RESERVOIR development

Hello, got a question, is it better to have bigger or smaller reservoir?

Got an idea in my head when i red about t-line ress.
Mind, my paint skill aint much uber...

ITs a new bottom for the ress wich is kinda like a t-line. instead of the normal opening wich covers almost half the pipe its just a small slot in the pipe. I dont know if my theory is correct but since its just a narrow slot it shouldnt affect flow any significant but since the slot is much longer than in a normal t-line it should bleed easier...?
all u need is a new bottom to the already exsiting ress :)

Quote:

---

Originally Posted by Eddy_EK

Update!

We made some simulation test and found a excelent solution for the DDC top RES option.

One picture is attached here.
The trajectoryes shows a speed of water.
Which shows the water path and thet there will be no air bubble sucking here ;)
The most important part is the insert into the reservoir on to the DDC top. Looks like Anti-Cyclon bit it has different features.

---

Very interesting, eddy.
I'd buy one out of pure curiosity.
Have you looked at how strong the pump roof remains? We've had suggestions that over-tightening DDC after market tops possibly causes probs.
When a rebate is machined into the top's top how thick a layer remains as pump roof and how strong/flutter resistant is it?

Quote:

---

Originally Posted by Jedda

Very interesting, eddy.
I'd buy one out of pure curiosity.
Have you looked at how strong the pump roof remains? We've had suggestions that over-tightening DDC after market tops possibly causes probs.
When a rebate is machined into the top's top how thick a layer remains as pump roof and how strong/flutter resistant is it?

---

Hi!

The POM Acetal or Delrin is very durable material and we will use that material for a start.
And I am aware of the aftermarket tops. Our top has internal measures exast as the original we have designed a better outgoing and inlet conditions.
So there should be no problem with thickness of the top.

Quote:

---

Originally Posted by Eddy_EK

Hi!

The POM Acetal or Delrin is very durable material and we will use that material for a start.
And I am aware of the aftermarket tops. Our top has internal measures exast as the original we have designed a better outgoing and inlet conditions.
So there should be no problem with thickness of the top.

---

:up:
Look forward to checking it out.

can i mount the EK-DDC X-RES 100 with the reservoir holders for the multi option reservoirs?

dang... i just received my EK 100 reservoir... nice and cute and love the build...

one complaint tho... thems cheapo holding clips likes to fling in diff directions...

already lost 2 arms...

I really like this top/res, but as I already got a Petra's tech tp[ on my pump with EK MULTI 200 RES will I lose/gain performance?

Spec in sig.

Thanks for your info.