love the raptor mod mate looks great
this build is going to be epic!
Printable View
love the raptor mod mate looks great
this build is going to be epic!
Nice pictures...... ;)
How you going to cool the raptors???? My Raptor in that position was in 47ºC without any cooler. But then I put a cooler and the temperature down to 35ºC....
The raptors are a very very hot HDD.
47C is not anything to worry about. It's fluctuations in temp that kill HDDs. The air coming of the central rad and the fan above the chamber will provide plenty of cooling there.
FlyingA2 provided plenty of "real" hardware...and that will be coming along presently. If you check the first page you will see a mountain of gear that goes in here...
But no sense in breaking out anything until I have gotten the loops sorted a bit more. I want to get the reservoirs going first.
Awesome CD!!Quote:
Originally Posted by CyberDruid
It's fun listening to you think out loud... :p: :rofl::rofl::ROTF::D
Keep the funny videos comin!!
NEXT UP!!! CD Dancin Disco while Spray Painting a Case! :ROTF: :D
Keep up the good work man! :up:
More likely a ritual sacrifice on a New Moon...^^
Thanks ;)
You should mod the sunbeam rheobus in to the stock drive covers and stealth the cd drive.
Dunno why, buy they way they sit farther back than the stock covers kinda erked me. :p:
That's a good point. As it is I have the SnnBeam about 1/4" further back than the adjacent drive so the door will close...the stock mesh bay cover would hide that and also dim those BRIGHT LEDs. I'll give it a try.
looks good CD, like to see your next photos. I've tried to mod my Antec 900 but my wife always roles her eyes at me until i'm done so she can look at facebook and check her damn emails.
"There's a lot of stuff going into this case"
For some reason it made me laugh when you said that, almost as if it just hit you what you are actually stuffing in there.
Love the raptor mount. I don't remember from the beginning threads, but is he tossing in a couple storage hdd's in there? If so where are you mounting them?
There's one Storage drive in there...mounted in the optical bay above a fan.
Nice job on the RC-1000 there.
I've been working on one of my Cosmos cases as well, its still WIP stage ATM, as I'm awaiting parts.
Been toying with where to place a triple and a double rad, so seeing this has helped with ideas.
BigDK
is there a worklog somewhere?
I did start to do a log, and typed up all the detail, and then lovely FireFox/Vista 64 combo decided to hang again so I lost the lot, I then just cracked on with it. Being Mr Impatient, I didn't take any photos until I got to stage in photo in sig.
Have just started a work log from here in, as there is plenty to go until it's all finished, and from here in its going to have to slow down a bit (parts on order etc...)
Just started now
BTW not trying to hijack here:)
http://www.xtremesystems.org/forums/...d.php?t=187018
Quote:
Originally Posted by \Karting_freak
http://img258.imageshack.us/img258/3...sres053aw8.jpg
Started the reservoir by making some templates from 1/4" birch ply. This is the front part of the rack.
http://img404.imageshack.us/img404/2...sres054dr6.jpg
Three 1-3/4" cylinders will rest in the niches.
http://img168.imageshack.us/img168/5...sres052ib7.jpg
To give some perspective.
http://img186.imageshack.us/img186/9...sres055wv8.jpg
http://img185.imageshack.us/img185/4...sres060eq2.jpg
The back part will be fused to the cylinders and ported for inlet/outlet.
http://img341.imageshack.us/img341/1...sres062wb1.jpg
To get a better/thicker template I wanted to route the part out of 1/4" acrylic first. I bond the acrylic to the ply using a strong tape adhesive from 3M.
http://img404.imageshack.us/img404/4...sres063px1.jpg
I used the bandsaw to rough out most of the material to keep the router fropm grabbing.
http://img80.imageshack.us/img80/555...sres065ii8.jpg
Routing acrylic is a serious mess...
http://img404.imageshack.us/img404/7...sres069kz5.jpg
I then used my doubled templates to make the parts from 1/2" acrylic.
http://img80.imageshack.us/img80/551...sres070wi1.jpg
Here is how they rest on the top rails.
http://img404.imageshack.us/img404/4...sres072qv0.jpg
I cut the tubes to an appropriate length and tape them in place to have a look.
http://img185.imageshack.us/img185/3...sres073us4.jpg
http://img80.imageshack.us/img80/969...sres074va0.jpg
I canted the center one upward to give it some attitude...
http://img229.imageshack.us/img229/8...sres076bd0.jpg
http://img393.imageshack.us/img393/6...sres077lo8.jpg
I'll port the back plate and glue in a divider and hand sand the tubes to the exact bevel...which is just a few degrees. It would have beeneasier to have all the tubes the same angle but anybody could do it that way...
http://img80.imageshack.us/img80/421...sres078rd3.jpg
http://img80.imageshack.us/img80/639...sres079il3.jpg
These ends get 1/2 spheres of acrylic fused to them. First I will counterbore a flat and then drill and tap the 1/2 spheres for G-1/4 plugs--the acrylic ones that accept a 5mm LED...
http://img229.imageshack.us/img229/7...sres081wq7.jpg
So 6 tubes will come up and mate to barbs here. This way the res unit can be tilted upright to fill or even downward to drain.
http://img80.imageshack.us/img80/289...sres084vl6.jpg
I might change the profile of the rack..I have plenty of material and something might occur to me as I sit on my duff pimping out my modz...
:rolleyes: Hijack that :D
beastly!
The tube I got is really something...true .25" wall on it and optical clarity...certainly worth the high dollar. Drilling and tapping the 1/2 spheres is going to be tricky...I got extras...
Well played CD.
Now you've really got my attention. It's a bold move putting those cylinders up there and I'm fascinated to see how this is going to turn out. You've got a soufflé there that is going to go one of two ways visually... I think the key will be how the hoses connect and what you do to "finish" the look. If you find yourself adding more stuff to make it "work" then you know you're in trouble.
As Tim Gunn from Project Runway would say: "make it work". :)
wow..its like missiles ready to launch. ;-)
OH MY GOD
CD, you continually out do your self... I generally hate the look of reservoirs, but those just changed my mind!
They look wicked, and I think they go well with the roll cage.
It needs something. The parts that rest on the rail are what catch my eye in a bad way...they seem too round and obtrrusive. I can easily alter that shape and change it from convex to concave...or something.Quote:
Originally Posted by spotswood
Going to let that settle for the night.
Your work rules!
Now with that res you've placed the crown on top.
Really nice work, love the workshop BTW (green eyes)
Dude, AWESOME!!
Well done!, Those Res's look SXC =0
man that is so SICK!!!
great!