Printable View
Nachthymnen,
Careful with your CPU voltage that seems really high voltage even on water, 1.44 in CPUZ equates to about 1.57 or more what are your temps?? Can you do an Everest Memory benchmark for bandwith I would love to see your results with the Cell Shock at those speeds.. Overall that is a really awesome OC I must admit I would love to run at 4.5 but My SH*T would melt.. Anyway, Kudos...
I'll second that Guacomole, what kind of VCORE were you running for those screenshots Nachthymnen? In anycase great job, very impressive clocks all around!
1.5v set from bios.
Never try with lower voltages.
For 4300mhz 3d benchable I need around 1,35v real.
This main has a huge v-drop:eek:
FSB testing with low memory clocks, just boot @ this speed:
http://www.pctunerup.com/up/results/...eenShot001.jpg
RAM testing, trrd 6 and P1/P2 enabled:
http://www.pctunerup.com/up/results/...1940_86748.jpg
A good AM3:
http://www.pctunerup.com/up/results/...2_aqua280k.jpg
Dam bro, I guess you are on water right? including NB and VRMs.
Yes, water, just really fast test,not my 24/7 setup for sure...saturday LN2 on CPU:DQuote:
Originally Posted by slim142
NB 1.6v ram 2.15.
Never try with low V-mem.
I would like to be sure to close the bench:p:
Wow, I expected less than 10 secs for 1M. Anyways good job.
hehe, not @ 4Ghz:p::DQuote:
Originally Posted by slim142
Maybe 11.3 is possible.:rolleyes:
Do you have Everest?? PM me and I can get it to you.. If my memory serves me correct Everest is the most accurate at giving you your actual V-core but I think Roger knows best on that.. Is that correct Roger isn't Everest the best accurate read out of V-core from the operating system?? Didn't you say you took a voltmeter to the board and that is what you found??? I can't remember for sure....
Are there any confirmed pencil mods for the evga 790i ultra board ?
So far, anything over 4 ghz on my qx9650 results in instability.
1800 FSB rock stable at an 8.5 multi.
Seems very suspect in bios or something.
Prime will crap out at anything else
I don't use it but I will try it today:up:Quote:
Originally Posted by Guacomole
If you break 10sec on 4Ghz I'll be extremly impressed, infact I'd amazed! Slim142 have you ever seen a 1M run under 10sec on 4.0Ghz before? Please send me linky if so because I'd be very interested in what his secret it!Quote:
Originally Posted by nachthymnen
10s @ 4GHz is practically impossible with the current CPUs.
I just want to start a I HATE JMICRON portion of the thread because of their imcompetence they have ruined e-sata and that is such a bummer.. I have a 1TB Seagate internal, RaptorXRaid0, and a 1TB Seagate external.. Everytime I turn on my external with e-stata my computer freezes and then the drive will not come up in the OS... But here is the thing if I disconnect the internal 1TB then my external e-sata works perfectly (which defeats the purpose), any suggestions here I mean besides the obvious JMICRON is a company that is completely incapable of making functioning hardware and drivers??? I HATE JMICRON, I HATE JMICRON, I HATE JMICRON!!!! Does anybody remember Silicon Image they had such a great prouct and then some God forsaken reason the retards from JMICRON took over and ruined esata.... Or maybe I am the retard and I just don't understand how to use the e-sata but I don't think so...
I apologize for offending anyone by using the name retard and offending any retards by associating them with JMICRON (which is more offensive than the previous)..
Im sorry, I dont know why I posted that :rolleyes:Quote:
Originally Posted by Roger_D25
Quote:
Originally Posted by BenchZowner
4.5Ghz will do it, aided by 8 or 12Mb of CPU cache... but it's a nice score on Nvidia based mobo
LOL:DQuote:
Originally Posted by Roger_D25
I think is not possible to take 10.9xx @ 4Ghz.
The best time I've see is an 11.2 sec:)
Good news for me. 100% estable at 1800FSB/1600DRAM. Will post the screenshot once I get home. BIOS 0701.
Multi: 8
FSB-MEM: Unlinked
FSB/MEM: No sync
FSB: 1800
Memory timing:
P1: Auto
P2: Auto
7-7-7-21 2T
All subtimings Auto (except for tRC 30)
Overvoltage settings:
CPU: 1.32500 (With LLC, gives out 1.38 in idle, 1.39 in load)
Loadline calibration: Enabled
PLL: Auto
VTT: 1.30
MEM: 1.86
NB: 1.44
SB: 1.50
GTL_REF0: Auto
GTL_REF1: Auto
GTL_REF2: Auto
GTL_REF3: Auto
http://img233.imageshack.us/img233/6...osforxsgj9.png
------------------
I am 100% estable Prime95 25.6 running for more than 12 hours. UNFORTUNATELY, my P1 & P2 since they are in AUTO, they seem to be disabled since Everest gave me 8848Mbs for reading ! But this morning before leaving home, I enabled P1 and P2 and left it running Prime25... we will see how it goes when I get back home.
So far, I love the board and the CPU. I still want to give 0702 a try as well as 703 between today and saturday night. Just to not to be left with doubts on my head
I think Im one of the few lucky Striker II Extreme Owners who did got a decent board. Never had corruptions and I been running this board since first day I got it with more than 10 BIOS updates done.
------
UPDATE#1: Just came home, turned on the screen and saw Prime failed on thread#1 :( I just gave my vdimm a boost from 1.86 to 1.88 since it might need more power to handle P1 and P2 enabled. We will see how it goes this time... UPDATE: FAILED
at what vcore in the bios?Quote:
Originally Posted by Broly
qx9650 = dead, 3/4 cores. Core1 alive
s2e = alive and strong
Final verdict?
S2e = champion
CPU= will die before. Heh so much for intel reliability.
Is that a RETAIL QX9650 with the warranty?Quote:
Originally Posted by Broly
Hey what do you guys think?
My system is 100% estable with P1 and P2 in auto but when I enable them, my system becomes unestable. I have tryied raising the vdimm by 0.02 (1.88) and also raising the vcore from 1.32500 to 1.33125 and prime still shows error.
With vdimm raised it shows core 1 failed and with vcore raised it shows core 3 failed. I am now trying with NB at 1.46 to see if this will solve anything. If not, then I will try with both vdimm and vcore raised and if it fails (hopefully not) with NB also raised to 1.46 and if nothing... moving on to 0702.
Oh men Im happy to be estable but with 8846 reading from RAM, im kinda pissed :(
A quick question fellas, i was taking my video card out and i scratched my motherboard by the video card, its very small and its white, i dont think it damaged anything, what do you guys think??
someone with QX9650 at 4GHz (400x10, 450x9) on SIIEx post your settings please ... GTL.