I want your GTX460 vBIOSes!

Printable View

Show 100 post(s) from this thread on one page

09-07-2010, 05:46 PM
Ket

1 Attachment(s)

cole2109, there you go.
09-07-2010, 09:45 PM
boostedevo

Quote:

Originally Posted by lowfat

http://www.xtremesystems.org/forums/...9&postcount=34

Here ya go. CrazyNutz modded the bios for me in another thread a few days back.
Not sure about the fan speed though. I don't know if that has been resolved besides w/ eVGA bioses. My card is on water so I can not test it myself.

Thanks, I'll give it a try. The Asus DirectCU 768MB worked, 1.21V and 100% fan. 93% is highest RPM though :D
09-07-2010, 10:59 PM
cole2109

Quote:

Originally Posted by Kelso

@cole2109
Attachment 107469

Quote:

Originally Posted by Ket

cole2109, there you go.

TNX :up:
09-08-2010, 04:31 AM
Ket

Hopefully I can rejoin GTX460 owners soon. I sent both my KFA cards back in the end and am getting them replaced with a set of Asus DirectCu 1GB 460s instead. The main reason I decided to do this is because as much as I liked the KFA cards, dual BIOSes were a pain in the arse and the fans on them were LOUD. I never realised how loud until I stuck the 5830 back in.
09-08-2010, 04:35 AM
Gaul

Zotac GTX 460 1 GB BIOS

http://www.2shared.com/file/rL_eL3r5/ZDEF.html

make 100 % FAN and overvolt plzzzzz :)
09-08-2010, 04:38 AM
Ket

Already done. Doesn't anybody read the first post?
09-08-2010, 04:42 AM
kup

Quote:

Originally Posted by Ket

Hopefully I can rejoin GTX460 owners soon. I sent both my KFA cards back in the end and am getting them replaced with a set of Asus DirectCu 1GB 460s instead. The main reason I decided to do this is because as much as I liked the KFA cards, dual BIOSes were a pain in the arse and the fans on them were LOUD. I never realised how loud until I stuck the 5830 back in.

You won't be disappointed with the DirectCU cards. They're cool and quiet and overclock well! :cool:
09-08-2010, 05:25 AM
kup

Ket,

The second DirectCU bios is 1GB. That was my one. :)
09-08-2010, 06:35 AM
Ruben

Quote:

Originally Posted by kup

Ket,

The second DirectCU bios is 1GB. That was my one. :)

Is it the same as the dcu top version? I've got the dcu top and want to flash my bios, but since it is the first time for me, I am unsure about what could happen if there are differencies.
09-08-2010, 06:57 AM
kup

The Top version has higher stock clocks.

I've just modded the TOP bios from earlier in this thread for you. :)

http://www.megaupload.com/?d=7M7NFH20
09-08-2010, 08:17 AM
Ruben

Quote:

Originally Posted by kup

The Top version has higher stock clocks.

I've just modded the TOP bios from earlier in this thread for you. :)

http://www.megaupload.com/?d=7M7NFH20

Thanks a million! :up:
09-08-2010, 05:15 PM
Ket

Yep, same cards, one is just stock clocked higher and probably given slightly more default GPU voltage.
09-08-2010, 05:19 PM
Ket

Quote:

Originally Posted by skankinred

1. Nvflash 5.88 didn't work with my GTX460. It said it couldn't detect any Nvidia adapters. So I looked for the latest version.
2. Of course I didn't actually type "filename.rom".... C'mon now.

I never said nvflash 5.88 worked, pretty sure I've said in here it doesn't work and you need at least nvflash 5.91 :p: You deffo didn't do something quite right anyway, tis a simple step process;

nvflash --protectoff
nvflash --eraseeeprom
nvflash -j -4 -5 -6 filename.rom

;)
09-08-2010, 09:29 PM
Gaul

Quote:

Originally Posted by Ket

Already done. Doesn't anybody read the first post?

done,
already use u'r mod BIOS, but zotac 1 GB, still limit fan 70 %

http://img836.imageshack.us/img836/8255/12476370.jpg
09-09-2010, 03:24 AM
Ket

I changed fanspeed to 100% in the last pack, I'll reupload it.
09-09-2010, 03:43 AM
Gaul

Quote:

Originally Posted by Ket

I changed fanspeed to 100% in the last pack, I'll reupload it.

THANX, Tell me if done.....:)
btw,I had request if u don't mine, here

Max voltage limit 1.2v
3D GPU voltage 1.000v def
2D GPU voltage 0.875 def ?
http://img839.imageshack.us/img839/1538/0875.th.jpg

3D GPU clockspeed 675MHz def
Memory speed 1800MHz def
Max fanspeed changed to 100%
09-09-2010, 04:08 AM
Ket

I'm not doing millions of different personal custom BIOSes it'll take far too much time. Everybody gets the same treatment;

- 3D GPU 800MHz
- 3D Memory 2000MHz
- Voltage limit 1.2v
- 3D Voltage 1.1v
- 2D voltage 1v
- 100% fanspeed on applicable cards.
09-09-2010, 04:35 AM
Gaul

Quote:

Originally Posted by Ket

I'm not doing millions of different personal custom BIOSes it'll take far too much time. Everybody gets the same treatment;

- 3D GPU 800MHz
- 3D Memory 2000MHz
- Voltage limit 1.2v
- 3D Voltage 1.1v
- 2D voltage 1v
- 100% fanspeed on applicable cards.

ic ic not a big deal, make sense and thanx 4 evertything

anyway already done upload 100% FAN SPEED ? for zotac GTX 460 1 GB ?
09-09-2010, 04:37 AM
Ket

Yes.
09-09-2010, 04:55 AM
Gaul

Quote:

Originally Posted by Ket

Yes.

WOW thanx again, DL NOW.........:D

work's 100% FAN but u forgot set the clock
- 3D GPU 800MHz
- 3D Memory 2000MHz

so it's still :
- 3D GPU 675MHz
- 3D Memory 1800MHz

for vgpu 1.1v, I think better if u set clock to :

- 3D GPU 850MHz
- 3D Memory 2000MHz
09-10-2010, 06:57 AM
vajm1234

hey Ket>>>>> Heres my POV Gtx-460 1024MB A2 Reference Bios<<<<<

http://www.speedyshare.com/files/241...NON_Modded.bin

EDIT -- can u tell me how to calc. the values there in FBE ..... i makes me drool >>i can understand few of em but all the bios that u posted has different values so it confuses me? :p:

i found the values diff only in

Quote:

- 3D GPU 800MHz
- 3D Memory 2000MHz

rest all ok n same afaiu

Quote:

- Voltage limit 1.2v
- 3D Voltage 1.1v
- 2D voltage 1v
- 100% fanspeed on applicable cards.

also afterburner changes only 3d voltages right?
09-10-2010, 07:02 AM
Aedubber

is there anyway to flash the BIOS in windows rather then going thru dos and boot up etc?
09-10-2010, 07:36 AM
Ket

Quote:

Originally Posted by Gaul

WOW thanx again, DL NOW.........:D

work's 100% FAN but u forgot set the clock
- 3D GPU 800MHz
- 3D Memory 2000MHz

so it's still :
- 3D GPU 675MHz
- 3D Memory 1800MHz

for vgpu 1.1v, I think better if u set clock to :

- 3D GPU 850MHz
- 3D Memory 2000MHz

Clocks ARE changed to 800/2000. You may have a dual BIOS on your card which prevents the sticking of modified clocks. Or, you may simply just need to clean the drivers out and reinstall. GPU is set to 800 as its a safe value for everybody. People using these BIOSes are doing so at their own risk, but out of my own morals I still have a responsibility to try and ensure nobody gets any problems.

Quote:

Originally Posted by Aedubber

is there anyway to flash the BIOS in windows rather then going thru dos and boot up etc?

There is, but I really don't recommend it. Much safer doing it in pure DOS.
09-10-2010, 07:37 AM
papatsonis

Quote:

Originally Posted by Aedubber

is there anyway to flash the BIOS in windows rather then going thru dos and boot up etc?

nvflash 5.95
09-10-2010, 07:41 AM
Ket

Quote:

Originally Posted by vajm1234

hey Ket>>>>> Heres my POV Gtx-460 1024MB A2 Reference Bios<<<<<

http://www.speedyshare.com/files/241...NON_Modded.bin

EDIT -- can u tell me how to calc. the values there in FBE ..... i makes me drool >>i can understand few of em but all the bios that u posted has different values so it confuses me? :p:

i found the values diff only in

rest all ok n same afaiu

also afterburner changes only 3d voltages right?

1. Look at the shader speed, the shader is tied with GPU clock so half shader speed is GPU speed. EG: 1600 shader is 800MHz GPU.

2. Yeah, Afterburner only changes 3D GPU voltage.

3. Ta :D I have nothing better to do atm so I'll rebuild the BIOSes with some extra tweaks for people.

Show 100 post(s) from this thread on one page