The Phenom II List of Overclocks

Printable View

Show 100 post(s) from this thread on one page

02-12-2009, 02:04 PM
chew*

Quote:

Originally Posted by Zeus

I will try with more NB clock. ;)

Only mentioned it because you said you crashed before, that was probably why, actually why i suggested cinebench. Then i was gonna tell ya to up CPU NB VID.
02-12-2009, 02:13 PM
Zeus

Quote:

Originally Posted by chew*

Only mentioned it because you said you crashed before, that was probably why, actually why i suggested cinebench. Then i was gonna tell ya to up CPU NB VID.

I see, thanks for the advice. I have to grow into it again a bit. I haven't touched AMD since my Opteron 146.

Here she is at 2.6GHz NB clock though, haven't touched the voltages yet. I don't plan to untill i strap on the waterblock.

http://img.photobucket.com/albums/v6...ebench26NB.jpg
02-12-2009, 02:38 PM
Lightman

Quote:

Originally Posted by Zeus

I see, thanks for the advice. I have to grow into it again a bit. I haven't touched AMD since my Opteron 146.

Here she is at 2.6GHz NB clock though, haven't touched the voltages yet. I don't plan to untill i strap on the waterblock.

http://img.photobucket.com/albums/v6...ebench26NB.jpg

Those are very decent clocks on stock volts. considering you're running Vista x64.

My chip is doing 3.6GHz OCCT 1h stable, but with less on NB though. I can get 2.4GHz NB on stock volts..

When you're putting water on it??
02-12-2009, 02:56 PM
Zeus

Quote:

Originally Posted by Lightman

..

When you're putting water on it??

Actually it's Windows7 64 bit. ;)

I'm gonna put it under water as soon as my project is ready for it: http://www.xtremesystems.org/forums/...d.php?t=216871
02-12-2009, 03:20 PM
Lastviking

Sry Lightman its looks like you are second with Air on hwbot now ;)

What about under 16s with Air in super pi1m with Phenom II 940BE
I like my True Black its work good with slow 1200rpm fans to :D

http://www.bandwidth.se/imgs/nouser/...rpf1043eaf.jpg
02-12-2009, 03:54 PM
fizur2002

Quote:

Originally Posted by chew*

720 BE AIR Result without dropping HT/NB speeds

Stepping
http://members.cox.net/nfridenti/720BE.jpg
http://valid.canardpc.com:80/show_oc.php?id=506108

http://valid.canardpc.com/cache/banner/506108.png

What you have there is the exact same stepping and week older than my 940BE mines a 0849CPMW
02-12-2009, 04:20 PM
richierich

Quote:

Originally Posted by chew*

720 BE AIR Result without dropping HT/NB speeds

Stepping
http://members.cox.net/nfridenti/720BE.jpg
http://valid.canardpc.com:80/show_oc.php?id=506108

http://valid.canardpc.com/cache/banner/506108.png

DAMN NICE!!! What are your temps like @ that clock?
02-12-2009, 04:27 PM
Stuen4y

It looks like I'm fifth in hwbot on air with that Pi score:
http://img218.imageshack.us/img218/7...b130046xi6.jpg
And second with this validation: 4351.24MHz @1.536V.
My happy Friday 13th :D
02-12-2009, 05:06 PM
chew*

Quote:

Originally Posted by richierich

DAMN NICE!!! What are your temps like @ that clock?

No clue, no accurate way to measure it, multimeter/ K type probe on heatpipe as close as I can get to center of IHS says 23-24C.

With 940 BE my software temps are 10-15C higher with this cpu my ambients were 22 to 23C and cpu reported 16C via AOD, gigabyte easytune is also far fetched.
02-12-2009, 05:16 PM
cdawall

use realtemp and add 20C to the temp to get a semi accurate tmep
02-12-2009, 06:47 PM
chew*

Quote:

Originally Posted by cdawall

use realtemp and add 20C to the temp to get a semi accurate tmep

Eh why bother, I'll just stick it under DI/LN2 and temps wont be a concern.
02-12-2009, 09:23 PM
Daveburt714

Quote:

Originally Posted by Stuen4y

Forget the stock v's, go forward for 1.4-1.45V and test it for stability. :)

Well, I've had a couple days to play with this new 940 (0852 BPFW) and I'm actually amazed at how different it is compared to the one in my sig.

The strangest thing is the CPU voltage (Stuen4y :))... My week 50 loves volts and actually OC's about 100mhz better than this one, but it needs ~1.57 to run stable @ 3.85.

This chip won't even post with voltage higher than 1.5 in bios and I'm pretty sure with a little more patience it will do 3.7+ with v's well under 1.475. :D

The IMC is the same way, both seem to top out around 2700, but the 0850 needs 1.3v to get there and the 0852 will do it on 1.25v (more v's don't seem to help much on either chip)...

Needless to say, I still have alot of tinkering to do. I just found the huge voltage differences kind of odd. :shrug:

Has anyone else with 2 940's noticed this big of a difference or am I the only one goofy enough to buy another one when I had a decent clocker to begin with... :p:

When/If I get tired of running water I get the feeling the week 52 would be the better chip. It certainly runs alot cooler overall.
02-12-2009, 09:39 PM
chew*

I'm waiting for week 01 chips to spin out, 01 has always been good to me. I could let people in on a secret as to why but I don't feel like dealing with disbelievers as I did in the stepping thread.....
02-12-2009, 09:47 PM
msimax

Quote:

Originally Posted by chew*

I'm waiting for week 01 chips to spin out, 01 has always been good to me. I could let people in on a secret as to why but I don't feel like dealing with disbelievers as I did in the stepping thread.....

do tell
02-12-2009, 09:51 PM
Daveburt714

Yeah *chew, please do tell.. :D

They had 5 "0901"'s at Microcenter when I bought this chip, but I passed because the serial numbers were in the 903xx's...
02-12-2009, 10:18 PM
chew*

Rather simple, all machines wear out with time and need to be recalibrated, retooled etc etc. This is usually done like clockwork based on a maintenance schedule.......Do the math.
02-12-2009, 11:10 PM
FoxRacR17

Quote:

Originally Posted by chew*

Rather simple, all machines wear out with time and need to be recalibrated, retooled etc etc. This is usually done like clockwork based on a maintenance schedule.......Do the math.

I'M A BELIEVER! :worship::worship::worship::worship:
02-13-2009, 07:16 AM
charged3800z24

Quote:

Originally Posted by chew*

Rather simple, all machines wear out with time and need to be recalibrated, retooled etc etc. This is usually done like clockwork based on a maintenance schedule.......Do the math.

Makes perfect sense to me.:yepp:
02-13-2009, 09:47 AM
Smartidiot89

Makse sense thanks Chew* :D
02-13-2009, 10:40 AM
HondaGuy

Quote:

Originally Posted by chew*

I'm waiting for week 01 chips to spin out, 01 has always been good to me. I could let people in on a secret as to why but I don't feel like dealing with disbelievers as I did in the stepping thread.....

Just picked up one today....0901APMW, just shutting down and change'n chips......
02-13-2009, 10:59 AM
Smartidiot89

I am seriously having issues with my Northbridge :confused: When it goes over 2100mhz it doesn't like me at all and poof its unstable no matter how much voltage i press into it. Abit of a dissapointment, considering selling this CPU and getting an x3 720BE or something instead:ROTF:
02-13-2009, 11:36 AM
Sgt.McRuff

Hey smart. Are you changing the cpuNB-vid voltage for north bridge OC which is in HEX?
02-13-2009, 11:41 AM
FoxRacR17

Quote:

Originally Posted by HondaGuy

Just picked up one today....0901APMW, just shutting down and change'n chips......

Do let us know your results with this chip :yepp:
02-13-2009, 11:44 AM
chew*

Now that I told you my secret.

all your 0901 CPU r belong to me

Seriously at least leave one under 0050 batch 0901 for me to grab :p:
02-13-2009, 11:51 AM
Final8ty

Quote:

Originally Posted by chew*

Now that I told you my secret.

all your 0901 CPU r belong to me

Seriously at least leave one under 0050 batch 0901 for me to grab :p:

I think you have had quite enough CPUs already. :D

Show 100 post(s) from this thread on one page