hmm, mine were 0023 and 0025, wonder if it means anything?Quote:
Originally Posted by bobmanfoo
now i REALLY want to know how yours do... caus mine should do similar. :toast:
Printable View
hmm, mine were 0023 and 0025, wonder if it means anything?Quote:
Originally Posted by bobmanfoo
now i REALLY want to know how yours do... caus mine should do similar. :toast:
Quote:
Originally Posted by Unseen
i tried that once, i got a very polite "no."
damn at 250 i get errors :(
doing 200mhz fine at 3.25-3.33v, kinda dissapointed with the ddr booster, will report back
upped the ddr booster to give 3.32-3.39v doing 225mhz....
edit:
225 errored out, switched the rams in each slot, doing 235mhz, testing 240mhz
Twinmos SP 44D 2x512mb... 3.3v gives me 257Mhz (in Dual Channel of course) :thumbsup:
http://www.frags4fun.com/modules/For...les/carrot.gifhttp://www.frags4fun.com/modules/For...les/carrot.gifhttp://www.frags4fun.com/modules/For...les/carrot.gifhttp://www.frags4fun.com/modules/For...les/carrot.gif
Now I guess I'll just let them burn in a few nights
garrett what system ?
people please write in sig what's your system!!!!!
Garrett,Quote:
Originally Posted by Garrett
would you mind posting in this thread (VX/UTT Voltage Scaling, please contribute... ) please?
Great memory you got there! :toast:
MSI K8N Neo2 Platinum 0412 with bios 1.4 (official)
AMD Athlon64 3500+ Newcastle @ 10x257@ 1.6v for now... mem won't go higher @ 3.3v yet... ;)
Twinmos Speed Premium week 48 2x512 @ DDR514 2-2-2-5
OCZ Powerstream 520W adjustable PSU
put that link in your sig, so i can find it in a week or so. :DQuote:
Originally Posted by Rabbi_NZ
Done :)Quote:
Originally Posted by pik-ard v1.1
thanks, i'll contribute as soon as a i can (1st half of february, most likely).
finally got my stuff :)
right now i have 6x 512mb lying here,
4x for myself, 2x for a roommate
will test 'm all tomorrow and post results here :)
good night
i assume its the AA4T?
ah, upgrading both your computers from 512kb -> 1gb?
watcha gonna do with 1gb of BH-5?
all AA4T 04484 44DQuote:
Originally Posted by pik-ard v1.1
yes both pc will have a gig :)
cheapest gb i've ever bought ;)
and the bh-5 will be sold.
the bh-5 from the p4 isnt really tested yet,
3,2V vdimm and no vtt tracking doesnt really help with oc-ing the bh-5.
Gonna test it in the neo2 and gonna sell it then
btw pik-ard nice rig youre building there :toast:
yea, i never thought i would get away with 1gb of GOOD ram for under $200...
thanks, im just trying to get the best i can for what money i can afford to spend on it.
Anyone know were to get this UTT in the states yet ? I allready sold my pervious sticks of Twinmos sticks allready and am ready for another gamble. :banana4:
Quote:
Originally Posted by Klisp
A couple of guys have gotten them from newegg on their last two shipments. :toast:
mtec 50D chips here.
230 2-2-5 1h30m #5 memtest stable @ 3.3v will try for a lower vdimm tomorrow
240 gives me a lot of errors, even at 3.4v!
tonight i will be burning in at 3.3v
yea, noones said anything about getting aadt on the last few shipments. it's probably safe now to order from newegg.Quote:
Originally Posted by sparkie34
i think people like you, klisp, flushed out the "bad" ram from the system. :toast:
The MTEC UTT chips seem to be consistantly worse...Quote:
Originally Posted by Da_BoKa
If its not too much trouble...what's the date on those M.tec 50D ICs? New or older? If older, then those might be some relabeled ch-5 instead of the UTTs.
Quote:
Originally Posted by Rabbi_NZ
There are M.tec 50Ds and there are some 60Ds. In the 60Ds there are some that have, in addition to the normal date codes ending in 4, an additional "-50" following the date (afte a little spacing). These with the "-50" seem to do a little better than the others.
Edit: a couple of the guys here reported hitting 265-270 with these "-50" variety and as I've previously mentioned, Diablo23RD over at OCF hit 255 with his (2x512 OCZ PC2700 Value Series Ram) on a 3.2 P4. I think that add'l coding means something...but what?
Alonso, if you see this...is there anything to that additional coding on the M.tec chips which comes after the date?
those are 0448 chips!Quote:
Originally Posted by Reefa_Madness
seem to be hitting a wall at 235mhz, 240 errors out even with 3.5-3.58v, i tried both sticks seperately and they still error out at 240, its strange because this is the exact same wall i hit with 2x512 mushkin l2v2 tccd, help anyone?
Clearly UTT chips, no doubt about it.Quote:
Originally Posted by Da_BoKa
bobmanfoo,
"seem to be hitting a wall at 235mhz, 240 errors out even with 3.5-3.58v, i tried both sticks seperately and they still error out at 240, its strange because this is the exact same wall i hit with 2x512 mushkin l2v2 tccd, help anyone? "
Yours are the week 51 right?
Any chance your cpu or mobo is what's limiting you, since you hit that same wall with the TCCD?