http://www.xtremesystems.org/forums/...1&d=1186650802
Can I remove this resistor or use a wire to make contact ?
Printable View
http://www.xtremesystems.org/forums/...1&d=1186650802
Can I remove this resistor or use a wire to make contact ?
What are you talking about? This is not even a resistor. It's condensator...
And you don't remove it, you just make a few passes with a graphite pen/pencil...
No problem.
Just one thing to mention: if you pencil it hard you can get opposite of droop, for instance I have under load rise of voltage for about .012 when in bios set higher than 1.55V
Thanks very much GHZ and De5tr0yer
It's not very clear but you'll understand
http://www.max-save.org/pix/t01bhep.jpg
i have a p5k premium wifi/ap
and the max vcore is 1.7v is this correct??
I performanced the CPU Vdroop reducing pencil mod and now I've got my Q6600 @3.8Ghz! :D
God it needs a lot of voltage to get there... Going to try for 4.0Ghz next ;)