Printable View
Name GT posted some with higher bclk. Do you all think this board is very capable of higher bclk on air? I think I can manage 205 but I 'm having trouble getting stability in the range of 206 to 210 and 210 and above always seems to lock up. Lets see some max bclk screen shots.
I've not gotten over 210 personally, but that's likely not the board's fault. I've seen people talking about 860s that hit a wall around there without sub-zero cooling. Then again, I haven't tried with the new BIOS...so we'll see!
same here i got a wall wirh 4 cores @ 215
2 cores can go higher
on ud4p my wall was 201 lol
Haha...well hey, at least you're better off than you were. :)
duhhh the board dies after 4 days:ROTF:Quote:
Originally Posted by hokiealumnus
just started priming at 4ghz (200x20).
settings
1.4v vcore
1.35v vtt
PLL 1.8v
PCH 1.125v
DRAM 1.65v
DDR3 1600 8-8-8-24
so far a very mediocre chip :(
http://i26.photobucket.com/albums/c1...ition/i7OC.jpg
Nice! these socket 1156 processors shine at 3.6... I just wish they could do the same with 200Mhz to 400Mhz more.Quote:
Originally Posted by KURTZ
The two chips I've tested seem to prefer vtt in the 1.225v to 1.275v range. Going above 1.30v has never seemed to help.:shrug: and yet for others it seems that their chips really do respond to higher vtt.Quote:
Originally Posted by bt_medic04
4ghz failed P95 at those settings. seems the sweet spot for this processor is 3.8ghz @ 1.35v vcore, 1.25v VTT. i can prime all day with those settings.Quote:
Originally Posted by PolRoger
agreed, i think that these chips need too many vTT over 3800mhz ... :rolleyes:Quote:
Originally Posted by bt_medic04
my chip is good for 4.0 1.38v 1.3v vtt
i'm stable @ 4.2 1.41v but it gets too hot priming
1.38 vCC & 1.30 vTT? try 1.35/1.35 ;)Quote:
Originally Posted by zsamz_
its safer with more v-core than vtt;)Quote:
Originally Posted by KURTZ
I love this little board.. feels like a bumper car & makes my E760 look like Tweek..
& the FTW is definitely faster than the GA-P55-UD6 which I had before the FTW.
Mem is G.Skill F3-17066CL8D-4GBPS
http://h.imagehost.org/0055/i7_860_E...FTW_20x210.png
Nice clocks Kurtz but good lordy that's some vcore ;)
thanks mate :)Quote:
Originally Posted by Vinas
Testing a new i5 with ~1.225 VID. Running "with out vdroop" so the board overvolts to ~1.376v load.
http://i695.photobucket.com/albums/v...095Mhzidle.png
Similar to my 860. 1.37v vcore and 1.35v VTT for 5 hours OCCT stability + a bunch of 3D runs. It can do more but I like the temps below 70C loaded.
Quote:
Originally Posted by zsamz_
I had hoped to break 30k in 06 with cf5870's but the 8x pci-e are holding the cards back I guess. Not a bad score at all but was able to get 27k+ on my 775 giga ud3p/4890 cf rig so not a big jump.
http://img20.imageshack.us/img20/8602/06bestrun.png
Does anyone know how many layers PCB of this board has?tia.
Just reveived this board ...
and got a foxconn socket :rolleyes:
Should I be dissapointed now ?