Printable View
I'll take a pic 2morow for ya....mateQuote:
Request:
hmm how about documenting with pictures said polishing and more polishing, i think i have i strain from reading "polishing" too much with out actually seeing the improvements.
There's actually such a lil improvement you would'nt even see it in the pics...
Alot of hard work = squat
I haven't been to Sydney....I haven't been out of queensland except for when i went to the Philippines when i was lil...Quote:
Sounds like nothing to show but perspiration until Mother's Billet arrives.
We could talk to Sazza about sydney harbour while we wait. lol Tis the only thing I really miss about sydney.
Ferry rides and skiff racing on the harbour amongst my fave memories. Although not at the same time. We capsized near Shark Island one afternoon and thought the Manly Ferry was going to go over us.
Yes i know i'm sad....I'm sick of Brisbane....Lol
Saving up to go for asia pacific tour next year... can't wait!!!
Never been in the Philippines. Sounds like a great place unless you're trying to buy WC. lol
from what i remember of it, it's ok....i was out in the proverance not in the actual city (manila)Quote:
Never been in the Philippines. Sounds like a great place unless you're trying to buy WC. lol
Grog is cheap... lol
Almost everything is cheap over there....
Accept electrical good's from what i remember (damn!)
probably go back sometime soon...My uncle has 3 house's over there...
Might ask him if i can borrow one (of course the one next to the beach)
sorry fellaz...
Haven't been able to post pic's because i can't find my camera...looked around the house all day..Rang up the mrs and she has it doh!!! I'll get it back 2morow and do a update...
I also got some goodies in the mail 2day included my new ram i got back from rma
cheers
UPDATE
ok i got my camera back.... took some pic's of my case how it is atm....:up:
http://img250.imageshack.us/img250/5366/nupc242md1.jpg
Added a mcr120 to the rear for my 3rd loop
http://img126.imageshack.us/img126/7364/nupc243rs7.jpg
3 acrylic bay reservoir's
http://img208.imageshack.us/img208/6979/nupc254cs8.jpg
i sanded and polished the middle divider to near mirror finish,i'm not finished with it yet waiting on some mother's billet polish in the mail (for a true mirror finish) this how it looks atm
http://img300.imageshack.us/img300/8740/nupc248kx0.jpg
As you can see it's mirror but i wasn't 100% satisfied (still cloudy)will how well it comes's up when the new polish arrives
http://img341.imageshack.us/img341/8935/nupc251mt2.jpg
Another full shot of case....
http://img63.imageshack.us/img63/2140/nupc258lg4.jpg
Bottom section has remained the same with the 2 triple rad's
http://img440.imageshack.us/img440/4201/nupc246vu1.jpg
Another shot of the middle section look at the middle section compared to the mobo tray...
http://img530.imageshack.us/img530/6843/nupc260th6.jpg
Last one's you can just see the palm tree's reflecting off the middle divider
http://img72.imageshack.us/img72/6086/nupc261sl3.jpg
That all for now.....
I'm still a fair way off from finishing waiting on an order from petra's and a order from ek i'm guessing 2 weeks until arrive...
In the time being i still i have to cut the mobo tray for cable management and finish cutting my side panels for the modder's mesh
cheers
all comments and suggestions are welcome
fam
See what you mean about the polishing. That molex and wires reflection is pretty good but just that bit of cloudy tinge over it.
That last shot of the rads really fooled your camera's auto settings. lol
You should have your Petra's things pretty quick but the other may drag on a bit. I hate the waiting.
It's funny comparing them. I find Petra's arrive in the time it takes PerfPC to dispatch. lol
Looks very impressive. Me likey :)
Yeah that's why i wasn't 100% happy with the polishing job...see how the billet polish work's when it arrive's i may need to sand again if still cloudy...Quote:
See what you mean about the polishing. That molex and wires reflection is pretty good but just that bit of cloudy tinge over it.
That last shot of the rads really fooled your camera's auto settings. lol
You should have your Petra's things pretty quick but the other may drag on a bit. I hate the waiting.
It's funny comparing them. I find Petra's arrive in the time it takes PerfPC to dispatch. lol
My camera ain't the best only cost 100bucks last yr...I took everyone's advice this time and actually took the pic's in natural light...
As for the postage time Aslong as i get my gear before the end of the month i'm happy...
Give's me time to get my panels and case done....
cheers jedda
thank youQuote:
Looks very impressive. Me likey
Very impressived..... i-d like to see finished :d please post more photosªªª
ThanksQuote:
Very impressived..... i-d like to see finished :d please post more photosªªª
Will post more pic's as the build continues probably tomorow
The blue sleeving you've used on those ugly multi-colour multi-strand stuff Lian Li use off the front fittings will continue to unravel it's weave unless you heat shrink that end. Jaycar have blue in a size that will slip over the end fittings in blue or black.
wow! looking good
thanks jedda can you link me to it please...Quote:
The blue sleeving you've used on those ugly multi-colour multi-strand stuff Lian Li use off the front fittings will continue to unravel it's weave unless you heat shrink that end. Jaycar have blue in a size that will slip over the end fittings in blue or black.
thanks for the nice comments :)Quote:
wow! looking good
I ran into a problem today my dremel is acting up...
Taking it back tomorrow for a replacement it died when i was cutting into my panels....
More update's 2morow cheers
Can't give you a complete link because of how their site works but here is their site and in Browse Products you want Wire and Cable and in the second line Heatshrink-Blue.Quote:
Originally Posted by disruptfam
You can buy online or at a branch, Ipswich, Mermaid Beach, Underwood, Woolloongabah etc
cheers jedda
wow disrupt, another upgrade! looking nice!
lol cheers mateQuote:
wow disrupt, another upgrade! looking nice!
UPDATE
ok i'm back received my petra order yesterday...
pump top, pump
d-tek nozzle's
pt_nuke
etc etc
here's some more pic's
did a trial mount with my fuzion....
http://img99.imageshack.us/img99/1705/picture079th1.jpg
added ac ryan mesh that i painted black to the drive bays and next to the mobo
http://img148.imageshack.us/img148/79/picture077fl1.jpg
cut my panels.... still need to clean up the edges... trial fitting...added modder's mesh that i painted black
http://img522.imageshack.us/img522/2...ture083qf0.jpg
i got my mother's billet polish the other day,polished again but it's still coming out cloudy... i may sand again... it's huge pita or i might add mesh to mid section or even black acrylic...if i dont get the results im after
http://img507.imageshack.us/img507/5...ture080cr4.jpg
full shot of case as it is atm (with flash)
http://img147.imageshack.us/img147/6...ture085qg2.jpg
that's all for now
comment are welcome
cheers
Waitng on my block's from ek... then build will be fully underway...
Good progress! Keep the pics coming.
cheersQuote:
Good progress! Keep the pics coming.
Question guy's
I don't know if i cbf (excuse the language) sanding again....
I have a few option's i could try...
1# add more ac ryan mesh to mid section....
2# buy some black acrylic to add to the mid section...
3# buy a mirror for the mid section....
4# sand and polish again and hope for the best...
What do you guys rekon????