AMD 4Gz Air Cooling Club

Printable View

Show 100 post(s) from this thread on one page

09-02-2009, 12:05 PM
Lunait

Quote:

Originally Posted by WSP

Chew is running the same mobo with F3L bios ;)

Is that the best one available then?

I can only find the F5, F3M and F6 BIOSes (sp?) at the Gigabyte website:
http://www.gigabyte.com.tw/Support/M...ProductID=3005

EDIT: Found the F3L BIOS. Is it better than F5 then?

Also, I found a thread over at Extreme Overclocking, in which it was suggested to raise the PCIe bus from 100 to 110 MHz. How exactly would that help?

I guess I could play around with ACC a bit as well. Found a nice guide here.
09-02-2009, 12:55 PM
WSP

dont sure about raising PCIE clock, but I did that before to OC 9600GT, but not 110mhz. I raise it to 105mhz only.

I guess it helps OC graphic card, and not cpu

I believe chew has tried F5 bios but still running F3L so judging from his results, F3L is better that F5
09-02-2009, 01:15 PM
Lunait

I guess I could try the F3L BIOS as well then. What is it about the F3L that makes it better than F5 or other BIOSes? Also, do I have to reset my clock values etc. to default before flashing?

EDIT: Flashed to F3L now :) I'll try to raise the CPU clock to 203 and see if it works better this time.
09-02-2009, 03:19 PM
Lunait

System still reboots at 3.96 GHz, even with F3L BIOS. I guess all I've got left is to try ACC, or perhaps slim my Windows down a bit more. How exactly does ACC work? I mean, what processes make it work (I know how to set it up etc.)?
09-02-2009, 07:46 PM
ah_khoo

Quote:

Originally Posted by WSP

ah khoo--->nice m8 :up:
might be doing more great with those RAMs clocked higher and tighter timings, and higher NB freq too ;)

and, why is that your GFX running at x8 bandwidth instead of x16?

thx mate... :)

yup, i'll give it another run @ higher ram & nb freq. my ram can't really do tight timing, so d only way is to go high in Mhz. :)

d board is of 790gx chipset, i'm running cross fire setup so 8x each is normal, unless i switch to 790fx board. :D
09-03-2009, 01:33 PM
FlanK3r

little playing with 1.325V, maybe i can go higher :)

http://valid.canardpc.com/show_oc.php?id=689902

http://valid.canardpc.com/cache/screenshot/689902.png
09-03-2009, 01:50 PM
WSP

Quote:

Originally Posted by Lunait

System still reboots at 3.96 GHz, even with F3L BIOS. I guess all I've got left is to try ACC, or perhaps slim my Windows down a bit more. How exactly does ACC work? I mean, what processes make it work (I know how to set it up etc.)?

try 203mhz base clock with lower multiplier to bring cpu clockspeed down.
if that is fine, then your cpu is the culprit...

daveburt (I believe) post a thread about tuning ACC. he is using wprime as an example. minus value raise the core processing speed, while plus value lower the core processing speed.

the idea is to get all core running at the same speed (in wpime)

you might want to do a clean fresh install of windows too ;)

@FlanK3r....nice speed at that volt. seems like you got a high-leakage cpus.
is that bench-stable?
09-03-2009, 03:16 PM
Lunait

Quote:

Originally Posted by WSP

try 203mhz base clock with lower multiplier to bring cpu clockspeed down.
if that is fine, then your cpu is the culprit...

daveburt (I believe) post a thread about tuning ACC. he is using wprime as an example. minus value raise the core processing speed, while plus value lower the core processing speed.

the idea is to get all core running at the same speed (in wpime)

you might want to do a clean fresh install of windows too ;)

@FlanK3r....nice speed at that volt. seems like you got a high-leakage cpus.
is that bench-stable?

I'll try 203 MHz with 19x multiplier and see how it goes. I recently installed Windows (this computer is just a few weeks old) and I've pretty much removed all unnecessary features (although I still have a desktop background and some other elements).
09-04-2009, 01:40 PM
[XC] Synthetickiller

Quote:

Originally Posted by FlanK3r

little playing with 1.325V, maybe i can go higher :)

http://valid.canardpc.com/show_oc.php?id=689902

http://valid.canardpc.com/cache/screenshot/689902.png

This counts?

I got this OC & higher w/ a 945. I was hoping to hit 4ghz so I could post.

I didn't realize the rules were so lax.
09-05-2009, 09:48 AM
WSP

^^
No. that one doesnt count. You could look at the 1st page to see who's in.
and post some benchmark is required too.not just suicide clock :)
09-05-2009, 02:30 PM
ablech

since i was new @ xs it was so nice to meet all of u :yepp:

and finally i can join this club.. let me in m8 :D

http://img98.imageshack.us/img98/81/1652961.jpg

thanks :up:
09-06-2009, 09:00 AM
WSP

Nice one m8 :up:

what's your hardware setups?
09-06-2009, 09:23 AM
sandy

Quote:

Originally Posted by ablech

since i was new @ xs it was so nice to meet all of u :yepp:

and finally i can join this club.. let me in m8 :D

http://img98.imageshack.us/img98/81/1652961.jpg

thanks :up:

nice to see u bleh:up:
keep pushing dude:D
09-06-2009, 10:37 AM
ablech

Quote:

Originally Posted by WSP

Nice one m8 :up:

what's your hardware setups?

msi gd 70
x2 550 to x4 B50,, mine is :down: (bad chip i have)
patriot pc 1333:up:
wdc 80 gb
epsilon 600

Quote:

Originally Posted by sandy

nice to see u bleh:up:
keep pushing dude:D

well it was so nice for me to join this forum too...

thanks for ur support bro:up:
09-06-2009, 10:57 AM
sandy

Quote:

Originally Posted by ablech

well it was so nice for me to join this forum too...

thanks for ur support bro:up:

i think u need some xtreme cooling maybe LN2 to achieve higher clock:D
09-06-2009, 12:27 PM
FlanK3r

Quote:

Originally Posted by [XC] Synthetickiller

This counts?

I got this OC & higher w/ a 945. I was hoping to hit 4ghz so I could post.

I didn't realize the rules were so lax.

no, its only for interesting;). Some day il go with this CPU vcore at 3900 MHz +- and try 1.55V and 4300 MHz.
09-07-2009, 10:29 AM
WSP

Quote:

Originally Posted by ablech

msi gd 70
x2 550 to x4 B50,, mine is :down: (bad chip i have)
patriot pc 1333:up:
wdc 80 gb
epsilon 600

well it was so nice for me to join this forum too...

thanks for ur support bro:up:

and what cooler you use?
09-10-2009, 09:19 AM
FlanK3r

update me,now i have better result, it was easy :), il try more at sunday (and not only superpi 32M)

17m 35,186s

http://img401.imageshack.us/img401/9...mhz2828mhz.jpg
09-10-2009, 10:28 AM
ablech

Quote:

Originally Posted by sandy

i think u need some xtreme cooling maybe LN2 to achieve higher clock:D

would love to try it:D still need a lot thing to learn and prep to do..

Quote:

Originally Posted by WSP

and what cooler you use?

im using true 120 push pull:up:
09-11-2009, 01:54 PM
FlanK3r

new AIR validation :)

http://valid.canardpc.com/cache/screenshot/703891.png

http://valid.canardpc.com/cache/banner/703891.png
09-12-2009, 01:32 AM
sinar

Testing ES with 1.25 vcore

http://img197.imageshack.us/img197/8...eenshot438.jpg
09-12-2009, 03:08 AM
FlanK3r

whau, nice, Cinebench at 3800 Mhz and 1.25V....
09-12-2009, 05:50 AM
Tomasis

Quote:

Originally Posted by FlanK3r

whau, nice, Cinebench at 3800 Mhz and 1.25V....

strange twkr supposed to be high leakage chip :D
09-13-2009, 01:55 AM
FlanK3r

tomasis: what can this chip with 1.5V :)? Post some benches? Thx :)

I have next new validation
http://valid.canardpc.com/cache/banner/705946.png

http://valid.canardpc.com/cache/screenshot/705946.png
11-01-2009, 01:15 AM
Don_Corleone

Here is my result :
(i'll try to pass 4.4ghz soon)
Cooler : Modded Cooler Master V8
http://valid.canardpc.com/cache/screenshot/715016.png

http://valid.canardpc.com/show_oc.php?id=715016

Here is Phenom II X3 740 :
Cooler : Stock !!!!

http://valid.canardpc.com/cache/screenshot/798342.png

http://valid.canardpc.com/show_oc.php?id=798342

Show 100 post(s) from this thread on one page