Feser Monsta Pics

Printable View

Show 100 post(s) from this thread on one page

11-26-2008, 02:30 PM
zlojack

Quote:

Originally Posted by mstrmold

What part is? In a few months we'll be singing its merits unless a new PA series comes in and wipes the floor with this. I for one like the 4 port design. It allows for more customization of rad locations.

It's ridiculously huge.

I won't be singing it's merits as it's just plain too big for my tastes.

I have no issue with the design. I think the 4 port design is a good innovation.

But it's still ridiculous :D
11-26-2008, 02:33 PM
Sadasius

I am actually starting to get the wheels in motion again for something cool with this rad, or make that 3 of them and using them on the side of the case with a bracket that can put them all in sandwich mode...Hmmmmm Yes I am starting to like this idea and may just run with it. How much are these rads again? Also instead of the Carbon Panel sides I think I can come up with something much much better. Do those just bolt on or are they riveted?
11-26-2008, 02:43 PM
Arkangyl

hmm, bet you could use those 4 fittings as built-in T lines for use as fillports...

that thing is just silly-big though, be interesting to see how it performs
11-26-2008, 02:45 PM
jollyjoker

Looks too big. I wouldn't think it would perform that much better than a normal radiator. Would like to see it in action though.
11-26-2008, 04:42 PM
elpibe10

I like it. Looks really cool.
11-26-2008, 06:12 PM
DarthBeavis

Quote:

Originally Posted by zlojack

It's ridiculously huge.

I won't be singing it's merits as it's just plain too big for my tastes.

I have no issue with the design. I think the 4 port design is a good innovation.

But it's still ridiculous :D

I wish that is what she said, except the part about the ports.
11-26-2008, 07:08 PM
2low4u

This thing Is a monster for sure! But hey if it's less than to Feser's or TC's & you have the room for it why not? lol Make for an interestingly Xtreme build don't you think?

Quote:

Originally Posted by MrToad

Hmmm... as a figure of speech I suppose :p:

There were some flames over this subject before... hopefully the story won't repeat itself and we'll all be civilized :)

However, I do agree that ingenuity (and of course the competition that comes with it) is welcome. Not my cup of tea, but I'd also like to see some numbers... and what may come next :)

Why do you bring up old crap already talked about? Twice You did it in this thread when it wasn't needed in the least nor was it justified. Let the old discussions die in the flames of the old threads & leave it at that!

Thank you come again! /Apoo
11-26-2008, 09:37 PM
aspire.comptech

Quote:

Originally Posted by mstrmold

I for one like the 4 port design. It allows for more customization of rad locations.

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...

I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...
11-26-2008, 10:17 PM
DarthBeavis

Quote:

Originally Posted by aspire.comptech

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...

I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...

Custom cases ;) I could use that rad in a custom build rather easily using ports on both sides . . .think outside the box
11-26-2008, 10:30 PM
T_Flight

I could see somebody putting 4 or 5 of these in a Ascension with a pedestool. 2 on the CPU, 2 loops for dual GFX Cards, and one for the motherboard. Add another for Tri-SLI setups. :D You'd need dual fans and shrouds on each side of the radiator and shrouds. 2 PSU's to power it all, 4 or 5 RD 30's....ummmm....aw, and a Nuclear Reactor outside your house to power the complete system once it's built. :rofl:

Total Cost? 25,000 dollars. That's just for the cooling system. hahaha Now THAT is Xtreme. :D

I'm having a blast right now. :)
11-26-2008, 11:41 PM
HESmelaugh

T_Flight, I have a suggestion that fits with the level of extreme you proposed:
A separate loop cooling all the pumps in the other loops. :D

With another Monsta, why not?
11-27-2008, 12:31 AM
mstrmold

Quote:

Originally Posted by aspire.comptech

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...

I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...

See, your imagination is limited by the fact that all rads to date only have two ports. You must expand your horizons. Nothing says you have to mount it against a wall of a case, correct? You could also shroud one side and then use 90's to help with inlet routing. Much more possibilities... :D
11-27-2008, 01:02 AM
T_Flight

Quote:

Originally Posted by HESmelaugh

T_Flight, I have a suggestion that fits with the level of extreme you proposed:
A separate loop cooling all the pumps in the other loops. :D

With another Monsta, why not?

Cool.

BTW, if Feser comes out with a Nuclear Reactor I want credit. :)
11-27-2008, 02:08 AM
fusionmkx

It will be interesting to see how this will do against the 9x120mm radiators like the BlastFlow Extreme or the MagiCool XTREME NOVA 1080. Surface area exposed over density...
12-06-2008, 02:47 AM
ProtoTyper

wow. what a big thing. i think this 2 in/out G1/4 feature is the best ive ever seen long time. you can use thermo probes in the threads or even refill the rad, when it is mounted outside. you can check in and out temperature of the water when you have 2 probes installed. you can combine 2 monstas with a sli fitting or can make a big mega sandwich. wow. or two loops parallel. no limits. ups, limited to cases for sure. i doubt it will fit in lots of cases. but i guess it wasnt seem to be for use with standard cases.
12-09-2008, 09:45 AM
WaterFlex

FESER MONSTA IS IN STOCK !!! 200 EUROS!
12-09-2008, 09:55 AM
Polizei

Quote:

Originally Posted by WaterFlex

FESER MONSTA IS IN STOCK !!! 200 EUROS!

I see no price or availability date.
12-09-2008, 10:00 AM
Waterlogged

Quote:

Originally Posted by WaterFlex

FESER MONSTA IS IN STOCK !!! 200 EUROS!

Wonder if they got permission from Michael Buffer or if they stole it like everything else?:rolleyes:

I also find it quite amusing that they include 3/8" x 1/2" compression fittings with such a "huge" rad. :rofl:
12-09-2008, 10:07 AM
zlojack

Honestly...someone needs to explain to them that they have the dumbest website ever.

I'm waiting to see tests on this rad, but I still think it's ridiculous.
12-09-2008, 10:10 AM
WaterFlex

Quote:

Originally Posted by Polizei

I see no price or availability date.

You should register on website to see prices.
I`m sure, this rad is the best of the best.
12-09-2008, 10:32 AM
DarthBeavis

Quote:

Originally Posted by Waterlogged

Wonder if they got permission from Michael Buffer or if they stole it like everything else?:rolleyes:

I also find it quite amusing that they include 3/8" x 1/2" compression fittings with such a "huge" rad. :rofl:

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.
12-09-2008, 10:41 AM
D-Cyph3r

Quote:

Originally Posted by WaterFlex

FESER MONSTA IS IN STOCK !!! 200 EUROS!

Thanks for linking to the most ridiculously overly loud web page in history.
12-09-2008, 10:47 AM
zlojack

Quote:

Originally Posted by DarthBeavis

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

"Let's get ready to rumble!"

Is Michael Buffer and that's a recording of him.

Using it without his permission on their website would be the "stealing" in question, I believe.
12-09-2008, 10:49 AM
Waterlogged

Quote:

Originally Posted by DarthBeavis

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

Michael Buffer is a legend in the boxing and wrestling world and is very well known around the world.

As for proof, sadly it had to be cleansed from the site for legal reasons. On this topic, I will take Vincent at his word as well as my own eyes and personal knowledge on the subject. My "accusations" are my own personal opinion and do not reflect the opinion of anyone within management of, or XS itself.
12-09-2008, 10:57 AM
DarthBeavis

Quote:

Originally Posted by Waterlogged

Michael Buffer is a legend in the boxing and wrestling world and is very well known around the world.

As for proof, sadly it had to be cleansed from the site for legal reasons. On this topic, I will take Vincent at his word as well as my own eyes and personal knowledge on the subject. My "accusations" are my own personal opinion and do not reflect the opinion of anyone within management of, or XS itself.

I like Vincent and Mario . . .and I have probably more inside information from sources that deal with both of them but even that does not matter as I was not DIRECTLY involved so it would be really reaching to make a judgment . . .I am NOT saying you do not have a right to an opinion . . .but you are a RESPECTED person here (I respect you greatly) . . .it is below you to make such a comment. Can we please not lower the level of discourse here by making statements that drive off vendors? Look how far XS has some in the last two years . . . heck KOOLANCE has reps posting here . . . .be critical of products . . .that is useful.

As far as Buffer . . .you mean the announcer? Now I get it . . .Is Bruce Buffer his little brother or something (UFC accouncer)?
http://www.bufferzone.net/main.html

BTW: MMA > boxing ;) and professional wrestling = ghey

Show 100 post(s) from this thread on one page