Printable View
Hey guys,
I have just received my Commando from Newegg. I am having big trouble with installing Windows XP.:mad: The PATA DVD-rom cannot read the install disk and it says "CDBOOT: Couldn't find NTLDR". But it works fine on the other computer I have. The SATA hard drive is set to IDE mode, the PATA DVD-rom is set as the 1st boot device. All the other settings are by default. I tried BIOS 1404, still not work.:shrug:
Can somebody help me?
[deleted, posted P5W DH problems in wrong thread]
But funny that the problems are the same :)
Weird, have you tried a different windows XP cd at all ?Quote:
Originally Posted by superray
My problem solved. Well, not actucally solved because the JMicron controller still does not work properly. But I managed to install Windows XP using an external USB DVD-rom.
1404 BIOS misreports POST CPU speeds but it o'c OK nonetheless, Vcore 1.475V BIOS.
9 x 401
http://i173.photobucket.com/albums/w...75V_Stable.jpg
8 x 450 (+15C offset to core temps to match Coretemp 0.95)
http://i173.photobucket.com/albums/w...75V_Stable.jpg
alo
a friend of mine has this board Commando and a Q6600 just bought and is having alot of troubles.
can´t pass above 365FSB only reboots and blue screens and the cpu makes for sure more than that, anyone have similar problemas?
the previous cpu was at 400FSB and the ram is the same TeamGroup Elite at ddr1000 4\5 , so at first sight we think that may be a board problem.
anyone with Q6600 can post screens of the bios options to see what is wrong? the bios we is using is 14\04
thanks
Tell him to manually set his voltages ( NB, FSB, SB ), because "Auto" stops being correct/effective over 350 or so FSB.Quote:
Originally Posted by jpcastro
If he is using manually set voltages, let us know his settings so we can check if there's something wrong.
thanks for the quick response, he says that already try that but to make sure that there isen´t anything wrong this are the bios settings at the moment:
http://img177.imageshack.us/img177/1...argexe0.th.jpg http://img177.imageshack.us/img177/3...argezk4.th.jpg
http://img177.imageshack.us/img177/7...argefy1.th.jpg http://img442.imageshack.us/img442/9...argeks7.th.jpg
once again thanks for any help!
Try with:
NorthBridge Voltage = 1.65V
Static Read Control = Disabled
Quote:
Originally Posted by BenchZowner
hi, it seems that work´s thank you very much for helping :) :clap:
my friend can boot now at leest 450FSB, once again thanks :up:
Glad it worked :)Quote:
Originally Posted by jpcastro
Have fun testing the CPU and good luck on getting good numbers ;)
New BIOS guys, v1501 ( click to download from Asus's super fast FTP :p: )
Has anybody tried using the new 1501 bios for the Asus Commando.
When I was using the 1404 bios my idle temps were 18° to 22° at stock speeds, using Everest to monitor temps, when i updated my bios to 1501, my idle temps went up to 32° to 35° still at stock speeds.
But my core speeds are the same (using CoreTemp)before and after the update.
Is this normal? because now i don't know which temp to follow.
The changlog for this new bios mentions that it fine tunes the cpu temp algorithim.
1404 temps were too low to be realistic so 1501 seems to be closer to reality. Are POST speeds with quads now correctly reported with 1501? Haven't got the chance to update my set yet.
Sometimes the reported speed is correct sometimes it's not.Quote:
Originally Posted by MacClipper
Looks like it can't properly detect the Multiplier changes ( if any ).
I've also had a nice bug where the mobo reported the Quad to be running at 12.69GHz :D
thanks for the info guys... here's a sample of my current temp...
http://i191.photobucket.com/albums/z...08_21_2214.gif
So the latest BIOS still did not fix this bug?Quote:
Originally Posted by BenchZowner
I did not notice any change on the temps with the new BIOS
What are the the best voltage settings for max fsb i can boot at 500 but any higher and it crashes. All voltage settings except Vcore en Vdimm are at there lowest settings. and a new bios din't helped i am running on a 1501 bios. i am using a E6600
http://img70.imageshack.us/img70/855...me95eh9.th.jpg
simple setup:
cpu vcore: 1.48v(BIOS), 1.42(windows idle), 1.37(windows loads/ stressed)
ram voltage: 1.97v(BIOS), 2.02v/ 2.00v(over volt. in windows)
fsb termination volt.: 1.40(BIOS), 1.42v/ 1.41v(over volt. in windows)
NB volt.: 1.45v(BIOS), 1.50v/ 1.51(over volt. in windows)
SB SATA: 1.55v(BIOS), 1.55v(windows idle/ loads)
SB volt.: 1.075v(BIOS), 1.09v(over volt. in windows)
RAM: 5-5-5-15 2T, 1:1
speed: 426Mhz/ ddr2 852
ps: its aint superb result compared to ya all :p
has anyone tried running this mainboard with 4 gig of ram? my commando only find 3 of my 4 gig of ram (4x1 gb modules)
x64?
The good:
I think I've gone as far as i can with this set up.(rig in sig ) (347x9) 1.425Volts and prime stable, But my temps are through the roof at 90deg ( room 20 ) :eek: - this can't be good.
The bad:
I think my setup is holding me back. is the chip I got any good .?
on the chip it sayes:
q6600
SL9UM malay
2.4Gnz/8m/1066/058
L645G253
It's an old one
I know my chip is as bent as a banana on the IHS, and I could get more from it if I wet in dry'd it.
The Ugly:
Got to be the Heat sink I'm using !
Any help you guys could give me I'd be greatful of. will take screenies if it helps.
Thanks
no one can give me advice ..???