Printable View
hey gs tech what is the best tref for a starting point?? i am useing 1552 15.6us for now it works ok. i am having alot of trouble getting past 260ish using your settings and only really stable at stock speed 3-4-4-8 @ 250mhz can you give some advice and what bios is optimal for this ram?
________
Weed
Well this is my first post in this forum so i,ve giving some resutls here.
I,ve done some 3dbenching with my G.Skill 2GiB PC4000 and I managed to get this stable. I,ve recently got this config so the score and so on might not be@it's best. Everything is stock cooled. Im just waiting for my waterblock to arrive.
http://files.upl.silentwhisper.net/u...4423dmarks.JPG
Does this help at all??
My settings are 285*9 is at 2.6V | LDT 3 | core 1.45 @ 110% | LDT V 1.5 | Chipset V 1.6
If I lower to 280*9 I can use LDT 4..
Both of these are 200 1/01 so no dividers in this.
http://img368.imageshack.us/img368/8944/2859wg.jpg
I forgot to mention.. I am going H20 as of today so I may be down for a day or two while I prep and test then begin benching. I am hoping to go above 300 on H20 but my CPU may be holding me back. I am going to order a new 3000+ hoping to get one that will get me above 300 though. Although I hope this little sucker can get me to 300 at least. Either way this turned out to be a good little processor.. too bad I will have to retire it. LOL
Im getting memtest errors @250 3-4-4-8 but 3d is stable it seems.
Which test are you getting errors in? Run test #5.. if it is a memory issue, then that is the indicator. Anything else usually points to other hardware/software. Also, what are your system specs?
Hi, me with my gskills 2gb pc 4000 have not succeeded has overcome the 255 . :(
Above the 255 memtests test 5 me for a long time of the errors to the second passage ..... I have tried another cpu but the result it doesn't change.
Made test with various bios ...... I think is the unlucky rams ...
Thing done think of it?
A643200+Winc*DFInf4ultra*F1-4000USU2-2GBHZ*X800XL*SB Audigy*2x80 hitachi 7k250 sata*EnermaxEG495
Thanks for the help :)
I have had the best luck with the 704-2BTA bios on the DFI NF2 Ultra D.. On the 623 and 510 bioses I had problems going above 250. Mind you that the 704-2BTA is not an official bios and can void your warranty. That said, we are overclocking so by nature we are just one big voided mess anyways. :)
If you read my sig, you can see what I have my voltages set at.. also what LDT are you using? If you are trying x4 it may not work. I just got lucky and I can run my memory at the settings they are at without dividers etc.
I really cannot go back and check any of my settings in detail anymore becuase I am in the process of setting up my rig for watercooling. I have to wait until at least Wednesday before the GPU water block arrives, I was hoping to be up and running at latest this weekend but I decided at last minute to include the GPU in the mix as well so I am down for six days. :(
many ppl are asking about 3D score and divider; here is my result, i am runing 32M now, the same ram setting results error on 32M, need to adjust a bit
http://img13.imagevenue.com/loc24/th_8e2_100_3477.JPG http://img22.imagevenue.com/loc24/th_505_100_3478.JPG http://img44.imagevenue.com/loc24/th_5e4_100_3479.JPG http://img40.imagevenue.com/loc24/th_130_100_3480.JPG
http://img111.imagevenue.com/loc24/t...2723448_01.JPG http://img46.imagevenue.com/loc5/th_...2723448_02.JPG
Blast it! You have that Opteron 146 I have been trying to find!
Quote:
Originally Posted by demonR6
hheeeeeeehee, i have one 144 and one 146......
very hard to find... i asked many ppl to help me on this....
Lucky you, I am on a wait list at five different places and I may have to sell one of my lungs to buy it once it arrives..
i need to change TWTR to 2.
if set to 1, 32M can't pass
http://img16.imagevenue.com/loc115/t...2723448_03.JPG
I have tried the ls Bios 704-2BT A , but I don't go it has more than 255 and I
this is the limit of the ies ram ......
I think that thing done recommend me??
thanks
With either BIOS (623-3 or 702-2BT) one stick doesn't pass 255 and the other doesn't pass 265, so I am stuck at 255. I tried both slots (orange and yellow and in yellow I can't pass 255 with any of the sticks. My CPU reaches 310 stable.
Quote:
Originally Posted by demonR6
Ill do that and post my specs on sunday.. i work too damn much..
I can't get past 255 either on memtest #5. Increasing the voltage didn't help either. I'm running it on stock timings. Any suggestions?
MSI Neo4 Platinum, Venice 3000+ E6
Quote:
Originally Posted by infiniti029
Well @250 with timings relaxed 16hour run on test#5 571 pass 51 errors.
Abit AN8-SLI
OCZ520w
3800x2 Toledo
would you say this ram is not able to run @ what its rated for? I should get no errors im assuming. Ive tried all the way up to 2.8v and of course no help.. should I return them or rma them through g.skill? I got em from the egg
in your case, i'd say yes.
mine seems pretty stable at 250 with stock timings, but i really can't go much higher. this ram has been pretty dissapointing thus far. plus i've read other people not being OC much with these :(
I,ve tried some settings this weekend, and I was able to get it stabile in 265mhz@test #5, it passed like 20 times with no errors. Then I tried if it was prime stabile etc and it was.
I,ll post a picture with timings,n :banana::banana::banana::banana:=D
http://files.upl.silentwhisper.net/u...imestabilt.JPG
The memory seems to become very very hot, if you have active cooling on them 270 shouldn´t be a problem to pass.
P.S I know there is a program called SP2004 GO that stress test's the memory in windows. Does anyone know where I can download it? :woot:
from the egg.. :slapass:
RMA Total: $253.00
Restocking Fee: $37.95
bah :slobber:
If you tell a support person on the phone to wavier the restock fee they will.Quote:
Originally Posted by JCGhz
here's my cpuz, and a64 tweaker settings. any suggestions on how to get this to OC past 255?
linky
Quote:
Originally Posted by infiniti029
Try my settings, they are on the other page(5) :toast:
Mine seems to be memtest #5 stable @245 very relaxed timings... im still returning them. My abit an8-sli is a pretty solid mobo but i think im gonna go with a dfi cause the bios settings more plentiful.
I'll definitely be calling newegg support ..screw that restocking fee.. its frikkin defective.