New Memory Tweaker for Intel Chipsets

Quote:

---

Originally Posted by FELIX

=>donmarkoni: could you try with this version and tell me the result...
Otherwize, is this happen just after that you open cpu-tweaker or after a few minute?
When its happen, could you open the monitoring window for checking that all is correct too... thank.

---

It works. And not only that, I can't replicate results since first time I started new one. Now they both run side by side just fine. :shrug:
It used to happen in random time, but under a minute everytime for sure.
I forgot to mention, monitoring worked fine too.

New beta version: cpu-tweaker15b3.zip

-Replace the Average Temp graph by Highest Temp.
-Add a panel with time elapsed.

I managed to replicate error:

http://img217.imageshack.us/img217/8...aker2x15b2.jpg

Right - old 1.5b2, Left - new 1.5b2

You're working fast. :) I'll DL 1.5b3 now.

I initialised some divisor in the beta3, let me know if the problem appear again...
Thank for your help. :)

Hi Felix, just curious why CAS is greyed with Memset 4.1 and core 2. Cool SW BTW.

Great apps Felix, I use it on my desktop...but I have a Dell T5400 workstation as a server, will the app work with a Intel 5400 chipset?? (memset or cpu tweaker)

I tried memset and it says it doesn't work with the supported chipset. (granted that was a few months ago)

=>some one: its not possible to change CAS under win on DDR2/DDR3.

=>jwright77: could you make a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr . I'll see if I can do something...

New beta version: CPU-Tweaker 1.5 beta4
-Improve reading frequency on all CPUs.

Quote:

---

Originally Posted by FELIX

=>some one: its not possible to change CAS under win on DDR2/DDR3.

---

Can I ask why? Sorry if I'm being a pain in the butt.

...because the change has no effect for some systems, or crash the pc for others.

The reason I asked was because it is possible for me to change CAS with software on a PM45 mobile chipset but now I understand it is problematic on some, maybe many systems and therefore disabled.

Thanks for the explanation, it makes sense now. :)

Quote:

---

Originally Posted by FELIX

=>jwright77: could you make a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr . I'll see if I can do something...

---

I sent an email to you Felix, thanks for the help!

Quote:

---

Originally Posted by FELIX

New beta version: CPU-Tweaker 1.5 beta4
-Improve reading frequency on all CPUs.

---

Never had any more DivBy0 problems with 1.5b4. :knocks_on_wood: Thanks! :up:

@Felix - I only get "NOT FOR THIS SYSTEM"
Dual X5355 Clovertowns

=>nobugging: could you make a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr .

Hey Felix, I noticed that I can`t change any timings when I boot my setup (Athlon II X4 630, Crosshair III Formula BIOS 1503, 2 x 2 GiByte) with tCAS=5, because the "Apply"-button is greyed out. I tried several dividers and versions (1.4b9 and 1.5b4), but only raising tCAS to 6 (or a higher value) helps. Is this a feature of AMD IMCs, the mainboard/chipset or a bug you can fix maybe? :)

Could you make a screen and a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr .

=>Hyperhorn: Use this version: CPU-Tweaker 1.5 (finale version).

I switched to a Phenom II X4 910, but with the new version it works perfectly. :clap:
...used the donation button @ tweakers.fr. :)

...Thank You very much! :)

I'm building a new pc for a friend of my brother's and the system consists of:

gigabyte GA-P55A-UD4P motherboard with p55 chipset
intel i7-860 cpu
8gb OCZ DDR3 1333/PC3-10666 (OCZ3P1333LV4GK)


Apparently there's a lot of performance gains to be had by manipulating the TRD/Performance level:

http://www.anandtech.com/show/2427/7

But i'm having difficulty a) finding out what the trd is set at in this system, and b) finding a way to adjust it.

I don't see an explicit TRD value in the bios, and cpu tweaker 1.5 and everest ultimate 5.3 both don't display any such value.
So the question becomes...how do i find out what the trd value is, and how do i change it?

CTR + F1 (I think) to show advanced bios options on Giga boards ;)

CTRL+F1 is for unhide "Spread Spectrum"only.
In BIOS:MB Intelligent Tweaker(M.I.T.) /Advanced Memory Settings /DRAM Timing Selectable (SPD) /Auto-Quick-Expert
Setting "Quick" allow Channel A+B together Timing Settings.
Setting "Expert" allow Channel A+B separatly Timing Settings

http://img268.imageshack.us/img268/3...2010132027.png

i tried the ctrl-f1 without any success

i've also tried cpu-z 1.54 - no luck

my bios settings are configured to "expert".....

apparently the "performance enhance" setting might affect trd values...but we have no way of knowing within the bios, we need cpu tweaker or some other software to confirm

Yes,"Performance Enhance"(Standard/Turbo/Extreme)affect this value.
Btw,you can play with this Virtual P55 BIOS (M.I.T)