread just thought we where posting bandwiths etc some one said the ocz boys where keeping quiet so I posted but yes you are right my ram the 4200 2 x 512 run at 8,4,4,3 which is poo but in my a64 system they are stable and yes they do cost too bloody much
I was assuming you were talking about ocz el 4200 platinum TCCD? Yours looks like the older 4200+ (ras-4 at only 270mhz) this can't be tccd.Quote:
Originally Posted by fatty
No the 4200 is just the performance memory I dont know how much it costs in the us but here it is expensive I did have some twinmos ch-5 but you had to throw huge volts through it to overclock and my a64 mem controler didnt like it ??
And dont think it is tccd
Quote:
Originally Posted by fatty
We'll the whole point of the twinmos is that we are trying to see how it reacts to really high volts. So if you don't want to vmod or use a ddr booster, then you are better off with tccd. But for those that have volts to throw at it, this is a serious find.
Sorry will see if I can stick my other foot in ok
My CH-5 I stuck 3.6Volts through it and I think it damaged my fx53 mem controller
http://www.komplett.co.uk/k/ki.asp?sku=118498&cks=SPK
Is that likely to be the good stuff? or jsut bog standard twinmos?
I bought a matched pair from there and it was m tech chips they do sell windbond chips think they will be ch-5
http://www.komplett.co.uk/k/ki.asp?sku=115490&cks=PRL
Quote:
Originally Posted by trans am
problems with early amd64 mem controllers and high volts seems to be disapeared. since i bought those mems they run 24/7 @ 3.5V with a 8cm tornado on the booster and mems
No problems, random reboots or anything so far
not ch5, they are winbond utt blank chips.Quote:
Originally Posted by fatty
damn it even puts tccd to shame. Come on guys, find out the truth so I can pick up a gig of this stuff too. Now if only Hipro5 would hurry it up with his maximizer thingy.
Quote:
Originally Posted by trans am
i highly suspect they are untested CH chips
how about this stuff ?
http://www.komplett.co.uk/k/ki.asp?sku=115491&cks=PRL
OK, well then Twinmos person I spoke to on the phone is lying to me. Honestly, CH5 would cost too much for these to be budget chips. Look at the price, even if untested, I believe they would cost more money. That is why the utt blank would make more sense. Look at the price, plus, how much CH5 do you see going over 240/250mhz Mhz at 2-2-2? :stick:Quote:
Originally Posted by enzoR
i like my instict!
http://www.xtremesystems.org/forums/...&postcount=139
The ones you want at komplett.co.uk are the cheaper unmarked sticks. Please note the twinmos serial/product numbers in the links.
These are twinmos 256mb pc3200 sticks serial no. M2G9I08A-MK
Cheap twinmos unbranded
twinmos 512mb pc3200 serial no.M2G9J16A-MK
should be winbond utt
I have got a stick of the 256mb M2g9108A-mk coming soon. Komplett have despatched via Parcelforce so it should get to me sometime this week.
Rob H
what did the twinmos person tell you?Quote:
Originally Posted by trans am
CH just means the manufacturing process... 0.13
BH is .18
they are exact same design just a process shrink.
why would they design totally new chips...
UTT just means untested. they could be anything but since winbond only produced CH after BH this means they are untested CH....
my CH-5 bought 1 year ago does 260 2-2-2-5 at 3.6v
at 2.8v it would only run 210 max 2-3-2-5 :)
Last time I bought the twinmos windbond from komplett it was the cheapy single 3200 sticks not a matched pair and they where ch-5 not sure what the ones they have now are
the CH-5 that i have is 0320. they are actually total crap. They dont like ANY divider past 255mhz fsb (208 in 5:4) and even less in 3:2.
atleast they perform a bit in 1:1 with volts.
thats another thing i heard that was in common with VX. the VX also doesnt like dividers or something.
Yeah I knew that about the duel channel kits loool :D
Also can you post some duel channel bandwith scores from your ch-5 running at 240 with tight timmings unrealneo2 cheers
interesting. I had issues with my vx with dividers in the bios on the neo2. only way for a divider to work was use a64 tweaker. I tried all available beta bios for neo2.Quote:
Originally Posted by enzoR
Earlier I mentioned Infineon, but now I think Infineon has nothing to do with this stuff. Winbond and Infineon have an agreement. Winbond makes the chips for Infineon. In exchange, Infineon gives them some technology and money. I'm not sure what technology though. So you are saying CH5 = UTT (un tested ch5?)
well what i'm saying is that these UTT are based on CH wafer/technology/and design. Winbond didnt make anything new after they stopped producing CH half a year ago. all they are doing now is just fireing up the machines for infineon i think. Youve got CH-5/6/7 this UTT is all that + failed chips all jumbled up :)
Quote:
Originally Posted by enzoR
highly possible but they performe hella nice for ch-5 + their price! don't you think? ;)
are they actually winmoss tho ?Quote:
Originally Posted by pcworks
may buy 2 x 512Mb sticks :)
My girlfriend called me, twinmos Speed Premium just came from newegg. She said it's from week 0446 and it has the dimples. I'll be home soon...
give her a big kiss for me lol transam
BH-6 is .18, BH-5 is .16 IIRC, CH-5 was a whole new die, a crippled BH-5 designed to be cheaper...Quote:
Originally Posted by enzoR