FELIX, neither cpu tweaker or memset can work on my computer, they only showed the message ‘not for this system’ or ‘not for this cpu’. And my cpu is Athlon X2 QL-64, and the chipset is RS780, can you add the support of my system, thanks.
Printable View
FELIX, neither cpu tweaker or memset can work on my computer, they only showed the message ‘not for this system’ or ‘not for this cpu’. And my cpu is Athlon X2 QL-64, and the chipset is RS780, can you add the support of my system, thanks.
could you make a registers dump (with cpuz->last table->Save report (.TXT))
and send it at memset@hotmail.fr Thank.
@FELIX:
First of all thanks again for making and developing this fundamental OC tool(s). :bows:
I have a suggestion: if it is now too time consuming and is doesn't require too much changing, it would be nice to have couple of profiles that could be set and loaded when required beside the one for loading at startup.
mail sendedQuote:
Originally Posted by FELIX
Thanks for all your work at this it looks like a great tool, I am having some issues and have searched everywhere youtube, tweakers.fr, read the first ten pages of this thread, does the notepad image give us the recommended settings or the current settings ? and I have tried to use them and my machine froze, then, some of the values on my memset 4.1 wont allow me to go under the first value of 9. thanks for all your support
Ga-ep45t-ud3p Giga-byte
e8500 @ 3.17 wolfdale
cm3x1g1600c9DHX pc3-8500U corsair
ATI 4850 X2 sapphire
Tuniq 1100w bronze cert
windows 7 ultimate 64
...sent. :)Quote:
Originally Posted by gbwg
loss faceQuote:
Originally Posted by Brama
=> streetwolf: use this version: CPU-Tweaker 1.4
=> gbwg: use this version: MemSet 4.1
=> donmarkoni: if you want to save a memory timing profile:
First, Save the profile you want at startup
-> delete the cpu-tweaker icon in the startup folder
-> go in the Windows folder (usually C:\Windows)
-> move the memsave folder in an other folder where you want (name it 5.5.5.15 for example).
-> start cpu-tweaker in this memsave folder for apply the memory timing you has saved.
Not practical, but I can't add this function for now.
But, still only "not for this system" is displayed.
...sorry, re-download the version.
Thanks! Not practical, but useful for sure! :up:Quote:
Originally Posted by FELIX
I'm sorry, but the problem persists and only "not for this system" is displayed.Quote:
Originally Posted by FELIX
...re-re-download the version. :D (mixed ID)
Hi all, i used memset 4.1 for start OC'ing but i saw this:
http://img688.imageshack.us/img688/8229/stocksystem.jpg
Howcome it shows me ddr2?? I have OCZ PC3-14400 DDR3 (when i click on spd, shows me DDR3 so....?)
Just a Bug? or need to get worried? I have 2x2GB modules set in A2/B2 Rampage Extreme, E8500
Thanks a lot, it can work now. But there may still be a little problem that only the momery on DIMM0 is recognized bit I cann't find another memory.
I finally terminate the CPU-Tweaker monitoring window, composed by:
-graph(s) per core(s) (dependent of your number of cores),
with the core load and its temperature.
-a graph for general CPU usage and average temp.
-a graph with CPU and RAM frequency.
-a graphe with used memory size and pagefile usage.
Also its possible to let CPU-Tweaker in the systray; 2 icones was created,
one with the CPU load, and one with the highest core(s) temperature.
A right click on an icone show a popupmenu, for open cpu-tweaker, monitoring or spd windows.
Prime95 on a core i7 920 and 3Go of ram:
http://img18.imageshack.us/img18/8356/51762388.jpg
I tested it on a PhenomII x3 720 too...
It should work on Phenom I&II, Core i3/i5/i7/i9.
Here is the link: CPU-Tweaker1.5 beta2.zip
Let me know if you find bug or problem...
Looks great! :up: Will try it as soon as I get home.
EDIT: I'm home. Here is s.s.
http://img404.imageshack.us/img404/2...cputweaker.jpg
Indicators are left in the middle of graphs at the position where mouse pointer left it and they tend to stay. Bug or intentional?
...intentional, but I can change all. In fact I didn't know if I have to let or delete indicators
when mouse quit the graph. (like Riva Tuner for example).
Also, I don't know what it's better between show average core temp or highest temp of cores...
Highest IMO, definitely. Or make some switch?
Haven't you did it already? I thought those numbers up and down on the right side of the graphs are min and max values. And the changing number in between is current value. It look great IMO and it's very informative as well, if that's what it is.Quote:
Originally Posted by FELIX
...You are right for up and down numbers.
I spoken for the average temp show in the graph "General cpu usage and average temp".
Actually, it show the 4 cores temp /4, but it's possible to show the highest temp of
the fours cores (The systray icon show this highest temp).
Perhaps a switch, as suggested by zalbard.
Good Day. I am in the process of getting my new rig up and established. I am running a DFI P55-T3eH9 (BIOS 203) with a i3 530. Memory is OCZ PC3-1600 Platinum Low Voltage 2 X 2 GB sticks.
There are only two settings in the BIOS for QPI, 4.8 and 4.27. 4.8 is 22 multi, 4.27 is 18 multi (I think). No matter which I set in the BIOS, CPU Teaker (V1.4) reads a multi of 22. Now, I see Eva2000 is getting a different reading in V1.4 Beta6.
I am trying to figure out if the problem is CPU Tweaker, the i3, or the BIOS. All other readings in CPU Tweaker, CPU-Z, Smart Guardian etc seem to be correct, although I am not aware of another tool that reads QPI.
Any help appreciated, it will help me refine my overclock.
Could this be a bug? Or is it problem on my side?
http://img402.imageshack.us/img402/8...akererrore.jpg
Interesting is that CPU-Tweaker remains fully functional until I click OK and it gets closed.
Never mind. CPU-Z reports the same thing, a multi of 22.Quote:
Originally Posted by Capt Proton
=>Capt Proton: probably a bios bug. Have you tried with Everest?
=>donmarkoni: could you try with this version and tell me the result...
Otherwize, is this happen just after that you open cpu-tweaker or after a few minute?
When its happen, could you open the monitoring window for checking that all is correct too... thank.