I have never used this program before. What should I use in it?
Printable View
I have never used this program before. What should I use in it?
LOLOLOLOL, guys, i can't believe it!
my damn board can do >300HTT !!!
i tested it today A LAST TIME, because i ordered GSkill PC4400 2.5-3-3-7 (1gig) and wanted to know, i i just made a failure and the board can do more then lazy 260HTT....yes it does :D
http://www.8ung.at/dresign/300htt.jpg
It this with 2x512 and is it 1:1? Bah just tell me all your settings!
Can someone link me to SuperPi as well? lol
lol, no, it's 3:4 ;) - 2x512mb....Quote:
Originally Posted by Catalan
ram = 210MHz (i just wanted to know max.HTT - because of my gskill-ram which are coming ;))
Well,
I got my DFI board tonight. Managed to change the chipset heatsink and I'm in the process of installing it on the mobo tray of my CM stacker.
I'll post the results of my 3200+ A64 mobile when it's up.
wahaha I just managed to archieve a small breakthrough with my 3200+ and a pair of 512MB Kingston Hynix D43.
Previously I couldn't even reach 32s when oc to 2.7GHz. Now it's done with 2.6GHz only. And yeah it's 2x512MB and Prime95 stable.
Looks like I don't need TCCD or Ballistix for now. :banana: :banana4: :banana: :banana4:
http://www.hkepc.com/bbs/attachments...s_a64_2606.gif
EDIT: Yeah it's on my DFI of course! :D
very nice score man! im at 2700mhz using a 3000 newcastle and the DFI board and my scores are 35 :( man those 1mb L2 chips realy shine. i dont care what people say i like the 1mb L2 over the 512 L2 they seem to have more power. what did you do to get that score?
peace perc.
Hey Perc, in fact it's the memory timing matters most for SuperPi, not the extra 512KB L2. If you like to see the powre of 1MB L2 you need some CPUmark99 in action. See this pic its self explainQuote:
Originally Posted by Perc
http://www.hkepc.com/bbs/attachments/liGZ_a64_2700.jpg
Are you guys hitting the high of clocks on air?
Here I took a sheet Ubermann posted and edited it alittle bit to my liking with stuff I use. Thought I might post it if someone wanted it.
Im going to be testing out about 4 different sets of BH5's various brands, and 2 different sets of PC4200 in the DFI, Geil and OCZ, to see how fussy it is. for the last week i've only been using my Crucial Ballistix in it @ tight timings 222 up to 260 and slacktimings and high FSB up to 300.
It's crazy such a good board and so fussy on memory.
why would anyone need a 512mb card? only some games use even 256. and the more powerful the gpu is the less memory needed
yo DCR the x800s can go on a much weaker cpu than the 6800s need, ive seen 14k on a 16pipe x800 with a 2700mhz xp-m
i cant wait till i get dfi i may be ordering today! pity i can only afford my budget adata.
Quote:
Originally Posted by ahfung
well im using bh-5 2-2-2 i dont know how much tighter i can make it? oh and yes im using 1T as well? but then again with the bh-5 i cant get 2700mhz i can only get 2550-2600mhz but even so that is the same mhz as your using to get that 32 in super pi?? oh well im not going to worry ill just keep plugging away im sure ill get some more out of this system as time goes on cause this mb suprises me more and more every day. think i may go to newegg and pick up a 3200 clawhammer and see if the grass is any greener on the other side?
@UGP
im using a stock mach1 "phasechange" my temps are about -4c underload. not that great of temps compared to some guys with thier -100c quadzupple cascade units but it gets the job done...
Yeah that is true.
Here is my most recent stable overclock for the time being.
I am going to post every overclock this way so you can see what settings I am using and if you have anything that you may see that could improve performance.
It would be nice if some people could post this way so we can see exactly what settings you are using and what the test results are in one picture.
I have some problem with the 4v modded bios.
I've a 430tp antec psu, sense wire modded.. so I can get 3.8 in 3.3 rail..
when i put 3.3 by bios the system boot, shows me the lanparty logo and then reboot. If I put 3.2 all is ok..
i don't know what i've to do ...:(
If you read my post you'll see that I was runing 2.5-4-4-10. These timings are more relaxed than the 2.5-3-3-10 you say.Quote:
Originally Posted by ugp
:(
I resolved my problem :DQuote:
Originally Posted by OSKAR_WU
ehe :banana: :banana:
:stick: How?
I have the same one.....
1 . CPU VID control must set to voltage other than Auto
if you set auto the mobo reboot when vdimm in over 3.2V
ciao
Alessio
Does anyone have DFI temp readings in windows with a Mach 1 or Mach 2 (R507)??
Thanx, I have a homemade kit and ik get very strange temps..
This memory battle keeps going on and on for me:(
yeah? you like those 3200 rev2 memorys or what? i just bought a pair of eb3500 and im starting to regret it (i havent even got em yet) after reading about those 3200 rev2 series ocz. how are they working in that mb for you? i take it your having your memory problems with the ocz or what? just asking cause i have a friend who was going to buy eb series but now he wants to look into these ocz 3200 rev 2 memorys....Quote:
Originally Posted by ugp
thx perc,
did you read the GSkill thread yet?Quote:
Originally Posted by Perc
Some amazing scores there aswell,
and a damn cheap price if you ask me! :toast:
send it back the 3500eb (i had it a while back) dont even open it switch for the 3200 rev2Quote:
Originally Posted by Perc