Printable View
I found you can get just about anything you want when you threaten people. Not really :DQuote:
Originally Posted by arisythila
I look forward to your results. My 820 D depresses me. Here is the 'best' results my system can handle:
FSB 280, 3.92GHz
Everest Read: 8779
Everest Write: 5976
Everest Latency: 65.6
Sandra Buff: 7761/7800
Sandra Unbuff: 5057/4884
Super Pi: 32.797
PC Mark 05: 5020
3D Mark 01: 25112
Quote:
Originally Posted by Deathspawner
280 mhz?
So 1120 mhz? Your Sandra buffed, and unbuffed, dont look too good for that, With my current rig, I am getting almost 9000 mb/sec 7 gb unbuffed.
We will see tomorrow, I will post results.
~Mike
That made DDR2-933. No clue why I forgot to mention that. I am still tweaking, but am really held back by my damned CPU.Quote:
Originally Posted by arisythila
Anymore updates?
My overclocks:
250FSB 500MHz 4-4-4-15 2.3v
280FSB 467MHz 4-4-4-12 2.3v
250FSB 500MHz 4-4-3-15 2.3v
200FSB 400MHz 3-3-3-8 2.4v
267FSB 445MHz 4-4-4-8 2.2v
260FSB 520MHz 5-5-5-12 2.4v
I cannot tighten timings at all at stock, except for tRP which makes no real performance difference. I can't get anything above DDR2-1040 either. There are others who are achieving far higher than this though, so I know I am being limited by my hardware.
What voltage are you running those at? 2.3?
I got my set today, Direct from OCZ them selves. I have to reformat(damn trojen), and then I will get back on here, and post my results.
~Mike
Update:
DDR2-1000 4-4-4-15 @ 2.3v
AMD 3800+ @ 2.5 Ghz
Sandra Buff'd 9854/9804
Sandra Unbuff'd 8599/8483
Ill have more.
~Mike
I posted a review, but the results are nothing like what arisythila is getting. Going to get an AM2 in the next couple weeks to start seeing better results, and probably better overclocking.
More results. I was about to go to a max of 580 Mhz (DDR2-1160 4-4-4-15) I tried to post at 295mhz, and 300 mhz, couldnt do it. So I only got up to 290 mhz. I guess my little 3800+ sucks. Cant win them all.
520 Mhz Buff'd
http://img46.imageshack.us/img46/5097/520mhz2ow.th.jpg
540 Mhz Buff'd
http://img211.imageshack.us/img211/9...uffd7ll.th.jpg
560 Mhz Buff'd
http://img213.imageshack.us/img213/1...uffd2hy.th.jpg
580 Mhz Buff'd
http://img211.imageshack.us/img211/7...ffd10bo.th.jpg
I think this memory can do DDR2-1200 easily. But I am just unable to even post at those speeds. So maybe they are not capible.. But hell. Still awesome memory.. :-)
~Mike
doing great so far, whats the voltage in the above set?Quote:
Originally Posted by arisythila
and if you can't post at 300, then clockgen that old girl up. have you tried the chipset voltages? i haven't had any issues with my M2N32 and getting POST up to 330-350 no issues. if you want some screenshots of BIOS settings just holler and i shall deliver.
*** riiiiight...its late and i'm an idiot, your POST issue isn't board but CPU, your on the 10X. time to not just open the eyes but turn the brain on too ;) my bad ***
hehehe, yeah, Athlon 3800+ If I had a FX or something, I could hit DDR2-1200 maybe higher, This was all on 2.4v so I mean I still have .15v left.Quote:
Originally Posted by 3oh6
~Mike
Why not just lower the multi and see if you can get DDR-1200?
If you lower the multiplier on AM2 you set a divider. 10x is a 5:6 ratio I think
At 9x I'd have to run 334 x 9 to get 1200 mhz memory (3Ghz CPU)
At 8x I'd have to run 380 x 8 to get 1200 mhz memory (3Ghz CPU)
at 7x I'd have to run 430 x 7 to get 1200 mhz memory (3ghz CPU)
Edit, If I did have a 12x processor, I could lower to 10x .... Eh, Still puts me in at 3 Ghz. Maybe able to handle 3 ghz tho on air.
~Mike
Hmmm...forgot about that ratio thing since I don't have an AM2 to play with yet. :slapass:
yeah, sadly there's no way around needing a CPU that can do 3ghz to be able to get 600mhz ram.. silly cpu/5 remaining the lowest divider. i really wish cpu/4 had been put in :slap:Quote:
Originally Posted by RyderOCZ
all i have been hoping for since i got my AM2 gear was a CPU/4. does anyone know if there ever will be a way to get a CPU/4 out of AM2 boards? or is it one of those situations were it won't be a simple matter of a BIOS implementation and something that just won't be possible?Quote:
Originally Posted by ozzimark
Yeah sucks, Maybe they can put a DDR2-1000 into bios like they Tony did with the DFI boards, putting DDR-500 into bios. Even then, the Socket 939's didnt have problems with lowering multipliers.Quote:
Originally Posted by RyderOCZ
~Mike
Very nice set but would you be eager to show any demanding stability bench, please? :) The old-fashioned SPi32M will do and I suspect you could hit DDR-1140 with this kit - just want a confirmation :)Quote:
Originally Posted by arisythila
Thanks! :toast:
Alright, I will run SPi32m for you Bach
~Mike
This is very broad, I have not done any tweaking yet, but this is roughly as high as I can go.
CPU 2.8 ghz
1140 Mhz 2.4v 4-4-4-15 CPU at 1.45v. SPi32M Stable
~Mike
we need some more conroe results.
Im not sure if Conroe could come close to bandwidth that AM2 has at its disposal.
~Mike
Hey, are they available in Canada ? I have a few DDR1 set I love but no DDR2 yet. Sexy heatspreaders :cool:
My sticks are in the post at the min... just need my conroe then ill be able to see how well i do. i could do with some stock settings for these on a Asus p5w dh. please
thx