Page 1 of 21 123411 ... LastLast
Results 1 to 25 of 511

Thread: G.SKILL F1-4000USU2-2GBHZ REVIEW & DISCUSSION

  1. #1

    G.skill F1-4000usu2-2gbhz Review & Discussion

    Hi everyone in XS
    i am the new U.S G.Skill Technician
    if everyone has any question about G.Skill product, feel free to pm me

    my 1st test report post in XS is 2GBHZ

    kakaroto had posted the info of the 2GBHZ, but allow me to repeat again

    * Package : 2048MB kit (2x1GB) dual channel pack
    * IC Spec : Samsung UCCC
    * CAS Latency : 3-4-4-8 (PC4000)
    * Test Voltage : 2.6~2.8 V
    * PCB Board : 6 Layers PCB
    * Speed : DDR 500MHz (PC4000)
    * Type : 184-pin DDR SDRAM
    * Error Checking : Non-ECC
    * Registered/Unbuffered : Unbuffered
    * Quality Control : Comprehensive rigorously tested in pair at dual channel environment
    * Warranty : Lifetime

    I was going to post the pic of tested ram, however, G.Skill Taiwan isn't send me the digi cam yet, and i forget the bring it from Taiwan.......... sorry eveyone.

    also i haven't find any good free space for uploading the pic file... sry for small pic, please click it to view the large pic

    my test system is
    CPU: AMD 4800+ 0513TPMW
    Motherboard: DFi NF4 U-D bios 0510-1
    OS: Windows XP 32bit

    some tests had post by kakaroto, the main force for this test will be in max overclocking in 32M and SP2004

    DDR500 3-4-4-8


    DDR520 3-4-4-8


    DDR540


    DDR550


    DDR560


    DDR560 EVEREST


    DDR560 Sandra


    DDR560 SP2004


    DDR564 32M


    DDR564 Sandra


    finally, DDR570


    2GBHZ overclocking is around 270~280 with very low voltage just like kakaroto stated. this is my 1st review posted in XS, if i made any mistake, please tell me. thank you
    Last edited by GSKILL TECH; 10-31-2005 at 10:08 PM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  2. #2
    Xtreme Enthusiast
    Join Date
    Dec 2004
    Location
    Atlanta
    Posts
    813
    Nice report and welcome to XS

  3. #3
    Xtreme Addict
    Join Date
    Nov 2004
    Location
    Brighton, UK
    Posts
    1,019
    the g.skill 2gb sets are looking more tempting every day, might have to join in the mayhem. Very comprehensive report, i'm sure bachus will thank you for the 32m, he seems to have it drilled into everyone now and welcome

  4. #4
    Corsair Components, Inc.
    Join Date
    Dec 2003
    Location
    San Francisco, CA
    Posts
    5,066
    Welcome to XS, G.S Technician!
    Very nice report and thanks for sharing it

    btw, you have a PM...
    I work for Corsair Components, Inc.

  5. #5
    Xtreme Member
    Join Date
    Jan 2005
    Location
    Sweden
    Posts
    463
    nice review mate

    how much is a pair?
    E8400, P5Q-E, Crucial 2x2GB , XFX 8800GTX , Corsair HX620W
    D-TEK Fuzion, MCW60, Thermochill PA120.2, MCP655

  6. #6
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Calgary, AB
    Posts
    2,252
    Congrats on being a new tech They sent you from Taiwan to the US? That's quite a trip heh.

    Nice review btw, this RAM looks promising.
    MB Reviewer for HWC
    Team OCX Bench Team

  7. #7
    Xtreme X.I.P.
    Join Date
    Jan 2003
    Location
    Huntsville, AL
    Posts
    5,676
    Welcome to XS
    24/7 Work & Play Rig
    Gigabyte X58A-UD5, i7 920 @ 4.56ghz 1.48v 21x217, G.Skill PI 12Gb 8-8-8-24-1T 1.56V @ 1736Mhz
    EK Supreme HF P1, Dual EK DCP 4.0 Pumps and EK Res, XSPC RX360 & RX240 w/ 1850rpm GT's
    Sapphire HD 4870 1Gb @ 810/1020mhz, 2x Dell 2407, 2x 1Tb WD Black SATA3, 2x 2Tb Hitachi 7k2000
    Cooler Master ATCS 840, Corsair 750TX PSU, running OSX 10.6.3 & Win 7 64

  8. #8
    Xtreme Enthusiast
    Join Date
    Dec 2004
    Posts
    528
    WELCOME TO XS !!!!

    GJ there , Im so torn between Gskillz and Ballistix and now OCZ has new ram around the corner too . Damn these choices to hell . ARRGHH I hate being a Libran .

  9. #9
    thanks everyone.

    the price in newegg is 255 + shiping and tax
    in digi4me is 270 + shiping and tax
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  10. #10
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Lawrence, KS
    Posts
    207
    Wow...280 1:1? That pulls 1:1 speeds better than my 2x512mb redline...may have to sell this and get that 2gb helps in BF2 as well hahaha double bonus.
    Full Metal Alchemist

  11. #11
    Xtreme Member
    Join Date
    Mar 2004
    Location
    NYC and Pereira
    Posts
    150
    Welcome G.S Technician and thanks for the GREAT deal of HELP you gave me with the 1GBLE . This guy is great.
    LP UT NF4 ULTRA-D
    OPTY 165 @ 2.9ghz/1.39v air!!! primestable
    T.T BIG TYPHOON
    Ballixtix z503 2x1GB @ 264
    1xRAPTOR WD740
    2X WD800 HD RAID
    EVGA 7800gt
    X-fi Xtrememusic
    PIONEER DVR-108
    OCZ POWERSTREAM 520
    DELL 2005FP LCD
    ANTEC P160WF Case

    http://www.heatware.com/eval.php?id=41000

  12. #12
    Hiding from the cops and people I ripped off
    Join Date
    Jun 2005
    Location
    In Bed
    Posts
    6,826
    Nice! WELCOME TO XS. I hope to see more!

  13. #13
    Bandwidth Freak
    Join Date
    Dec 2003
    Posts
    971
    You are most welcome here. You're first testreport looks good. Very nice OC

  14. #14
    Xtreme Addict
    Join Date
    Dec 2004
    Location
    The Holy Land
    Posts
    1,242
    to XS !

    and your first review was super
    Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
    Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
    Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|

    RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
    2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
    Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
    Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1

    Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX


  15. #15
    Xtreme Member
    Join Date
    May 2005
    Location
    Somerset/Cardiff (UK)
    Posts
    221
    Quote Originally Posted by |3ourne
    GJ there , Im so torn between Gskillz and Ballistix and now OCZ has new ram around the corner too . Damn these choices to hell . ARRGHH I hate being a Libran .
    not to throw a spanner in the works even more, but ive recently been informed there will be a geil product in the 'performance 2Gb' sector , i should have a review in a few weeks i hope.

    targ
    University funded Phase unit in production... Done

    Time to start working on more interesting Phase ideas

  16. #16
    Registered User
    Join Date
    Sep 2005
    Location
    Lisboa - Portugal
    Posts
    17
    Your post/review made me order one kit...
    You can tell your bosses your starting to earn your salary...

    []
    8400 @ X48 @ 4.7
    4GB Cell Shock Micron D9 @ 1250
    8800GT Superclocked
    Watercooled

  17. #17
    Quote Originally Posted by Zeppelin
    Your post/review made me order one kit...
    You can tell your bosses your starting to earn your salary...

    []

    heheeeee
    I think so too


    tomorrow i might post more 2GBHZ OC on different CPU platform such as 3000+ and FX57
    Last edited by GSKILL TECH; 09-27-2005 at 01:08 PM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  18. #18
    Xtreme Legend
    Join Date
    Jun 2005
    Location
    Taipei, Taiwan
    Posts
    2,345
    good UCCC Chip

  19. #19
    Xtreme Enthusiast
    Join Date
    Dec 2004
    Posts
    528
    Quote Originally Posted by targ
    not to throw a spanner in the works even more, but ive recently been informed there will be a geil product in the 'performance 2Gb' sector , i should have a review in a few weeks i hope.

    targ

    GRRRRRRRRR I hate you !!!!!!!! j/k
    Even better , more choices for the end user. I always liked geil , ever since the geil golden dragon days. I had a 1 gb kit which is going strong still , goes upto DDR500 and its DDR400 specs. Geil has never disappointed me .

    That being said , Gskill is my newest latest hottest mistress .

  20. #20
    Xtreme Enthusiast
    Join Date
    May 2004
    Location
    San Diego, CA
    Posts
    761
    Just ordered me some

    intel i7 3770k 4.40GHz
    ASUS Maximus V Extreme
    EVGA GTX 680 FTW
    16GB GSKill 2400MHz
    (1) OCZ Vertex 3 60GB SSD
    (1) Samsung 840 Pro 256GB SSD
    (1) 1.5 TB WD Caviar Green SATA
    Sound Blaster X-Fi Titanium Fatal1ty Professional
    Corsair 700D
    Corsair AX850
    Water Cooled (EK blocks on CPU and GPU, TA 120.4, DDC-1+ with XSPC ResTop)

  21. #21
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    918
    tbh the OCZ 2gb is looking better

  22. #22
    Quote Originally Posted by stealth17
    tbh the OCZ 2gb is looking better
    IC is totally different ^^
    and price too

  23. #23
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,375
    nice results

  24. #24
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    918
    Quote Originally Posted by guess2098
    IC is totally different ^^
    and price too
    ahh these are these?

    http://www.newegg.com/Product/Produc...82E16820231021

    might end up selling my PDP 2gb!

  25. #25
    This time I use FX57
    motherboard is the same one i use last time DFi NF4 Bios 703-1
    FX57 is faster than 4800, but its memory controlor is not as good as 4800.



    DDR560 3-4-4-8 32M



    Sandra, the memory bandwidth is 200MB/s higher than 4800+
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

Page 1 of 21 123411 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •