here a list of a few 0631APMW's:
1495648G60593 => obarok => 3375MHz prime air
1495658G60279 => stunned_guy => 3869MHz
1496338H60387 => obarok => 3200MHz @ 1.5V prime air
1496358H60667 => bruce
1496568G60071 => gianni => 3669MHz
1496568G60677 => gianni => 3778MHz
1496578H60222 => gianni => 3787MHz
1496578H60519 => ebay
1496578H60736 => selloutking => 3200MHZ @ 1,45V ohne HS prime water
1521468H60496 => obarok => 3100MHz @ 1.52V prime air
i think (i hope) your chip wouldn't be a granate :D
My respect, keep it the good work up!
Is ur cpu block ZERN and how good is it. I intend getting one from Ebay but am abit confused on how good it is.
If I can get it to 3.7, then I'm happy.Quote:
Originally Posted by gianni-gt
if I can fight for the WR, then that's just a HUGE bonus. Just hope I don't get a crap chip like one of my CCBIE 0608BPMW's (not even 3g stable, delidded, high-end WC and ~1.62v).
Mr. Postman brought me a new 4000+ today, KAB1E 0629APMW.
Forgot about this one lol. Can't find any results, what do you think about it, gianni/stunned_guy?
No time for testing atm, moving into a new flat;)
Please test it if you have some time because no one of us can tell you something about that stepping. But APMW is ever good.
Bruce, I´m the highest bidder at ebay but I don´t think that I will buy all that CPUs.....
I'll see if I have the time durning next weekend. Depends a bit on the temps as well, no reason to try to get decent scores if it's hot outside;)Quote:
Originally Posted by stunned_guy
Are low batch #'s usually better OC'ers, btw?
it's not a garantie for better oc....
for example my two 0614BPMW's...
batch 055: 3721mhz superpi stable, cpu-z 3821mhz, 3621mhz prime
batch 140: 3671mhz superpi stable, cpu-z 3871mhz, 3505mhz prime
sometimes it's a bit strange...
I was thinking about that CABXE ;-)Quote:
Originally Posted by gianni-gt
I had an LCBIE 0627TPMW, # 001. 2.95 @ 1.35v/air. Unfortunately killed during IHS removal:cussing:
And mr Postman left a note where it said an FX55 could be picked up at the post office. Turned out to be CABCE 0516WPMW, 1241793D50002
this fx-55 could rock (under ln2)...
1241734D50265 => my 4ghz chip...
1241793D50002
Gianni, what about this stepping?
ADA3000DAA4BP
LBBLE 0531CPMW
dr. google said ~2800mhz but i don't know what cooling... but i think when i get an 3000+ it would be an E6, like stunned_guy... but in the next weeks no cpus for me :(
The (little) I found about LBBLE's was that 0517 is the week to look for:)Quote:
Originally Posted by massman
i think no one is going to crack the wr with an E3 ;)
I´m not sure about this, gianni, but its very hard to find an E3 Venice 3000+ to crack the record. I wonder why this was possible with an E6 because in the last time no one had some great results with that.
ada3800daa4bp
lbble 0521dpmw
Same stepping as Stephen's 3200+ :)
I seriously doubt E3's can beat some of the WR's. The best E6's own:D
CAB1E 0633APMW 3800+ in the mailbox today, any comments?
And a CAB2E 0634GPFW 3800+ on the post office. Don't think it's golden, but who knows:D
Darn I wish these had arrived a week ago...
stunned_guy and i tested a few 0633 chips... not venices but all of these chips has a hell of a coldbug... the best temp for mine was +23°C!!
btw: bruce, what cooling options do you have?
LOL that bug is INSANE:shocked:Quote:
Originally Posted by gianni-gt
3v vcore is needed I guess:D
Best cooling I have ATM is a Storm rev. 2, Norwegian night temps (getting colder, but not arctic temps here yet lol) and a bucket of ice I smash into small pieces.
no singlestage or something?
I had a Vapo PE once, but my friend shortcutted something on it *sigh*.Quote:
Originally Posted by gianni-gt
Trying to save some cash for a "new" one, but when I think I save some cash - then some nice steppings show up on ebay and - tadaaa - those bucks are gone:D
There will be a HUGE LAN in Oslo next month, where the top Norwegian OC'ers will be benching. Stoolman, Overklokk and a few more. If they let me borrow a unit I'll bench everything I have:D
Should I buy this one? This A64 madness has caught me, I'm afraid :DQuote:
Originally Posted by massman
Ada3000daa4bp
Ybble 0523cpgw
Q337396f50860
=> This one sucks, right?
cpgw, what's that? :D i would say that chip suxx...
And the other one? Was Stephen just lucky with the stepping or is the stepping good?
i think that stepping should rock, buy it, test it, kill it :D
I shouldn't get into this ... will buy it though :D
Hopefully next week 3000+ winnie, 3500+ venice (sucks) and 3800+ venice
Let us see some results ;)
Btw: this thread is so amazing, I love it :D
yes, what tell us near 26k hits? => s939 is not dead
Yup, this is my #1 thread on XS:clap:Quote:
Originally Posted by stunned_guy
I could found some more MHz:
3000+ @ 3698 MHz @ 1,904 volts.
I will this 3700 MHz !!!! :D
hardcore!!
Break the 2v mark bro:flame: :explode: :caution:
Negativ, the CPU will not boot with more than 1.936 volts, for validation is 1.904 v only possible :(
Today I try more, will see the 3,7 GHz !!!!!!
Come on, you can do that! :banana::banana::banana::banana:
Found info about the 3500+:
ADA3500DAA4BW
LBBWE 0532MPM
0176
=> Sucks, right? :D
every stepping with only 3 letters suxx ;) all of these were produced in china ;) the good one's comes from malaysia...
Actually, MPM's are from Malaysia. The chinese steppings look like this: AAB, BAD etc.Quote:
Originally Posted by gianni-gt
MPM's usually suck, that's correct:D My 3700+ Newcastle is an MPM.......
today i've upgraded my server to s939... all systems in my house are now AMD K8 :D
DDDDDDDDDDDDDAAAAAAAAAAAAAAAAAAMMMMMMMMMMMMMMMMMNN NNNNNN!Quote:
Originally Posted by stunned_guy
My 3000 wouldn't go past 2.2ghz (got the really bad stepping):(
Here is my promise:
3712 Mhz !!!! I take another ram divider, the 120er at DFI and it rocks :D
geez. you've already reached a 100% oc, now go for 2ghz!
:eleph: you made my day! :eleph:Quote:
Originally Posted by stunned_guy
holy crap, stunned_guy you're crazy :D
*Massman starts search for the same stepping*Quote:
Originally Posted by stunned_guy
What batch is your cpu?
Batch 233
Z878477A60233
Here are some more MHz I found tonight:
3726.02 MHz Will try the 110 % overclocking :D
Today the hunting goes on...
ADA3500DAA4BW
NBBWE 0606DPBW
Z887636B60135
Any good?
ask google or test it, please ;)
ADA3200AEP5AR
AAARC 0346SPAW
RFBCAX5K30075
A friend of mine has that chip (it's mine, but the seller didn't want to ship it abroad so i ahd to send it to him first;) )
Again, funny stepping.:D
hehe a clawhammer and damned old :D
4 years.... Oldest chip I'm ever going to bench I think:DQuote:
Originally Posted by gianni-gt
Edit: I have an AAAHC 0319TPAW as well... 3100+ s754. Didn't they still make Palomino's and T'Bred's back then?? :D
weren't all steppings with A**** ES sample? Stephen mentioned it once, I think.Quote:
Originally Posted by knopflerbruce
Anyway, try the chip, who knows, you might get lucky.
Btw, anyone seen the KABJE 0449 stepping?
never heard of KABJE 0449. BUY IT!!!!:DQuote:
Originally Posted by massman
I always thought the newer ES's were those Axxxx that has the core voltage written on the bottom of the chip.
Think I have a 156 and fx60 ES on the way, too:D Not 100% sure though, the company I bought them from has some problems... I keep my fingers crossed.
Opteron 156 ... :D
AAB1E 0601WPMWQuote:
Originally Posted by massman
Wonder how it does compared to the chip gianni got;)
The fun part is that I paid $156 for it lol. Which is quiiiiite alot less than gianni paid for his chip :D
EDIT: The FX60 has stepping ACB9E 0607VPAW, btw. Earliest B9 I've EVER seen.
AAB1E :)
"1st letter: "production/release code"
Pre-production or early samples have an "A" here where final production batches will be a "C" (for current chips). Some may recall that Venice samples where seen in the wild as "ABBLE" and current production runs are "LBBLE". While complete understanding of this is unknown at this time, it is clear that this has something to do with early samples."
There is an ACBWE 4200+ in the post office at home, too. Made 70 weeks before the "normal" chips (0513TPMW). I have no high hopes for it, but it's nice to have;)Quote:
Originally Posted by massman
Darn, didn't realize I had THAT many early samples lol.
lol this opteron 156 is too cheap :D
tomorrow or wednesday i'll put my fingerprint on my opti 156... AND attention: a new 3700+ 0614BPMW! lower batch than my other one's :D
and in the next few weeks i can lend a opteron 146 CABNE 0530APMW :)
ARgh, I envy your 0614bpmw's. I think all of these chips were sold in Germany:mad: Makes it hard for me to get hold of some.
Won a 3500+ San Diego (a REAL SD, says BN not BW on the chip;) ). Stepping... AABHE 0502XPMW - oldest SD I've ever seen! 1.4v btw.
Is that the 146 that's for sale on forumdeluxx? Remember I bid on it - even wrote to the guy in GERMAN about that chip lol. He said yes, but that's all that ever happened.....Quote:
Originally Posted by gianni-gt
damn! a 3500+ SanDiego! i've never found such a cpu :(
the 146 is from forumdeluxx, but i don't know if it's the same guy...
Seems like you only have old chips :pQuote:
Originally Posted by knopflerbruce
Anyway, I might buy myself a 3500+ Winnie with WR stepping :). Seems like it doesn't have a coldbug:D .
Did you already tried a 0550 TPMW 3500+? It's a manchester :DQuote:
Originally Posted by gianni-gt
The WR Stepping of the 3500+ Manchester is 0633 FPMW...
@ Bruce
Thats an very old 3500+ San Diego...I thougt every time that these cores would be relabeled in the nearer past...
Hmm, no idea what to think of this one:
ADA4000DEP5AS
CAAXC 0430 MPMW
Batch: 0070
Seems to be a FX-53 stepping, but I can't find any info about the stepping.
Hmmm, 0633fpmw... that MUST be a CDBFE, am I right? Those are coldbugges, I think.Quote:
Originally Posted by stunned_guy
I have a feeling I won a 3500+ CDBHE 0540FPMW a while ago. Not sure where it is now, maybe at some friend's house or something. Should be decent.
The 3500+ SD's were labeled VENICE for some STUPID reason lol. No idea why they would do that.
I saw an FX55 AAAXC 0430MPMW once, so it could be an FX55 stepping actually.Quote:
Originally Posted by massman
Triplepost lol. Sry ;-)
Is 0633EPMW better than 0633APMW?
i would say NO.
0633 EPMW is very cold bugged :( I testest two of them under single stage and horrible cold bug....215 MHz HTT @ -30°C so far.
@ massman
This 4000+ should rocks but its not safe. The batch seems interesting...
Where do you get your cpus ?
Difference between E and A is the day of the week. Though, it's not known (by me) what day as there are more than 7 letters for exactly 7 days ... :(
Nevermind the chip, I asked the person who has selling the cpu if it was an actual picture of the cpu and it wasn't :(.Quote:
Originally Posted by stunned_guy
So far, all my world-class steppings (3000+ winnie, 3000+ Venice, 3800+ venice, 3500 winnie) come from fellow members of the 9lives forums. I'm checking eBay once in a while to find out if there are good steppings available or not. Mostly not :).
A and R = monday, B and S = Tuesday, C and T = Wednesday, D and U = Thursday, E and V = Friday, F and W = Saturday, G and X = Sunday.Quote:
Originally Posted by massman
M = mixed(?)
Edit: what stepping is that 3800+ venice btw?
Source of that info? Searched all day for it and I didn't found it :)
M is indeed mixed, AMD datasheet describe M as "M if fab lots were combined"
Stepping:
ada3800daa4bp
lbble 0521dpmw
z71139zfs1939 => Same stepping as Stephen's killer 3200+
the two babies for the next playboy magazine: :D
http://octs.ripping.org/new_babies.jpg
:o !! The CCBBE 0617TPMW was quite good with the DCs. There's such 165 doing 3.4ghz on water you know ;) :up:
i know the stepping from the 3200+ ;) one of the best stepping... also 3.4ghz cpu-z on water...
btw: the chip has to be good, for 271€ :D
Can someone pinpoint me a 3700+ made in China?
I don't think such a chip exists. And why would you want to have one? The good ones are all made in Malaysia:DQuote:
Originally Posted by massman
@gianni: I wonder if your 156 is good, too. I saw a 3200+ with the same stepping, did 3100 @ 1.4v.
Which 3700+/4000+ Toledo steppings are decent, btw? Not sure what to look for, and I can't afford to buy any chip I want anymore:(
Now the battle can begin :banana: Lets go dude !!!
@bruce:
3700+ Toledo WR-Stepping: 0640 CPMW
4000+ Toledo WR-Stepping: 0641 EPMW
SH-E4 > DH-E6, right?
Yes, at least if you get a decent E4.Quote:
Originally Posted by massman
Well ... this is a thread in which people only talk about decent chips :D
@ massman: KAB1E SD's are the best. Some weeks/batches are better than others, but that's what you're looking for;)
Bruce, do you have the source of the stepping information you gave here
I read it somewhere, but I can't give you any links to verify it.Quote:
Originally Posted by massman
But it sounds right to my ears at least. No idea why they use A-G AND R-X instead of just one of them, though.
Maybe A-G are used for AM and R-X for PM ?
You're sure about A and R for the monday, right? Maybe they consider Sunday as the beginning of the week :).
@massman Not sure about what's day A,B etc ;-)
Should I get this one: LCBIE 0617FPMW? 3700+ low batch # as well:D
Pretty sure that one will coldbug.
That's no secret:D But the best A64 CPUs usually have a pretty bad bug.Quote:
Originally Posted by massman
i tell you guys all the newer E6 sandiegos has a coldbug ~ +10°C. i hate these E6 cpu's....
Hmmm, in the coldbug thread it says LCBBE's do FSB 300 @ -30. That's not so bad. LCBIE's seem a bit worse.Quote:
Originally Posted by gianni-gt
But that 0617FPMW - I just remembered that's the same week/day as my Opty 165:D WR potential in that baby...
I can finally used my brothers DFi to play with my chips. These are the things of joy:
ADA3000DIK4BI
CBBHD 0445 SPAW
1146837K40085
ADA3800DAA4BP
LBBLE 0521 DPMW
Z711392F51939
ADA3500DAA4BW
LBBWE 0532 MPM
4410964H50176
Quote:
Originally Posted by massman
You need sub-zero cooling to get nice results with those chips.
Tie your brother to a chair and start insulating that mobo:D
Not sure how great those steppings are, could be good or bad ones. MPM is never good, though;)
First one is the WR stepping of the 3000+ Winchester, second one is the same stepping like Stephen's magic 3200+, third one sucks (265x10 @ 1.55v) :)
Mach2 cooling is ready, will try to prevent the cpu's from coldbugging, though.
I have two CPUs, 3000+ and 3700+.
Are these steppings good? They had never been overclocked.
LBBLE 0517 DPMW
This is my 3000+
ADA3700DAA5BN
KAB2E 0547 DPHW
1369039K50716
//Doman
Sounds nice:DQuote:
Originally Posted by massman
I always thought 0448 was the #1 week for the Winchesters. My CBBHD 0448SPBW 3200+ is quite good. Don't remember exactly, but I think 2.9 stable or something like that. On regular water cooling.
Didn't test it too much because the BH's need exotic cooling anyway;)
I was offered a 3800+ last night. ABBLE 0444XPAW Grabbed it straight away:) Wonder how it does... earliest E3 I've seen so far.
The 3700+: Average I think. B2's are never great, but 0547 was a decent week.Quote:
Originally Posted by Doman
The 0517 could be quite good, read somewhere that it's one of the best weeks to get.
3000+ Venice: CBBLE 0512DPMW or the newer NBBWE 0602APAW. My CBBLE didn't have a coldbug :)
@Bruce: You always seem to get the Axxxx steppings :D
I know a dude who has a whole bunch of them:DQuote:
Originally Posted by massman