SPI 1M 8.843s by NewBeetle (Team Japan)

Printable View

Show 100 post(s) from this thread on one page

07-28-2007, 12:42 AM
Hyperr

Congratulations on breaking 9 minutes! :clap: :clap: :clap:
Amazing... :eek:
07-28-2007, 01:06 AM
ent

:eek2:
NewBeetle you have just dominated the whole SPi world! This sub-9m run will be remembered for a long time! Congratulations!

I think that with new board you can also improve other records! (like 16M for example :D), am I right? :D
07-28-2007, 01:30 AM
NewBeetle

Many thanks all and always!!! :toast: :toast: :toast:

Quote:

Originally Posted by dinos22

:fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :party3: :party: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer:

I will not forget your congratulations through my life. :D

Quote:

Originally Posted by filmbot

NewBeetle, may I ask why you use two different P5K's?

Congrats on the record! :up:

@x9 ratio, my P5K is a little stabler than my P5K-E.
But @x10, my P5K-E is a little stabler than my P5K. :p:

Quote:

Originally Posted by Zannema

Congratulation, you have break 9m in 32M, i try this wednesday.
Very impressive Newbeetle:clap:

Good luck, Zannema-san! :up:

Quote:

Originally Posted by JMKS

No, no, not "as always" - much better :D. You're still amazing us :).
Where is the limit, 6GHz or more? ;)

And what about that Level 7? Was there some higher V needed or so? On other Pi it should help also I suppose.
With vanilla it was no chance of doing that? Because when I asked about it - http://www.xtremesystems.org/forums/...&postcount=177 - the answers was not optimistic ;).

What now? Sub4 16M? ;)

Congratulations again! :clap:

How to improve "performance level" is the setting of "CPU PLL Voltage" in my system (CPU#7 & P5K-E).
Only setting it to "AUTO", the level "7" can work. :eek:
It was a blind point for me.
And I think my vanilla can work Lebel "7" if it is the same setting as P5K-E.

DEWA DEWA ～
NewBeetle
07-28-2007, 01:51 AM
Timbosan

Quote:

Originally Posted by NewBeetle

At last I got sub-9m & just-9m! :up:
DEWA DEWA ～
NewBeetle

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
:shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked::rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :toast: :toast: :toast: :toast: :toast: :toast: :toast: :toast:

Awesome!:up:
07-28-2007, 02:09 AM
qballe

:shocked: :shocked: :shocked:
another spi milestone broken ...
amazing clock and result NewBeetle :clap: :clap: :clap:
;)
07-28-2007, 05:40 AM
k|ngp|n

Holy superpi LN2 ownage NEWBEETLE!!!!!!! :clap: :clap:
07-28-2007, 05:48 AM
Gautam

Quote:

Originally Posted by G H Z

Bravo :clap:

The bar has been set very high friends, who is up to the challenge? :D

God himself??? :eek:

:worship:
07-28-2007, 05:53 AM
chester

whoah jst got wrong mb p35,but then again can,t give it constant supply of ln2 either.Very impressive gj thx
07-28-2007, 06:17 AM
nachthymnen

Wow!:eek:
Under 9 Minutes in 32M it's incredible!:clap:
07-28-2007, 06:24 AM
NewBeetle

Thank you all !!! :toast: :toast: :toast:

Quote:

Originally Posted by Timbosan

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
:shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked::rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :toast: :toast: :toast: :toast: :toast: :toast: :toast: :toast:

Awesome!:up:

Thank you for your wonderful congratulations! :D

Quote:

Originally Posted by k|ngp|n

Holy superpi LN2 ownage NEWBEETLE!!!!!!! :clap: :clap:

Thank you so much for your congratulations, k|ngp|n-san.
You celebrate and I am very happy now. :D

Quote:

Originally Posted by Gautam

God himself??? :eek:

:worship:

It is an awful word for me,Gautam-san. :p:

Again, thank you so much, massman-san, erwinz-san, Hyperr-san, ent-san, qballe-san, chester-san, nachthymnen-san !!! :toast: :toast: :toast:

DEWA DEWA ～
NewBeetle
07-28-2007, 06:41 AM
M3kk

Congrats :).

How about 630 x 9 for pi32m?
07-28-2007, 06:50 AM
Fr3ak

Very impressive Mitsuaki-san!!!

Great achievement! :D :toast:

That CPU is a real killer. When will you start benching 3D? :)
07-28-2007, 07:37 AM
before

Very nice runs Newbeetle-san ;) I'd love to play with such a great CPU...

Congrats :toast:
07-28-2007, 08:51 AM
bachus_anonym

It only took you 6 weeks, now didn't IT :)

After 1M, that was another wall that simply gave in to you, tired of all that restless smashing, NewBeetle :up:
Huge congrats :toast:
07-28-2007, 09:54 AM
over@locker886

I was sure, you will be first person, who can run under 9 min. :up:

Great cpu, and greater master! Congratulations!:toast:

Now, you must go :party: :cool:
07-28-2007, 02:38 PM
rick_fx

Team Japan is the true SPI king! :up: :yepp:
07-28-2007, 03:08 PM
NewBeetle

Many thanks all!!! :toast:

Quote:

Originally Posted by M3kk

Congrats :).

How about 630 x 9 for pi32m?

At present, it is difficult. :(
However, I do not think it is impossible. ;)

Quote:

Originally Posted by Fr3ak

Very impressive Mitsuaki-san!!!

Great achievement! :D :toast:

That CPU is a real killer. When will you start benching 3D? :)

I did 3D bench only once with 7900GTO-SLI.
However, I did not continue because it cost too much. :(
I want to try again if there is a good sponsor. :p:

Quote:

Originally Posted by before

Very nice runs Newbeetle-san ;) I'd love to play with such a great CPU...

Congrats :toast:

Thank you so much for your congratulations always, before-san :)
I know you are one of the greatest pi bencher in the world.;)
I wish the goddess of OC to bring you a great CPU like your FX-57(San Diego) again. :up:

Quote:

Originally Posted by bachus_anonym

It only took you 6 weeks, now didn't IT :)

After 1M, that was another wall that simply gave in to you, tired of all that restless smashing, NewBeetle :up:
Huge congrats :toast:

Thank you so much for your encouragement. ;)
However, I want to take the rest only a little now. :p:

Quote:

Originally Posted by over@locker886

I was sure, you will be first person, who can run under 9 min. :up:

Great cpu, and greater master! Congratulations!:toast:

Now, you must go :party: :cool:

Thank you always, over-san.
This result is a favor of this great cpu. :D
I make an effort to demonstrate the ability of this chip. ;)

Again at the end, thank you so much, M3kk-san, Fr3ak-san, before-san, bachus_anonym-san, over@locker886-san, and rick_fx-san :toast:

DEWA DEWA ～
NewBeetle
07-28-2007, 04:21 PM
Mad1723

I'm sure you'll be the first to break the 8 sec barrier with the 45nm Wolfdales :D 6GHz for the 45nm anyone? :D
07-29-2007, 11:19 PM
NewBeetle

Quote:

Originally Posted by Mad1723

I'm sure you'll be the first to break the 8 sec barrier with the 45nm Wolfdales :D 6GHz for the 45nm anyone? :D

Thank you for your comment. :D
I wish I can do it by ..middle range.. CPU. :p:

Quote:

Originally Posted by NewBeetle

I will report on the image ,the spec, and the feature of my 4 Pots as early as possible.
Please wait for a while. ;)

Quote:

Originally Posted by dinos22

this is a very interesting design indeed
looking forward to hearing from you regarding this.....i'm in no rush :D

Here is the image of my 4CPU-Pots + 1Chipset-Pot.

http://homepage2.nifty.com/NewBeetle/Pot_4+1.jpg

From the left side : Maxx NEO, Kuri-Pro 2, Kuri-Pro 4, V-TEC ARC Pot Rev.12.0XE

　　　　　　　　　　　　　　　　　　　　　　　Center : Tara-chan 1st

1. Maxx NEO (90mm x 60mm x 120mm / 2050g) by TAM

For P4(Prescott,Cedar Mill)

Extra high-power CPU Pot, but it is difficult to treat and it awfully cools surrounding capacitors. :p:

2. Kuri-Pro 2 (60mm x 120mm / 1340g) by TAM

For Athlon XP(Barton), Athlon 64(Winchester,ClawHammer),Core2DUO(Merom), Pentium M(Dothan)

It's a basic model and the temperature management is easy. ;)

3.Kuri-Pro 4 (70mm x 150mm / 1650g) by TAM

For P4(Prescott,Cedar Mill), Core2DUO(Conroe)

It is easy to treat, gets cold well, and LN2 cost is good,too. :cool:

4.V-TEC ARC Pot Rev.12.0XE by Vigor

Only for Pentium M780 (I got pifast WR with this pot : 07-28-2005)

Special one of model made for me by Vigor. :up:

5.Tara-chan 1st (40mm x 60mm) by Kimuchi

For Chipset

It is the lethal weapon of chipset cooling. :D

DEWA DEWA ～
NewBeetle
07-29-2007, 11:28 PM
blind_ripper

:shocked: lots off copper over there .
btw newbeetle what dose dewa meen ? :D
07-29-2007, 11:38 PM
Solarfall

the Tara-chan 1st.. looks really cute ;) thanks for posting the pic of your containers they are awesome :up:..

and like blind_ripper i would like yo know too what does dewa dewa mean..
07-29-2007, 11:53 PM
NewBeetle

Hi, blind_ripper-san, Solarfall-san :)

Quote:

Originally Posted by blind_ripper

:shocked: lots off copper over there .
btw newbeetle what dose dewa meen ? :D

Quote:

Originally Posted by Solarfall

the Tara-chan 1st.. looks really cute ;) thanks for posting the pic of your containers they are awesome :up:..

and like blind_ripper i would like yo know too what does dewa dewa mean..

It is a greeting of japanese overclockers.
It means "Best regards" in English. :D
07-30-2007, 12:31 AM
massman

Impressive container round-up ...

Newbeetle, how much helps the watercooled Northbridge and southbridge to get te overclock stable? Is it just a matter of 1-2mhz higher than with aircooling or am I wrong here?
07-30-2007, 01:03 AM
NewBeetle

Quote:

Originally Posted by massman

Impressive container round-up ...

Newbeetle, how much helps the watercooled Northbridge and southbridge to get te overclock stable? Is it just a matter of 1-2mhz higher than with aircooling or am I wrong here?

The advantage of watercooled might be about 2-5MHz. :p:
However, watercooled might be considerably advantageous if becoming long distance like 32M.
For me the maximum advantage of watercooled is not to cause the flow of air.
The flow of air should be a little because it makes frost and dew on the board. :(
Therefore, FAN is used to cool the memory by a minimum amount of the wind. :cool:

DEWA DEWA ～
NewBeetle
07-30-2007, 01:29 AM
1Day

Thank you for the images and explanations of the POTS, your comments about airflow are very informative too. Again your generous spirit with information and help is greatly appreciated. May you go from strength to strength.

Show 100 post(s) from this thread on one page