its worth a shot.
i was benching today at 270x9 and max i got in 2k1 was 23756. i cant even get that stable with 1.78v :(
any hints for me? also i think i should get some TCCD so i can run tighter timings on dividers
Printable View
its worth a shot.
i was benching today at 270x9 and max i got in 2k1 was 23756. i cant even get that stable with 1.78v :(
any hints for me? also i think i should get some TCCD so i can run tighter timings on dividers
The Link doesnt run.Quote:
Originally Posted by mackanz
Yes i have a x800vivo@xtpe 520/560 ...
With a NC i need 2550-2600MHz for that achievement ...
In Sandra i have 4150MB/s!
you will get good unbuffered scores with 2-2-2
well guys i got good news and bad news.. the good news the DTR3400 still ives!! the bad news i think the DFI is the looser here? no mater what i do i cant get any post codes nothing even with the cpu out the memory out the video card out i get no beeps nothing its dead :(
oh well ill have my fx-53 here real soon i think i may just sell the DTR3400 back to ted and move on. has there been any release info on DFI's 939 version of this mb?? otherwise i may wind up holding on to this 754 platform til i can find a good mb for the fx chip. anyways im out of the game for now. back to my trusty ole intel for the time being...
peace perc,
I upgraded it a little this morning. Damn car low bug.Quote:
Originally Posted by Mrki
http://service.futuremark.com/compare?2k1=8202047
nice score and nice BH-5 :DQuote:
Originally Posted by mackanz
Not stable though. Passes 20 #5 memtest for the memory, but far from Prime stable. This cpu must be the worst CH in the history, only 2.3 stable on air and 1.7 volts.
Do you think this is stable enough for 24/7 settings...?... ;).. ;)
(air cooled)
Bummer about the mobo, but at least the "magic" chip's still kickin'. :) If tedinde doesn't want it back, let me know. ;) :DQuote:
Originally Posted by Perc
nay ideas how to improve my scores? its not stable with much tighter timings :( and my cpu is a dog. i think i need water for my gpu and phase for cpu
Here is some screens with CBI
I am going to try to get 2.4GHz today some how.
EDIT: I seriously give up. I will stay where I am because nothing else works! It really makes me mad though.
Without letting you sound stupid or something.
Have you connected the little 12 volt thing near cpu ?
cbi reports current temps of your cpu @ 255C lolQuote:
Originally Posted by ugp
as for me new highs all around :D
26,762 - http://service.futuremark.com/compare?2k1=8204747
http://www.fileshosts.com/AMD/DFI/60...-401_26762.jpg
I think it's the 18th fastest 9800Pro R350 on the ORB ?
http://www.fileshosts.com/AMD/DFI/60...rpi-1m_31s.jpg
http://www.fileshosts.com/AMD/DFI/60...superpi-8m.jpg
http://www.fileshosts.com/AMD/DFI/60...uperpi-16m.jpg
http://www.fileshosts.com/AMD/DFI/60...fast_44-70.jpg
http://www.fileshosts.com/AMD/DFI/60...0/mem-buff.jpg
ugp, if I were you, I'd pull the HSF and reseat it, a few times if necessary. Something's not right, and that seems most likely. I know we take it for granted we know how to do that right, but I've had bad contact before when I was sure it was right. ;) @eva2000, nice! :up:Quote:
Originally Posted by ugp
@eva
KHX3200K2/512 BH5 @272mhz 2226 1T rulls!!!
HSF?
and Ubermann were you talking to me?
Well - not impresive :DQuote:
Originally Posted by eva2000
It's mine:
http://members.lycos.co.uk/yotomecze...60%20small.jpg
well you're using 1x 256MB with what timings on DFI ? can you show your a64tweaker settings ? mines 2x 256MB so need looser timings at 2-2-2-6-8-12-2-2-1-2
also since memory bandwidth plays a part newcastle bandwidth is higher than clawhammer cpus clock for clock
3400+ newcastle memtest reports 1427MB/s at 200mhz 2-2-2-6
3700+ clawhammer memtest reports 1326MB/s at 200mhz 2-2-2-6
What is the actually HTT Record on this mobo ?
mine is 441 :D :
http://perso.wanadoo.fr/overcrash86/...0Gb/FSB441.JPG
over 2500Mhz the CPU was unstable then that the max her :
2527Mhz HTT 421
i will recive my 3400+ in one week then i'll test with 6X and more 420 of HTT to go over 2600Mhz :D
RespectQuote:
Originally Posted by overcrash86
How ?? :slobber:
I did max 335HTT
What cooling & bios ??
Quote:
Originally Posted by yotomeczek
no vmod just 2 FAN 80x80 on the chip stock cooling and 1.6v ,with more vchip that less better :D
BIOS MODED 10/15 moded 4v but my motherboard wasn't vmoded
A quick A64 noob question: I was wondering how to isolate the ram for testing with the A64? I just tried 4*275 1:1 and it memtested for quite a few hours, however when I carefully checked the bandwidth I realized that the test was moot since the bandwidth was abysmal.
thanks for your help!
4x multi doesnt work right.
use 5 minimum.
same with my board, with a modded zalman on the chipset, maxes out at 335 and windows at 325. my vdd is 1.7 maybe 1.6 is better?Quote:
Originally Posted by overcrash86
ugp wanna take off the IHS? you and me can both do it at the same time, maybe it will help
Quote:
Originally Posted by reject
yes ,the chip is too hot with more voltage, with 1.7v i go only at 436, at 1.8v 432 and 1.9v 421 :D
reduce the voltage to 1.6v to go up over 430Mhz ;)