Same chips as OCZ...but are you sure its warrantied to 3.5V? lol but I wish you luck :)Quote:
Originally Posted by Jessfm
Printable View
Same chips as OCZ...but are you sure its warrantied to 3.5V? lol but I wish you luck :)Quote:
Originally Posted by Jessfm
that was luckily only 256mb aka 40$ :)
yes thats very true.
TBH it may or may not have been the volts that killed it, since it was weak anyway, possibly it was just a coincidence
Got a package from oc.de with 6 big ones coming my way...
Welcome to Xtreme :)Quote:
Originally Posted by largon
And good luck with your memory .
jack you got them ?
Quote:
Originally Posted by enok
I use a cd-rom version of memtest86 v1.30
Test #7 is the hardest to pass with my VX too... it gives up 1-2MHz before #5 does.Quote:
Originally Posted by Shroomalistic
Shroomy, have you found AGP Freq and/or AGP Voltage has any effect on how high you can clock in MemTest or Windows with these modules?
Newegg just sent me the $32 crap, non-speed premium. Non UTT, so I'm going to have to RMA.. I suppose they figured I wouldnt be able to tell the difference between this and what I bought :shrug:
I just leave it at 67mhz for memtest. 71-77 can get me an extra 1mhz or more most of the time.Quote:
Originally Posted by Rabbi_NZ
I recall someone saying that he wanted to see a 3dmark at 265 or higher. Heres one at 274.
Yay and boo...
Got a pair of 256Mb AA4T with 50D chips today, one stick memtested straight upto 264 (3.5v). :cool: Problem is the other stick was D.O.A got some alarm signal when trying to boot at defaults, wierd huh.
Shroomy, nice results. :)
SHROM>
TRC should equal TRAS+TRP ;)
tras=5
+
trp=2
=trc of "7" for optiomal performance ;)
you should see a nice gain as TRC sets wait states for the ram cycle :)
nice fsb 270's are nice :)
I run 2-2-2-10-7-15... are you saying 2-2-2-10-12-15 would be better?Quote:
Originally Posted by choseone214
Quote:
Originally Posted by choseone214
Wasnt even looking at that. I leave tightest possible timings when burning in. Didnt realize I didnt change it back to 10.
Edit:
Never mind, you got me really confused now
I leave those at 15,16 or 14,16 with this particular ram. 10 wont get as high. Im going for highest 2,2,2 . I leave others at most stable point, usually auto.
Are you running a64 tweaker??
trc "bank cycle time" is a big timing much like cas as it sets timing cycles
Try and drop from 15 to say 12 and change tras to 10. Sorry if I've lost you, hehe
no im hearing ya loud and clear. When I go for my highest sandra mem score I will do that.
New 3D MArk world record with TwinMOS UTT ? is it possible? :slobber:Quote:
Originally Posted by pc ice
Sure if you include ocz VX sticks in the mix ;)Quote:
New 3D MArk world record with TwinMOS UTT ? is it possible?
But then again 2001 is so much cpu that you still need that killer fx@3.475-3.5ghz :)
wat refresh are you using? 4708 or 4196? or something lower
If my Bh6 does good ( 250) @ high volts, Ill have 1 good stick too !Quote:
Originally Posted by HermS
did you buy them from tekheads ?
Page me, might be able to help you out a little .
Deffinitly possible. I also got a stick that wouldnt run at its rated speeds. My bad stick is being sent out tomorrow FedEX. It should be back in about a week so i will know more then. I cant wait. I love virgin winbond.Quote:
Originally Posted by pc ice
lame, they changed the eta on the 512 sticks to 1-19, I was gonna order some and see what I got from newegg with their latest batch. Also, when you guys say you got this and this ram, could you say where you bought it from? ppl have been saying what sticks they got but not from where... I'm looking for a reliable 2x512 set myself.
newegg has the 512mb SP back in stock. Whos next to take a gamble?
me not :)
It looks like most of the 512 aa4t's are coming from Europe...
only 256 sticks @ newegg are pretty much guaranteed (the SP's at least)...