Brisbane Testing in progress...

Printable View

Show 100 post(s) from this thread on one page

12-15-2006, 04:02 PM
mofoman

Let's just get serious here for a minute!! K8 is never gonna do 4GHz, the architecture is not going to suddenly jump through hoops because it got a die shrink and that is not what the shrink is about.

This is about Advanced Micro Devices changing their manafacturing process to 65nm, and that now starts with k8, but that doesn't suddenly make the chip faster or better, sure we may see a couple of hundred mhz added, but nowhere near 4ghz.

Let's just hope the chips can hit 3.5, cause 3.5ghz k8chips in my Quad Fx???:banana::banana::banana::banana: yeah, I'll take that!
12-15-2006, 04:16 PM
Lightman

Quote:

Originally Posted by Fred_Pohl

LOL! This from the guy who posted FUD about 4.26GHz Brisbanes at 1.4V running 35C... :slap:

What is your new point? That this nonexistent 4.26GHz Brisbane that Intel is supposedly testing was actually running >50C load like others do at 3GHz because Core Temp doesn't read Brisbane's sensors correctly?

I quoted some other guy putting clear that this is UNCONFIRMED, FUD, ETC.
The reason I did that was to bring discussion back on topic (I mention this few posts back)! Read previous 20 or so posts! It's not that I believe in 4GHz K8, but some parts of that story make sense. I don't know how to put this more clear!
12-15-2006, 04:19 PM
BigJoe

GREATE WORK Nedjo.... You are pride of Belgrade :)
12-15-2006, 04:21 PM
mofoman

Quote:

Originally Posted by Lightman

I quoted some other guy putting clear that this is UNCONFIRMED, FUD, ETC.

LMAO :D , has to be the best sentence I have read in ages, got me laughing anyway.

I know what you are saying Lightman, it's just the way you had put things, simply because of your english.Not putting down your english cause I think it is amazingly good, it's just it can be hard to stress your point accross sometimes, I understand this and other people should give you a bit of give and take too.
12-15-2006, 04:34 PM
Lightman

Yes! Sometimes It's difficult to me write down what I want to tell. There is a major difference how you explain things and build sentences in my native language and English.

I will improve over time thanks to you guys! I'm learning every day from you :toast: .
12-15-2006, 04:53 PM
Absolute_0

A while ago i predicted AMD 65nm would scale up to 3.4 Ghz but would take over a year to do so. Still, this first batch doesn't look so good. This overclock is comparable to a good opty 170 no more.
12-15-2006, 05:10 PM
Fred_Pohl

Quote:

Originally Posted by Lightman

I quoted some other guy putting clear that this is UNCONFIRMED, FUD, ETC.
The reason I did that was to bring discussion back on topic (I mention this few posts back)! Read previous 20 or so posts! It's not that I believe in 4GHz K8, but some parts of that story make sense. I don't know how to put this more clear!

I apologize if I interpreted your previous posts too literally but I didn't know that English wasn't your native language and you were rather insulting to me a few posts back. Your profile location of "in car" could be anywhere. ;)
12-15-2006, 05:31 PM
Syn.

Quote:

Originally Posted by Fred_Pohl

Perhaps so but some things are so highly improbable as to be laughable. IMHO a Brisbane clocking to 4.26GHz @1.4V and running at 35C with a Sempron HSF is a great example. :)

Not if the Sem:banana::banana::banana::banana: HSF was 100% Copper monster with 8 heatpipes and 120mm fan spinning at 6,000 RPM :p:

Quote:

Originally Posted by BigJoe

GREATE WORK Nedjo.... You are pride of Belgrade :)

lol oces da kazes da srbin je dovatio brisbane brze nego ameri?
12-15-2006, 05:38 PM
gOJDO

Quote:

Originally Posted by Syn.

lol oces da kazes da srbin je dovatio brisbane brze nego ameri?

Naravno, Srbin je dovatio pre momci iz AMD :)
12-15-2006, 06:02 PM
Nedjo

:D
Srbin ih je dobio od AMD ;)
12-15-2006, 06:19 PM
Fred_Pohl

Quote:

Originally Posted by Syn.

Not if the Sem:banana::banana::banana::banana: HSF was 100% Copper monster with 8 heatpipes and 120mm fan spinning at 6,000 RPM :p:

I seriously doubt that any Brisbane could reach 4GHz even with 2V and that monster copper 'heatsink' filled with LN! :D
12-16-2006, 12:42 AM
Lightman

Quote:

Originally Posted by Fred_Pohl

I apologize if I interpreted your previous posts too literally but I didn't know that English wasn't your native language and you were rather insulting to me a few posts back. Your profile location of "in car" could be anywhere. ;)

I didn't want to insult you! Sorry if it sounded like that! And my location usually is in car across UK, sometimes europe :p: .

@Topic: Mayby Intel guys get their hands on ES of K8L with longer pipeline??
12-16-2006, 01:33 AM
cky2k6

that is probably a lot more likely the case, but i still think its fud. hopefully we'll see in a few moths when k8l es start floating around. k8l might actually be very impressive clock speed wise, if it has a longer pipeline, a matured 65nm process and some sige added to the mix. f3 revision 90nm, which likely has sige already from the way it seems to overclock, has given a few hundred mhz boost to socket f opterons.
12-16-2006, 03:07 AM
BigJoe

Quote:

lol oces da kazes da srbin je dovatio brisbane brze nego ameri?

OF COURSE

NAŠ NEĐO JE ČUDO :)
12-16-2006, 03:45 AM
breakfromyou

Quote:

Originally Posted by brentpresley

That thread is full of so much FUD it makes my head spin.

Guess we know where all the 14 yo's go to play. :p:

A reason to avoid that website. Its good for a few things. Having a bunch of noobs talk you down, and ATI Tool.

While watching the streaming video from AMD yesterday...I got too excited and actually drooled on myself :o

Why hasn't anybody mentioned that GPU thing they're doing in a few months? the external/internal graphics thing? I don't even have any idea what they're talking about. Thats good that AMD is focusing on the mobile market, but I want Barcelona! :(
12-16-2006, 02:42 PM
illidan

Quote:

Originally Posted by Nedjo

:D
Srbin ih je dobio od AMD ;)

:woot:

can u try what's cold bug limit :stick:
12-16-2006, 04:04 PM
Nedjo

not equiped for that sort of testing!
12-16-2006, 04:14 PM
XFxGeforced

Quote:

Originally Posted by Nedjo

not equiped for that sort of testing!

you ever think about investing in a water cooling setup just for kicks? :p:
12-16-2006, 04:52 PM
Marvin

i would love to see this cpu under a single stage.:p:
12-16-2006, 06:05 PM
XFxGeforced

Quote:

Originally Posted by Marvin

i would love to see this cpu under a single stage.:p:

feeling is mutual, why don't you get one then? ask Nedjo for his :p:
12-16-2006, 06:50 PM
Proday

And we all still w8ing for spi 1m test :(

Good job u do Nedjo; congrat.
02-01-2007, 10:26 PM
alpha754293

Quote:

Originally Posted by Nedjo

OK!
Here are Sandra results @ 3100 MHz
CPU
http://img221.imageshack.us/img221/2...0mhzkd3.th.jpg
MMedia:
http://img209.imageshack.us/img209/9...0mhzjq2.th.jpg
Memory:
http://img209.imageshack.us/img209/4...0mhzup0.th.jpg
Memory is working on 1033 MHz.

I don't suppose that you still have the processor to be able to run Sandra 2005 SR1 (the last known good revision of the program that yields good data)?

If you do, can I email you a copy of the program (zip/rar/tar.gz) and run it? I've been dying to find some data on it on the net and it looks like that you're the only one that's done a "full analysis" of it so far.

Thanks.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:52 PM.

XtremeSystems