Printable View
re did my loop after adding in the maximus nb
the case is a lian li pc-201b just in case anybody asks
changed from blue to red but i'll think ill use black tubing the next time around
http://img410.imageshack.us/img410/2969/22303541oi9.jpg
http://img128.imageshack.us/img128/4229/99459770ih0.jpg
http://img134.imageshack.us/img134/9573/98002473eg4.jpg
http://img510.imageshack.us/img510/2084/39840523qy6.jpg
RockfordFosgate,
You better hurry up and buy the copper top for your GTX before these aluminum hating monsters eat you up lol ;)
I'm controled the top but no problem.;)Quote:
Originally Posted by IanY
I'm always Using AQUA's Anticorosion Liquid and I dont have a problem :up:
Never have a problem myself lol :up: And I actually have a copper top at home but never bothered to switch it out. Opened it up two weeks ago. Nothing... nothing at all :p:Quote:
Originally Posted by RockfordFosgate
to CD :Quote:
Originally Posted by Waterlogged
i do not know what is all about, but i give a less then a cent to that you sell some of your rigs. that is not a theme in this tread and not of my concern...
I agreed with Waterlogged...
ps. I built one moded case and maybe thinking to sell it, but don't talk about...
on the other hand, may be wrong :)
no offense to any1 :shrug:
ps2 : through-window-IWAKI external wc system is one of my favorites and must-to-do mod things. on that, GO ON...
Who said anything about worklogs ;) You assume too much especially since you can go back and look at my posts and see NO worklogs here. Just a lot of petty BS from some whiners.Quote:
Originally Posted by Waterlogged
I was taking note of the numerous Quotes including pictures just to say "good job" which just recently were a source of such annoyance for everyone...and now aren't: go figger.
You may now unwad.
Awesome Rigs!!!! Rockford And Aldy!!!!!
Lian Li Lovers Just Like Myself!!!
:)
Aldy402 and RockfordFosgate, did you both cut the bottom of your case and attach the rad? Or just plonked it on the top of it?
Btw nice builds :)
lets not dig this :banana::banana::banana::banana: up again, back to the picturesQuote:
Originally Posted by CyberDruid
it was jigsawed for airflow, a complete necessityQuote:
Originally Posted by step
thanks everybody
How hard was it to get the air out of your fuzion with it upside down aldy?
This watercolor suck's. :down:Quote:
Originally Posted by Aldy402
it doesn't make a difference for me upright or upside down, I bleed in literally 2 minutes. Most likely because of the ek resQuote:
Originally Posted by SparkyJJO
yea its supposed to be red but combined with the flash of the cameraQuote:
Originally Posted by deepsilver
it looks crappy
no more colors for me, im moving to tygon black.. but thanks for your commentary
Just so I can have a reference of the size, what reservoir is that Aldy? The Ek 250?
150Quote:
Originally Posted by Canadmos
Oh, it is bigger than I realized. oops
whoa. that doesn't look like a 150...
but i guess the 100 is smaller than that.
Some small not so obvious tweeks, but a good few hours work ... Mobo I suspect had some dry joints that came to light installing memory a month or so back, and didn't cope with the transplant intact, so was swapped for a replacement but in BFG flavour.
And the PSU was annoying me, it aint that loud, but as everything was geared for ultra low noise it was the loudest thing in the system.
So that was swapped out for a Corsair unit.
Wonderfully quiet now, but that did mean another cable routing session :o
While I was at it I tidyied the tubing a little as coming from the resovoir looked too wayward to me, I have to have some slack to slide the res forward for maintenance so I decided pipe clips would help tidy it up and I could just unhook the tube when I need to slide the res forward :)
http://homepage.ntlworld.com/gypsypi...ages/wcp15.jpg
http://homepage.ntlworld.com/gypsypi...ages/wcp16.jpg
http://homepage.ntlworld.com/gypsypi...ages/wcp17.jpg
Nice build and good idea on those clips.
im getting more and more satisfied by the tj07 case.
Only problem is that u may have to buy a 5.25" to 3.5" bay in order the get the hard drives installed right ?
Yes, thats the case unless you use a 120.2 rad, then you can probably use one of the supplied bottom mounted bay racks.
There are plenty of 5.25 bays ... having said that, I have used them all, what with the Karma fan grill, one HDD, 2 DVDRW drives, Fan controller and Bay Res.
But without the Karma I could fit 3 HDD's in the space.
nice WC :up:
The setup looks really nice and clean.
Hey guys, here my pictures :)
http://www.milan-clan.org/~riverna/H...g/DSC02208.JPG
http://www.milan-clan.org/~riverna/H...g/DSC02210.JPG
http://www.milan-clan.org/~riverna/H...g/DSC02211.JPG
http://www.milan-clan.org/~riverna/H...g/DSC02228.JPG
http://www.milan-clan.org/~riverna/H...lung/PcNr1.jpg
http://www.milan-clan.org/~riverna/H...lung/PcNr2.jpg
@ Riverna: ur res isnt big enuff :p:
sexy rig bartflaster very clean and sleek!
Someone show me a res tornado!!! I <3 them :D
I feel embarrassed, all these systems are so much neater then mine.
Riverna is probably getting a lot of leaks, so a huge reservoir keeps cool :rofl:
j/k ;)
My first water cooling project. :D
From this...
http://i54.photobucket.com/albums/g1...er/inside1.jpg
To this...
http://i54.photobucket.com/albums/g1...de3resized.jpg
:clap: thank you for adding to the Stacker thread as well.
awesome rig fireice2!!! i love those aero-cool white led fans!! look sik!
@phelan
NP. :D I'd still be a stock user if it were not for XS. and I would still be using cheap cases if not for the Stacker tread. :D
@disruptfam
Thanks. One more upgrade to make... get rid of my 8600GT and get a better GPU. hehehe after that I'm sitting tight till I finish taking the Bar exams. :D
fireice2 can i get some more pics of your case? i wub the 830 and always wondered for people cool it
Its an 832 actually. :D heheheQuote:
Originally Posted by Origin_Unknown
Here is my First attempt !
This is my EVGA 8800GT SSC W/ MAZE 5 and Enzotech BMR-C1 Copper Ramsinks.
http://i120.photobucket.com/albums/o...p/IMG_2586.jpg
The outside: LIAN LI PC-A16B
http://i120.photobucket.com/albums/o197/msarp/001.jpg
The inside:
http://i120.photobucket.com/albums/o197/msarp/005.jpg
Dust off that radiator :shocked:
Yea that definately needs dusting, thats going to be hurting your temps.
Hi guys, have updated me baby and am here to show her off!!!
Enjoy
can we get some more pics then please :DQuote:
Originally Posted by fireice2
That's a good decision. :DQuote:
Originally Posted by Aldy402
is it just me?Quote:
Originally Posted by ka lok
but i think the waterflow on your fuzion is backwards.
My AquaDrive:
http://i223.photobucket.com/albums/d.../AquaDrive.jpg
with Cuplex:
http://i223.photobucket.com/albums/d...ith_Cuplex.jpg
and the new AquaStream XT Ultra:
http://i223.photobucket.com/albums/d...uaStream_1.jpg
http://i223.photobucket.com/albums/d...uaStream_2.jpg
http://i223.photobucket.com/albums/d...uaStream_3.jpg
nope not just you, I think you're right! Looks like the pump outlet is straight to the corner outlet of the fuzion, not the inlet...Quote:
Originally Posted by stormshadow
Just fix the fuzion and you have a nice rig :D
Not me, it looks right. If you look at other pics, you will see a tube coming from the pump to the radiator and another coming up from the rad 90 degree to the CPU. It's just a optical illusion caused by a picture angle.
It's wrong, the water is flowing out of the FuZion inlet, into northbridge block, into GPU block and then into the reservoir.
Doh, looked at the wrong place :doh:
Quote:
Originally Posted by deepsilver
I cant believe how you guys take pics with such awesome lighting, where abouts is that pump sold? And how good is it?
The software that comes with it looks pretty sweet, not sure about performance though theres a post about it somewhere.Quote:
Originally Posted by Spawne32
Quote:
Originally Posted by SparkyJJO
i knew it! :DQuote:
Originally Posted by MorGo7h
but i can't help but wonder...
how are the temps in that configuration? :shrug: :)
Bugger!! didnt even know that the Block has to be a certain way :eek:. Will Change that tom.
The temps are not too bad (i think), 38c idle and 52c load. My E6600 is overclocked to 3.6ghz needing 1.5125v and havent oced 8800gtx yet.
Cant get it to be stable with orthos yet, but will play crysis with no probs, albeit stuttery at times.
By the way, silly qu ahoy- do i need to turn cpu block upside down or do i need to switch tubes round?
Sorry if im not making much sense, very new to all this.
in this case, the block is mounted fine. Just redo the tubing so that the water goes IN through the center hole and OUT through the corner hole.Quote:
Originally Posted by ka lok
cheers for pointing that guys:up:
by the way, what are the implications of having the tubes the wrong way round? just curious
you tell us :)Quote:
Originally Posted by ka lok
doesn't seem like it's a world-ending error. water is still flowing - just not as optimally as it could be.
Nice rigs guys.
will keep you guys updated on if there is any differences in temps after I switch the tubes round.
have to stop typing now coz wife is trying to sleep and apparently I tap keys very loudly! speak to u guys tom!
No doubt, looks sweet, but how dose it werk?Quote:
Originally Posted by Spawne32
http://www.sharkacomputers.com/aqcoaqmoeh10.html
Never mind, google is my friend
Edit: 7ft max head? Am I figuring this right?
Looks like a render.. I could be wrong though.:shrug:Quote:
Originally Posted by Spawne32
That's a non-XT version.Quote:
Originally Posted by AAjax
Thx!Quote:
Originally Posted by YugenM
No problem. :D here are some more pics. :DQuote:
Originally Posted by Origin_Unknown
http://i54.photobucket.com/albums/g1...ledresized.jpg
http://i54.photobucket.com/albums/g1...r/outside2.jpg
http://i54.photobucket.com/albums/g1...de3resized.jpg
http://i54.photobucket.com/albums/g1...er/Closeup.jpg
http://i54.photobucket.com/albums/g1...r/inaction.jpg
looks sik!!!! is that just distilled water no coolant??
Looks nice like that i think i may just use distilled water aswell and let the uv neon's light it up :)
when you upgrade our gfx card take out the fan side bracket thing and wc the gfx card aswell
There are also clear coolants available. Here in germany one of the best, without making the tube looking cloudy. It is called Innovatek Protect.
Available as a concentrate to mix with distilled water, or also ready mixed.
I hope to have my 343b ready soon. :( I need more space for my 2 loops. They won´t fit in my old built :(
http://www.lifepatcher.com/pc/test/sys/testsys1.jpg
Yup! Pure distilled H20. :D As for the Gfx card, I'm fine cooling it with air. for easy maintenance. hehehe
But i think I'll keep the bottom 2 fans on the side panel to keep cool components .
Hi Stormshadow, just finished retubing the cpu block and looks like this nowQuote:
Originally Posted by stormshadow
Decided to turn cpu block upside down to keep the tubing running in the same pattern.
Temps have not changed at all, still 38c idle and 52c load but have not let as5 run in yet, so temp might change still.
By the way, i think i was looking at some of your previous rigs for inspiration towards this, had one pic saved on my last HD. Thanx for that :up:
@fireice2: why not use the coolant?
I can see that :D A veritable tower of power...:eek:Quote:
Originally Posted by peebee
I see you have a coil to keep your Data cool :p: I like that:cool:Quote:
Originally Posted by fireice2
Lowers thermal conductivity. Pure distilled water for best temps :up:Quote:
Originally Posted by emoners
fireice, that looks sweet!
peebee looking good man!! could u post your worklog here @ xs aswell please
@emoners
I was thinking of adding a Fesser UV Black Dye. :D
But that would be for the next lanparty. hehehe We have monthly lanparties in my place so having a fancy coolant would be nice.
But for daily usage, I still prefer pure H20. :D
@cyber & sparky
Thanks guys! :D
Really have to thank the water-cooling veterans for keeping me away from pre-built kits and also for the ideas on how to setup my loop. :D
I also realized that my two favorite colors are really blue and purple. mwehehehe
Maybe, if it goes on with the PC 343b, I can open up a Thread. For the first it will be enough to present the german log as well. Pictures say more tha a hundred words ;) In about two weeks it goes on, so I can make a separate in here. :cool:Quote:
Originally Posted by disruptfam
A quick update:
Before
http://img123.imageshack.us/img123/6...stomfn0.th.jpg
After
http://img57.imageshack.us/img57/342...stomdz1.th.jpg
One Seagate 160G out, 2 Seagate's single platter in. Ati 2900xt out, 8800 gt in. Changed a rad, changed the fluid, and removed one fan :)
here is mine :)
the toilet paper is now gone fron ther i placed for leak test :)
http://img152.imageshack.us/img152/3...1812yi1.th.jpg http://img153.imageshack.us/img153/9...1813jr3.th.jpg http://img152.imageshack.us/img152/5...1814kr7.th.jpg
http://img529.imageshack.us/img529/7251/97259279xl7.jpg
What rads are you using at the front and back?Quote:
Originally Posted by trouble2000
I've got the same case and wondering if I can fit a 2nd loop in.
17c?!?!!?!? :S
Is it chilled? cause normally such temps are impossible or am I crazy?
If I'm crazy can you tell me which rad you have then?
Black Ice GTS/GTS-LITEQuote:
Originally Posted by ls206
http://www.hwlabs.com/gen2/gts/gts120.htm
My lighting is a Canon Speedlite 430EX. :rofl:Quote:
Originally Posted by Spawne32
I can't test it, because my other watercooling-stuff is not sill here. :(
it's cold wheather here in greece this days :) the ss was taken with the windows open i was ready to run Pi In the Highest clocks i can reache :)Quote:
Originally Posted by dnb#
Rad : 1 x Black Ice Pro 2
You're using an old version of CoreTemp that uses a tjunction of 85C for the E4300. Correct tjunction for E4300 is 100, so you will need to add 15C to those temps.Quote:
Originally Posted by Vatos_locos
Sorry for the bad news
Edit: later versions of CoreTemp will show the correct tjunction.
Cheers trouble2000 :)
bahahahQuote:
Originally Posted by stormshadow
Quote:
Originally Posted by SparkyJJO
i thought that it was the specific energy of pure watter was higher than a synthetic coolant
http://img57.imageshack.us/img57/342...stomdz1.th.jpg
The more i see people with black tubing the more i like it :D , black tygon i take it ???
lol.... i love it.... i realy like all black pcs!!!Quote:
Originally Posted by MrMick
The black tubing and fluid complements the black interior of the case.
Yeah, black is great! :up:
Now with new motherboard an two chipsetcoolers.
http://www.gravedigga.de/gravedigga/Temp/IMGP2875.jpg
http://www.gravedigga.de/gravedigga/Temp/IMGP2876.jpg
I'm pretty sure this is just black fluid. It has a different, duller "shine" to it than tubing. The rig funkflix post is black tubing.Quote:
Originally Posted by MrMick
I love your black OCZ ram cooler. Did you do it yourself? Spraying or by other means?Quote:
Originally Posted by funkflix
I was just about to ask the same thing - it looks awesome!
Thanks. I sprayed it black by myself. :)
Just black fluid :). Too much work and €€€ to change all the tubing :) I'll do it eventually in a few months :):yepp:Quote:
Originally Posted by MrMick
trouble that is a sweet setup. I like how you placed all the rads :P.
TKS! :up:
OMg . . .dude u rule . . .Quote:
Originally Posted by trouble2000
Funkflix: Very nice!
Here my rig while testing OC with 4GB DDR3:
http://www.abload.de/img/wakecw.jpg
unfortunaly 0.95 sais the same temp @ load @ idle 0.94 is indeed wrong but it is more stable 0.95 @ load is crushing all the time :( so both core temps 0.95 + 0.94 sais the same temp @ load i don't have any problem that's why i posted the uGuru 23*C @ idle buta when i will open the windows the idle temps is droping very much :)Quote:
Originally Posted by ~aoe~