Xtreme Twinmos Memory!

Printable View

Show 100 post(s) from this thread on one page

01-02-2005, 05:42 AM
MrQ3W

Quote:

Originally Posted by tictac

yeah TwinMOS memory need proper burn in for quite sometimes to perform well :toast:

they are not properly burnin in factory :rolleyes: :slap:

Laugh all you want but they only did 230MHz when I got them. Some RAM has been proven to gain from burning in so it is not just a myth.

the_n00b<:o): too early stick.
01-02-2005, 05:57 AM
celemine1Gig

Quote:

Originally Posted by tom_ed

Hi,

Just read this thread and i have unearthed my old twinmos 256mb chips. Stepping is:

03254
TMD7608F8E50D

Ill test them a little later, but they do have the two dimples on each chip. does that mean they are winbond?

Your Twinmos RAM has Mitsubishi Chips on it. Test it, but it'll never perform like Winbond. ;) I bet it doesn't have the two dimples in the middle, but one half dimple in the middle of the lower edge of the chip. :)
01-02-2005, 07:53 AM
tom_ed

well heres a pic:

http://img159.exs.cx/img159/5383/p10100209au.th.jpg

i think it has 2 large dimples on the chips. testing now...
01-02-2005, 08:39 AM
Revv23

Quote:

Originally Posted by the_n00b<:o)

gonna check later.. but heres the cpu-z spd table..
maybe I will buy a booster, but I dont know if it works on my is7-e
:stick:

it works but the VVT track gets all out of whack so the more volts dont really help much...

tom: that looks like winbond to me buddy, start cooking them and let us know how it goes.
01-02-2005, 08:52 AM
hipro5

Hi there guys and HAPPY NEW YEAR...... :toast:

Now........Testing those two modules I was quit amazed I could say...... :D

They ACT like BH-5 modules BUT COLDER.......on an INTEL rig....... ;)

With 3.2Vdimm(provided by the DDR Maximizer - clean power - :D .....they reached over 240MHz at Cas 2 - 5 - 2 - 2.........NONE CH-5 chips works at those settings on an INTEL rig so I believe that they are NOT equiv. to CH-5 chips........ ;)

Twinmos 2 x 512MB UTT on an ABIT AS8 Mobo with the 865 chipset.......at 3.55Vdimm....

PAT = Disabled

Timings :

2 - 5 - 2 - 2
32M
Auto
Normal
4
Enable
Disable

http://www.thelab.gr/images/Hipro5/T...0MHz_1_png.png

The funny here is that the cpu-z shows "crazy" product date...... :D

http://www.thelab.gr/images/Hipro5/T...0MHz_2_png.png

http://www.thelab.gr/images/Hipro5/T...0MHz_3_png.png

.......and these are 2 x 512MB BH-5 chips for comparison.......at the same config....... ;)

http://www.thelab.gr/images/Hipro5/T...12MB_1_png.png

ALL I have to say is : Twinmos with the UTT chips = BH-5 chips........ ;) :)
01-02-2005, 09:04 AM
TEDY

so you guys saying

160$ for a GIG of good overclocking RAM ?
01-02-2005, 09:09 AM
hipro5

Quote:

Originally Posted by TEDY

so you guys saying

160$ for a GIG of good overclocking RAM ?

As I know esdee bought them about 140Euros........ ;)

I think I'll get 2 x 256MB ones to see how they will do.......Hmmmm....... :)
01-02-2005, 09:12 AM
Revv23

damn hipro...

now i want that maximizer ever more lol.

i need to buy another set of ram for an old computer im selling so ill give these a shot and if they are good then ill keep em and if they are bad then away they go.
01-02-2005, 09:15 AM
DaGoof

Is it this:
http://www.newegg.com/app/ViewProduc...218-404&depa=1

or this?

http://www.newegg.com/app/ViewProduc...218-059&depa=1

Or am I completely off?
01-02-2005, 09:27 AM
celemine1Gig

Quote:

Originally Posted by tom_ed

well heres a pic:

http://img159.exs.cx/img159/5383/p10100209au.th.jpg

i think it has 2 large dimples on the chips. testing now...

Hmm, interesting. Then Twinmos changed something, as some time ago all Winbond based Twinmos RAMs began with 04xxxx and so on. Yours is 03xxx and is definitely Winbond based. :toast:

Good luck with the sticks. :)

Edit: Well, got it wrong. Now I realized that it's the 4 at the end and not in the beginning. So yours are chips from week 25 in 2003 and the 4 means that it's winbond based. That's it. :D

So yours should basically be CH-5 chips.
01-02-2005, 09:33 AM
Jessfm

So would that make this http://www.tekheads.co.uk/s/product?product=601808 the stuff to get ?

Im going to grab a 2x256 on tues if so.
01-02-2005, 10:20 AM
TEDY

damn cheap :>
01-02-2005, 10:23 AM
tom_ed

well both been tested on my DFI 250gb @ 3.1v. I would have gone higher but im on a crappy 300w psu that has a 3.3v rail @ 3.15v

one stick did 240mhz 2-2-2-5 and the other did 247mhz 2-2-2-5. i feel with more volts they could go higher they scaled well up to there.

Jessfm that is the exact kit that this is, but i dont think they come with winbond chips anymore.
01-02-2005, 10:33 AM
TEDY

who could buy this for me in europe and send me ? i could wire the money

got no cc :(
01-02-2005, 10:36 AM
Jessfm

I think its worth a look then.

But Hipro5 is reffering to a newer chip thats on these ??

So the chips between BH5 and the new UTT are poor clockers( CH5 or Mitsubishi chips?)

or am I totaly confused now ( to be fair I have had a couple of beers today)
01-02-2005, 11:22 AM
tictac

so we should hunt for Twinmos with mtec/Twinmos chip

week 82 2004 or newer

Thanks Hipro5 :)
01-02-2005, 11:27 AM
MrQ3W

Week 82 sounds tough...;)
01-02-2005, 11:36 AM
tictac

yes it is :slap:
01-02-2005, 12:37 PM
Revv23

so which do i buy? :(
01-02-2005, 01:18 PM
mrlobber

w00t, I just bought a kit of OCZ VX (still on the way), now I have to buy these as well? :D
01-02-2005, 02:50 PM
esdee

Quote:

Originally Posted by tictac

so we should hunt for Twinmos with mtec/Twinmos chip

week 82 2004 or newer

Thanks Hipro5 :)

tictac you need to reboot your brain!!!! :toast:
01-02-2005, 02:54 PM
enzoR

Quote:

Originally Posted by hipro5

Hi there guys and HAPPY NEW YEAR...... :toast:

Now........Testing those two modules I was quit amazed I could say...... :D

They ACT like BH-5 modules BUT COLDER.......on an INTEL rig....... ;)

With 3.2Vdimm(provided by the DDR Maximizer - clean power - :D .....they reached over 240MHz at Cas 2 - 5 - 2 - 2.........NONE CH-5 chips works at those settings on an INTEL rig so I believe that they are NOT equiv. to CH-5 chips........ ;)

Twinmos 2 x 512MB UTT on an ABIT AS8 Mobo with the 865 chipset.......at 3.55Vdimm....

PAT = Disabled

Timings :

2 - 5 - 2 - 2
32M
Auto
Normal
4
Enable
Disable

http://www.thelab.gr/images/Hipro5/T...0MHz_1_png.png

The funny here is that the cpu-z shows "crazy" product date...... :D

http://www.thelab.gr/images/Hipro5/T...0MHz_2_png.png

http://www.thelab.gr/images/Hipro5/T...0MHz_3_png.png

.......and these are 2 x 512MB BH-5 chips for comparison.......at the same config....... ;)

http://www.thelab.gr/images/Hipro5/T...12MB_1_png.png

ALL I have to say is : Twinmos with the UTT chips = BH-5 chips........ ;) :)

My CH-5 does the same on abit IC7-G 3.55V ;)

i'll post shots tommorow :)
01-02-2005, 07:11 PM
Revv23

yeah ive seen newer ch-5 doing that before...

but still, what do i buy!? :(

lol
01-02-2005, 07:19 PM
LSANTHRAX

yeah i'm a little confused here as well are we supposed to get the speed premium with the twinmos chips or the cheap ones with the mtec chips?
01-02-2005, 07:23 PM
Jessfm

Quote:

Originally Posted by LSANTHRAX

yeah i'm a little confused here as well are we supposed to get the speed premium with the twinmos chips or the cheap ones with the mtec chips?

me 2
:confused:

Show 100 post(s) from this thread on one page