Im at 5ghz with 1902
Printable View
Im at 5ghz with 1902
andressergio
you will show your BIOS to 108 blck ?foto
it is newer than 1596, but older than 1902, and all three are 3D01 specific bios.Quote:
Originally Posted by badatgames18
for 24/7 1409 and 1850 are better choices, as I noticed when I was pushing bclk on 1902 I would lose the first set of usb ports, but other than that it is good for benching.
sure mateQuote:
Originally Posted by Martin.v.r
http://img196.imageshack.us/img196/3175/5600108x52.jpg
Uploaded with ImageShack.us
hmm not this foto,from bios ;)
Still running my system at 1.375v 5ghz
have a problem with the latest bioses my setting in aida mem bench dont show up right!
http://i19.photobucket.com/albums/b1.../5Ghz1375v.png
damn sorry Martin lol i will take and post nowQuote:
Originally Posted by Martin.v.r
http://img88.imageshack.us/img88/8120/110916230806.jpg
http://img825.imageshack.us/img825/6...0916230831.jpg
http://img840.imageshack.us/img840/9...0916230903.jpg
Uploaded with ImageShack.us
hope are useful for ya
cheers
Serg
ty
is it whit c stat ? on
no i just put C1E and EIST for ma 24/7Quote:
Originally Posted by Martin.v.r
ty
max blck whit this cpu on water is 106 x 50
but whit DICE I can 101 x56
vcore hungry cpu :(
well its a x56 Martin very nice not all have that kind of CPU, i have one x56 its a Costa Rica vcore hunger, this Malay its awesome so good that i only tested that and x56 for some runs and i dont want to punish it moreQuote:
Originally Posted by Martin.v.r
Sorry a bit OOT:)
I just got its brother Asus CH5 Formula (preping for AMD FX cpu) and really like it....Easy 2100 7-6-7-20 which is the first time for me. Lol
I have one on the way as well for the same reason. What chip are you running in it now?Quote:
Originally Posted by Dumo
X4 955...http://www.xtremesystems.org/forums/...=1#post4951629Quote:
Originally Posted by Devil_Dog
looks good, but u're going to stay longer to watch Pi finish running LOLQuote:
Originally Posted by Dumo
I meant 2100 7-9-6-20 on AMD 990X:DQuote:
Originally Posted by owikh84
what was that "skew driving voltage" for?
sorry i dont know :(
like an offset?
M4E will support the new Intel 22nm cpus ?
hey mate its for going high on bclkQuote:
Originally Posted by badatgames18
thanks andre.. i'm trying for 108 myself.. on my ud7 i ran 106.5blck 24/7... you think 108 24/7 is possible without running into any issues?Quote:
Originally Posted by andressergio
EDIT: most i can get on this is 105.5 with skew driving voltage @ standard 1.04 and blck skew @ -10 :(
bios 1850
cheers
my UD7 B2 does 107x but never tried for 24/7Quote:
Originally Posted by badatgames18
keep trying on the mive
here's some nice guide for ya
http://kingpincooling.com/forum/showthread.php?t=1041
cheers and good luck
Serg
thanks! as i read the guide... i knew what i did wrong, i was just plugging in settings without slowly easing into it. So i did what i had to do with my ud7... went up in blck by .2 each time, reboot do the same thing until i got to 106.5. Old ud7 would revert back to old bios settings from cold boot though... hopefully this doesn't.Quote:
Originally Posted by andressergio
Used skew driving voltage: 993
blck skew: -12
Will keep trying to push it.
Appreciate your help andre :)
http://img405.imageshack.us/img405/296/blckmive.png
@ badatgames
here is an older screen shot of 107.6 with voltages that might help you, it is not really efficient as I was just trying to see if the mems would run 2000 6-8-6.
http://i.imgur.com/bPZqk.png
that was on water and with no tweaking of any of the bclk skews / driving voltages, so I imagine 108ish is doable with some work, at least on that chip.
great man glad it worked :)Quote:
Originally Posted by badatgames18
Guys I just got my hands on this board and a 2600K . I have a couple of questions which bios is best for the highest 24/7 stable overclock? also I have noticed two four pin molex headers on the board but on the Quick Start it does not tell you to attach anything to these headers?? Are you guys attaching 4 pin molex connectors to them or not?? and what are they for ? Do they improve stability etc??? Thanks for your help.