Micron D9 GMH\GKX\JKH etc club

Printable View

Show 100 post(s) from this thread on one page

03-04-2009, 06:33 AM
simone18

what a pity. probably the gigabyte p45 extreme is ht best p45 board imo.
still waiting for the board to come back...clock it to death man ;)
03-04-2009, 06:37 AM
CryptiK

Quote:

Originally Posted by Mafio

yes, i have measured the real voltage with multimeter and that was the same as the voltage set in the bios. :)

edit: my ep45 is dead...main bios is corrupted and recovery procedure don't work...

Well thats very nice ram in that case. The only board i have used that has a real voltage = set voltage is my M2F. Nice to see gigabyte have the same thing I'm getting fed up with boards over/under shooting set voltages.

Pity it died, I hope your replacement goes well. Was the bios damaged in a flashing procedure or did it just die of its own accord?
03-04-2009, 06:40 AM
Mafio

Quote:

Originally Posted by simone18

what a pity. probably the gigabyte p45 extreme is ht best p45 board imo.
still waiting for the board to come back...clock it to death man ;)

i'm waiting for the express courier...
03-04-2009, 06:47 AM
Mafio

Quote:

Originally Posted by CryptiK

Well thats very nice ram in that case. The only board i have used that has a real voltage = set voltage is my M2F. Nice to see gigabyte have the same thing I'm getting fed up with boards over/under shooting set voltages.

Pity it died, I hope your replacement goes well. Was the bios damaged in a flashing procedure or did it just die of its own accord?

i bought another one, the RMA procedure is too long... :D
the new mobo will arrive tomorrow

died before overclock...
03-04-2009, 07:45 AM
simone18

just a question: to reach high freq (doesn't mean cas latency, but obviously is cas5 or more) which of these is better?
kit pc9200/higher with gkx or pc8500/9200 with gmh?
03-04-2009, 07:53 AM
Mafio

Quote:

Originally Posted by simone18

just a question: to reach high freq (doesn't mean cas latency, but obviously is cas5 or more) which of these is better?
kit pc9200/higher with gkx or pc8500/9200 with gmh?

if i remember correctly the highest frequency with ddr2 is reached with teamgroup pc10400 (gkx)
03-04-2009, 08:09 AM
simone18

dunno why, but i've no so much feeling with gkx...maybe the new ud3r could help...
03-04-2009, 08:22 AM
Mafio

Quote:

Originally Posted by simone18

dunno why, but i've no so much feeling with gkx...maybe the new ud3r could help...

but i've good feeling with all ram :D
03-04-2009, 08:27 AM
simone18

it's not you, it's your board :P
03-04-2009, 08:30 AM
Mafio

Quote:

Originally Posted by simone18

it's not you, it's your board :P

your ud3r probably is better than my extreme :up:
03-04-2009, 08:36 AM
simone18

at high freq i think it all depends on how good are ram instead of board :)
03-04-2009, 11:20 AM
Ch@pS

http://img165.imageshack.us/img165/1875/10433.jpg

Managed this with my Team Xtreem D9GMH, any suggestions to get them over 11k read? Its what I'm aiming for.
03-04-2009, 11:51 AM
Mafio

set cas5 and increase the fsb :yepp:

edit: 1300 cas4 with what vdim???
03-04-2009, 12:22 PM
[XC] Oj101

3 char
03-04-2009, 12:34 PM
okorop

Quote:

Originally Posted by Mafio

set cas5 and increase the fsb :yepp:

edit: 1300 cas4 with what vdim???

I agree with you...those ram promise a lot :)
03-04-2009, 12:57 PM
zsamz_

Quote:

Originally Posted by Ch@pS

Managed this with my Team Xtreem D9GMH, any suggestions to get them over 11k read? Its what I'm aiming for.

i need high fsb for 11k
i can do it around 508fsb you will need around 520-530 on p45
03-04-2009, 01:20 PM
simone18

Quote:

any suggestions to get them over 11k read?

which is your kit? pc10400? on which board? let me know i'm really curious.
to reach and overcome 11k read you have to increase fsb. at least 550+ ;)
i've done 11k with dfi p35 ut and ram 1200 cas4 with fsb 600 :D
03-04-2009, 01:27 PM
[XC] Oj101

PC6400C4/P5Q-Dlx AFAIK
03-04-2009, 01:31 PM
simone18

Quote:

Originally Posted by Oj101

PC6400C4/P5Q-Dlx AFAIK

are you talking about ch@ps ram? :para:
03-04-2009, 02:16 PM
simone18

@chaps: 11K+ :D, cellshock pc8000 cas4
http://forum.hwproject.net/imagehost...aeaf8ab096.jpg
03-04-2009, 06:31 PM
Shiranui Gen-An

Seems I scored again, testing my new Patriot 8500 5-5-5-9 D9GKX kit and it seems to only need 2.08V or so for 600MHz C5.
03-04-2009, 10:05 PM
Ch@pS

OJ0 was Right, Team Xtreem PC2-6400C4 on a P5Q Deluxe.

This set hates cas 5, cant even get 1300 5-5-5-5, but can do 1300 4-4-4-3 @ 2.66v.

Quote:

@chaps: 11K+ , cellshock pc8000 cas4

On a DFI P35. ;) Still, nice result.

Quote:

i need high fsb for 11k
i can do it around 508fsb you will need around 520-530 on p45

If i use higher FSB my bandwidth decreases, can only run PL9 at 550+. Will test over 500 PL8 later today and see where that takes me. :)
Anyone know if theres a bandwidth record for P45 chipsets?
03-04-2009, 10:10 PM
zsamz_

on dfi ut p35 i only need 505fsb to hit 11k;)
03-04-2009, 10:18 PM
[XC] Oj101

I have the exact same issue with my TXs. I've suicided 600MHz C3 but can't do 668MHz C5. These sticks are rated at C4 and that seems to be where they're happiest.
03-04-2009, 10:34 PM
Ch@pS

Funny enough, my sticks used to be able to do 1333 C5 when Goddy had them, @ 2.44v though. :(

Maybe its just the P5Q Deluxe i have that doesn't like my Rams.

Show 100 post(s) from this thread on one page