Info**

Printable View

Show 100 post(s) from this thread on one page

02-28-2011, 04:02 AM
andressergio

Quote:

Originally Posted by Ayru

Thats one of the worst chips ive seen on those forums... I thought i had a poor chip since i need 1.39v to run the chip @ 4.8 w/HTon but you need over 1.4 volt,

Most ppl can acheive 4.8 with like 1.37 vcore. Damn shame if you ask me . :shakes:

im using LLC1 man so other friends check back and please before doing such comment post 3hours of prime the new one at least :up:
02-28-2011, 05:21 AM
stasio

Quote:

Originally Posted by andressergio

im using LLC1 man so other friends check back and please before doing such comment post 3hours of prime the new one at least :up:

Sergio,maybe guy are from Intel and wont to give you new chip with 1.37=>4.8GHz :rofl:
02-28-2011, 05:26 AM
andressergio

Quote:

Originally Posted by stasio

Sergio,maybe guy are from Intel and wont to give you new chip with 1.37=>4.8GHz :rofl:

:rofl::ROTF::clap:
02-28-2011, 05:28 AM
andressergio

Quote:

Originally Posted by owikh84

Intel Core i7 2600K 5.0GHz HT ON (4C/8T)
Gigabyte P67A-UD7, F8X
2x2GB G.Skill RipjawsX 2200C7 @ 2133MHz 7-10-7-27-1T
2x MSI GTX580SLI, 930/4100Mhz
Corsair AX1200

Holy cow jump, 1.49v bios, 1.536-1.548v load. 1.512v idle

http://i458.photobucket.com/albums/q...wikh84/168.jpg

custom blend min 128k, 3200MB
http://i458.photobucket.com/albums/q...kh84/prime.jpg

ambient: 35C :x

thats great owikh84 :up: but be carefull that there's a guy with 10 POSTS named Ayru controlling our vcore's LMAO :rofl::rofl::rofl:
02-28-2011, 06:21 AM
owikh84

thanks sergio we could just ignore him for not showing proof of stability
02-28-2011, 07:27 AM
andressergio

Quote:

Originally Posted by owikh84

thanks sergio we could just ignore him for not showing proof of stability

the vcore police lol :rofl::ROTF:

great that prime mate :up:
02-28-2011, 09:28 AM
the_real_7

Quote:

Originally Posted by Leeghoofd

Nope it's a pure memtester in windows. You will have to run a few instances to eat up all the available ram. If the ram is unstable it will error out (logic)

I can hyperpi 32M al nite , yet the same ram clocks fail under HCI memtest, usually a slight bump in ram voltage stabilises it...

sounds good for ram I'm try out tonight for sure :D
02-28-2011, 09:49 AM
the_real_7

Quote:

Originally Posted by andressergio

the vcore police lol :rofl::ROTF:

great that prime mate :up:

Damn I must be on the s_ _t list to , as im using 1.460 to maintain 4.8 lol :p:
screw it im turn llc2 on and use stock voltage to make Ayru happy
02-28-2011, 03:41 PM
andressergio

Quote:

Originally Posted by the_real_7

Damn I must be on the s_ _t list to , as im using 1.460 to maintain 4.8 lol :p:
screw it im turn llc2 on and use stock voltage to make Ayru happy

:ROTF::rofl:
02-28-2011, 05:06 PM
stasio

Quote:

Originally Posted by andressergio

:ROTF::rofl:

Here is explanation:
http://www.xtremesystems.org/forums/...d.php?t=267412
Every 0.01 Vcore increased, you get 100MHz more! :shocked::ROTF::rofl:
03-01-2011, 03:48 AM
andressergio

Quote:

Originally Posted by stasio

Here is explanation:
http://www.xtremesystems.org/forums/...d.php?t=267412
Every 0.01 Vcore increased, you get 100MHz more! :shocked::ROTF::rofl:

wow stasio thats enlighting :ROTF::rofl::clap:

i saw that post couldnt believe it :rofl:
03-01-2011, 04:19 AM
Ayru

Quote:

Originally Posted by the_real_7

Damn I must be on the s_ _t list to , as im using 1.460 to maintain 4.8 lol :p:
screw it im turn llc2 on and use stock voltage to make Ayru happy

There is nothing wrong with using LLC2. Im using it right now and im stable as a rock 24/7 with HT on and 1.39 in bios.

better than having to sacrifice speed in order to have llc1.
03-01-2011, 04:25 AM
Ayru

Quote:

Originally Posted by andressergio

im using LLC1 man so other friends check back and please before doing such comment post 3hours of prime the new one at least :up:

Turn on llc2 then.
03-01-2011, 10:52 AM
MacClipper

Get ready you UD7 guys, incoming!

1st P67 B3 mobo seen around here. :D

http://i755.photobucket.com/albums/x...3/2b10fde5.jpg

http://i755.photobucket.com/albums/x...3/d89cab71.jpg

http://i755.photobucket.com/albums/x...3/4a175cbb.jpg

Slate wiped clean with fresh new F1 BIOS?

Well, looks like the stock F1 BIOS on the new B3 mobo is quite nicely matured for some overclocking, so far no strange quirks seen yet.

http://i755.photobucket.com/albums/x...3/95ef8606.png

http://i755.photobucket.com/albums/x...3/65f248e7.png

Nice! :)
03-01-2011, 11:00 AM
Eldonko

Interesting. Anyone know if B2 BIOS can be used on B3 and vice versa? Cant see why the BIOS would be different, it is probably the latest official B2 BIOS renamed.
03-01-2011, 11:21 AM
andressergio

Quote:

Originally Posted by Ayru

Turn on llc2 then.

why dont you do us a favour and you leave the thread you look a nice troll beside you need to learn lot of things and of course to treat ppl right

so dont post any crap again
03-01-2011, 11:22 AM
andressergio

Quote:

Originally Posted by Ayru

There is nothing wrong with using LLC2. Im using it right now and im stable as a rock 24/7 with HT on and 1.39 in bios.

better than having to sacrifice speed in order to have llc1.

show your stable settings then and stop talking
03-01-2011, 12:13 PM
l0ud_sil3nc3

Quote:

Originally Posted by Ayru

There is nothing wrong with using LLC2. Im using it right now and im stable as a rock 24/7 with HT on and 1.39 in bios.

better than having to sacrifice speed in order to have llc1.

quite being such a tool. . .

wheres your screenshot? oh ya you don't have one because your :banana::banana::banana::banana: isn't really stable.

sergio has been here for a lot longer than both you and I so show a little respect:shrug:

edit: after seeing your other post on vcore and multi, it makes much sense your a nub:rofl::ROTF::rofl::ROTF:
03-01-2011, 01:59 PM
OC Nub

Quote:

Originally Posted by Ayru

Thats one of the worst chips ive seen on those forums... I thought i had a poor chip since i need 1.39v to run the chip @ 4.8 w/HTon but you need over 1.4 volt,

Most ppl can acheive 4.8 with like 1.37 vcore. Damn shame if you ask me . :shakes:

Using llc2 allows you to run lower idle vcore, it looks better in a cpuz screen showing 4800mhz 1.39v vs 4800mhz 1.45v. However when you put the chip under load your vcore will go above 1.4v if you are using 1.39v bios and LLC2, yet you insult someone who's chip needs roughly the same vcore load as your chip because he chose to use a different LLC option. :shrug:

This is about having fun, learning, and helping others, and not about insulting people.
03-01-2011, 05:03 PM
the_real_7

Quote:

Originally Posted by MacClipper

Get ready you UD7 guys, incoming!

1st P67 B3 mobo seen around here. :D

http://i755.photobucket.com/albums/x...3/2b10fde5.jpg

http://i755.photobucket.com/albums/x...3/d89cab71.jpg

http://i755.photobucket.com/albums/x...3/4a175cbb.jpg

Slate wiped clean with fresh new F1 BIOS?

Well, looks like the stock F1 BIOS on the new B3 mobo is quite nicely matured for some overclocking, so far no strange quirks seen yet.

http://i755.photobucket.com/albums/x...3/95ef8606.png

http://i755.photobucket.com/albums/x...3/65f248e7.png

Nice! :)

Mouth watery , hope new egg send me notice so i can get one this month :yepp:
03-01-2011, 05:10 PM
andressergio

Quote:

Originally Posted by l0ud_sil3nc3

quite being such a tool. . .

wheres your screenshot? oh ya you don't have one because your :banana::banana::banana::banana: isn't really stable.

sergio has been here for a lot longer than both you and I so show a little respect:shrug:

edit: after seeing your other post on vcore and multi, it makes much sense your a nub:rofl::ROTF::rofl::ROTF:

thanks bud the first thing he did was insulting without proof of notha

Quote:

Originally Posted by OC Nub

Using llc2 allows you to run lower idle vcore, it looks better in a cpuz screen showing 4800mhz 1.39v vs 4800mhz 1.45v. However when you put the chip under load your vcore will go above 1.4v if you are using 1.39v bios and LLC2, yet you insult someone who's chip needs roughly the same vcore load as your chip because he chose to use a different LLC option. :shrug:

This is about having fun, learning, and helping others, and not about insulting people.

thanks mate i learnt LLC1 from you and its best LLC2 unstable and peaks really bad for 24/7 use guess for bench is ok, either way that guy insulting its really desapointing...makes me think of someone...mazda lol

cheers all :up:
Sergio
03-01-2011, 06:00 PM
OC Nub

Quote:

Originally Posted by andressergio

thanks bud the first thing he did was insulting without proof of notha

thanks mate i learnt LLC1 from you and its best LLC2 unstable and peaks really bad for 24/7 use guess for bench is ok, either way that guy insulting its really desapointing...makes me think of someone...mazda lol

cheers all :up:
Sergio

NP man, only friends have earned the right to insult, not this guy :D.
03-01-2011, 06:07 PM
maxxx

@MacClipper: so the boards are in Singapore already. Nice...
03-02-2011, 02:18 AM
Polypenko

Assume F1 new bios for the b3 stepping mb is in fact the old F7 from b2?
03-02-2011, 03:41 AM
andressergio

Quote:

Originally Posted by OC Nub

NP man, only friends have earned the right to insult, not this guy :D.

:rofl:

Show 100 post(s) from this thread on one page

***Official***Z68X/P67A-UD7 Club/Discussion/Info**

OfficialZ68X/P67A-UD7 Club/Discussion/Info**