I assume you are using SpeedStep? Mine displays 1.1 using SpeedStep also.
What's your batch number, Gendo?
Printable View
I assume you are using SpeedStep? Mine displays 1.1 using SpeedStep also.
What's your batch number, Gendo?
OK, wanna swap? :D Let's see what you can do with this difficult bastard of an E8600!Quote:
Originally Posted by dnottis
What was your max clock before you lapped it?
EDIT! Oh wait -- you are on water. What does your chip do on air? It's a totally different ball game.
yah. try 440 x 10 with a 1:1 divider. 2.1vdimm, 1.39vcore, small increases to vtt, vnb. disable speedstep. I wouldn't doubt this or that, or say, this isn't possible. it's very likely you put that chip on another mobo, and let another person try, and it reach 4.5g @ 1.4v stable.Quote:
Originally Posted by dnottis
I think I've tried everything already. Bumped up vTT, vNB, PLL, played with CPU GTL's, NB GTL, skews... everything. Nothing works, and it's been about 6 weeks trying so far.
dnottis... nice results if you ask me but ehm... you're in the wrong topic :P
Quote:
Originally Posted by JohnnyV
Well the comment was made that chips with 1.250vid suck for overclocking. To which I HAD to respond ;) After all E0 8500 and E0 8600 - the only difference is the multiplier - same chip otherwise ;)
Quote:
Originally Posted by Dee
before I lapped, 4.2Ghz was highest. Temps were too high. I haven't run air on a system in years. So for that I can't be any help. No idea what it does on air :cool:
I think I had speedstep disabled but I'll have to check and don't feel like rebooting:p:my batch is Q820A606Quote:
Originally Posted by Dee
I feel your pain man and know how frustrating it can be. I had myself a E8400 before and couldn't get that chip pass 3.9Ghz with 1.42v in CPU-z. Tried everything as well and spent several weeks (nights) tweaking the hell out of it without succes. Fortunately I could buy a second hand E8600 with a supposingly good batch. I decided to buy E8600 and was hoping it was not my board that was limiting the E8400 OC.Quote:
Originally Posted by Dee
I installed the chip in sunday and after spending just a few hours I got it orthos stable yesterday on 4.37Ghz with 1.38v in CPU-z. Ofcourse I will try to push it to 4.5Ghz but as someone else already described here, I also think 450FSB is hard to get stable while 455FSB e.g. could work. I know vcore is still pretty high but its a starting point.
@ Infa
Good idea, to post JohnnyV and my board settings over at the P5E3-Premium thread.
My e8600 came yesterday. It has a stock vid of 1.25. So far I've gotten 4.4Ghz(550x8) stable for 7.5 hours under Prime95_64 running small FFTs. Core 0 produced an error at that point, core 1 was still pluggin along at 8.5 hours when I checked it. So far I'm running 1.336v VID and 1.256v VTT. My memory seems rock solid at 1100@5-5-5-15pl9 so far, which is a big improvement from what I was able to run on my 9450. I may give it a day or two to burn in and for the AS5 to set before pushing it further, but it looks like it might just need a touch more VTT. Load temps under prime top out at 52C with these settings.
--Matt
not bad at all :)
just installed my Q822A435 and checked it's VID with Coretemp. VID = 1.2000
With everything at AUTO it's running at 1.168v in windows. Now let's get to work :)
oooh i'm so excited :p:
It's coming in the mail tomorrow! I better wake up early for the mail to arrive
4Ghz is peanuts for him :)
Pretty low voltage imho and I just put in 1.2v in the bios but with Vdrop and Vdroop this is what is left (see pic)
Screen was taken after well over an hour but it's now running almost 2 hours.
http://i34.tinypic.com/e9gdaf.jpg
Temps are high though for my set up. Might have to re-seat the cpu block. I still have the quad core chamber insert installed and was hoping not having to remove it.
Because i like this topic so much i have started it at the dutch website HWi. So all dutch oc'ers here should post their results there aswell. I will share all info right here for your database. I have noted the same rules as here so it is compatible info.
The chip I'm running at 4.4 is Batch Q820A324. An extra .25 on the FSB seems to have tackled that issue at 7.5 hours. Prime has been running fine since I left for work!
today im getting mine!! pep pep pep!! :D
man, how can computer parts be so exciting and fun!?
@ JohnnyV
Are you still using that modded 0605 bios for your mobo? How is your experience with it, does everything seems stable?
I'm really wondering what settings you need to get things stable. I think I use the following settings at this moment but I'm at work so have to recall them:
- vCore 1.382v in CPU-z
- CPU PLL 1.58v
- VTT 1.30v
- vNB 1.61v
- LLC performance
I know vcore is a bit high but I will finetune voltages when I found a stable setting. At least CPU was 9 hours orthos stable with above settings and vNB on 1.57v. However when I turned up RAM speed I needed more vNB, I think. But I have no clue what is reasonable to get 1800Mhz memory to run stable.
Hi guys, I just got an E8600, batch is Q826A457 with pack date 08/14/08, think it's a new one! I'm gonna test it on a Rampage Extreme, hope to get good results ;).
Hey Bee :)
It's hard to say about the new BIOS because 1 day after I installed it I got my E8600 and that's a whole different ballgame compared to the Q9450. I put some settings in... everything 2 nothces up from auto and booted. Windows hung during boot so I put the vtt and vNB 1 notch up and after that it booted and was prime stable for almost 2 hours. Then I went to bed.
More testing during the weekend because 4G is nothing for this batch :)
hey, be careful about the vNB. the premium board doesnt got any NB temp monitor, and its getting really hot! i got one small fan that comes with the board, and got it stock on the heatsink, and 1 90mm mounted on the side of the Lian li, and still when using 1.60+ i get black screen and freezing when booting, i use these settings for a 467 PL6 tight settings, and CL7 on the RAM, vNB 1.55 1.57 gets more unstable aswell as 1.53, 1.55 is the sweetspot, using 0.67 on the NB GTL, Keeping the VTT high doesnt change things much, keep it 1.10-1.20 , PLL dont need to be high either, 1.50-1.60. Clock Twister Strong, these settings are stable and giving me 12mb read.Quote:
Originally Posted by Pisklink
for 450fsb u can keep it 1.55 to, tried that once and it was stable, mem 2.1 CL 7-7-7-18 1869, strap 333. hope it works out!
Here's my official submission...
1.39v VID (in bios) - 1.376 under load
1.56v FSB
1.37v NB
2.16v DDR2
Thanks for your explanation. It's a real pity that this board hasn't a NB temp sensor. I had my vNB as high as 1.65v and I know that someone else on this forum has too with his OCZ 1800Mhz RAM. To prevent overheating I have a 90mm fan blowing directly at the NB. I also use 460FSB and 7-7-7-20-2T PL6 settings at this moment.Quote:
Originally Posted by Infa
I'm not sure if I can put 2.1v on these RAM modules. Moreover how did you get 1869Mhz on RAM with 450FSB speed?
EDIT:
This is my new result this far after 4 hours of prime95 on 4.4Ghz with the following settings:
- Vid = 1.2375
- Strap 333Mhz
- Vcore = 1.4125v in bios
- CPU PLL = 1.58v
- VTT = 1.28v
- vNB = 1.55v
- LLC = auto
- Spread Spectrums disabled
- Dynamic read / write disabled
http://img300.imageshack.us/img300/2070/44cputt2.th.jpghttp://img300.imageshack.us/images/thpix.gif
No i didnt get 1869 with 450 :) i got it with 467 :) little misunderstanding ;)
now im holding my E8600 in my hands, Q820A627 , 1.26V MAX? thought it was 1.25 :)
as it seems lower number batches performs best, below 600, hmmm welll sooin i know , i usually have bad luck, so maybe not this time?
BBL :)
Yeah boooy! :D looking good so far for me! :)
its a vid 1.25, but that doesnt mean anything anymore it seems, now priming 1.37v 4.5GHZ HELL YEAH! :D
maybe i can get it lower, be back with screens and stuff :P now im happy, maybe im lucky for once?
cheers!
Would you pls put your bios settings here or in the P5E3-Premium thread? Or PM me the settings?
O wait, we could also share profiles ofcourse? Shall I PM you my e-mailadres?