Gskill F3-17000CL8-D

Printable View

Show 100 post(s) from this thread on one page

04-01-2011, 07:19 PM
Hondacity

Quote:

Originally Posted by Dumo

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(

i learnt that the hardway ... now im waterproof :D
04-01-2011, 07:41 PM
Elmy

http://img685.imageshack.us/img685/4...7241t53ghz.jpg

Uploaded with ImageShack.us

Just ran this .... This memory is awesome :-)
04-02-2011, 04:38 AM
theoldtimer

Quote:

Originally Posted by Dumo

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(

I'm sorry to hear that Dumo. :( I hope you find an X59 with a 110 BCLK chip to replace it my friend.:yepp:
09-07-2011, 07:10 AM
easegantini

Hey, guys! I want to buy another kit of 2133 8-9-8-24.
Is there someone that lives in Germany or Australia to help me?
I found online stores at these countries.
Thankss!
09-07-2011, 10:04 AM
theix

Quote:

Originally Posted by easegantini

Hey, guys! I want to buy another kit of 2133 8-9-8-24.
Is there someone that lives in Germany or Australia to help me?
I found online stores at these countries.
Thankss!

Check out www.memoryc.com. It's out of stock right now but you can put in your email in for stock notification email.
09-07-2011, 11:51 AM
easegantini

Quote:

Originally Posted by theix

Check out www.memoryc.com. It's out of stock right now but you can put in your email in for stock notification email.

Thank you! I just did that. :up:
09-07-2011, 12:03 PM
websmile

You won't be very successful at least in germany, the mems are listed but not available, afaik there is only amazon de left with a single kit.
09-28-2011, 07:14 PM
Dumo

2133 CL8D-4GBXMD's pcb...

http://img192.imageshack.us/img192/3...nshot029cd.jpg

Same pcb and still a lot of stock @ Newegg...The only drawback is you probly have to bin it:D

http://www.newegg.com/Product/Produc...82E16820231275

http://img819.imageshack.us/img819/4...nshot030px.jpg

http://www.newegg.com/Product/Produc...82E16820231276

http://img89.imageshack.us/img89/389...enshot031i.jpg
09-29-2011, 12:04 AM
l0ud_sil3nc3

@ Dumo

good looking out, that is a good find especially since this memory is almost impossible to find:up:
09-29-2011, 12:53 AM
websmile

Don't expect too much of these kits, same pcb doesn't mean same ics, the best kit of the 1333 c7 I had did 1068 9-10-9 on sb with 1,63v, not scaling above this v. nonetheless these are relatively good mems at this price especially
09-29-2011, 01:34 AM
Dumo

Gskill flooded newegg with 100s of these 1333 sets which probly 2133 rejects.

I'll try a few sets just in case Gskill binner misplaced a few 2133. Lol
09-29-2011, 07:40 AM
PolRoger

@Dumo

Please let us know if you find some worthy (hidden) gems.
10-01-2011, 02:31 AM
Dumo

Quote:

Originally Posted by PolRoger

@Dumo

Please let us know if you find some worthy (hidden) gems.

Got a few of C7..Different PCB (single sided) good for 24/7daily rig @ stock spd only:)

2133 C8 new batch back in stock...black pcb:(

http://www.newegg.com/Product/Produc...82E16820231450

New batch on top...

http://img11.imageshack.us/img11/885...nshot003gg.jpg

http://img577.imageshack.us/img577/8...nshot002vr.jpg
10-01-2011, 04:38 AM
PolRoger

It seems only the early samples had the green pcb. Even my second kit from NewEgg back in mid-march had the black pcb but at least the price has come down... back then they were still $159.99 per kit! Does your green kit seem to have better quality ic's and clock higher?
10-01-2011, 06:06 AM
badatgames18

dumo are the black pcb still bbse?

tell me quick before they're all gone again :(
10-01-2011, 07:55 AM
Dumo

@Bad...I havent strip it off

@PR...So far no 6-9-6 2133+ with the black ones

Heres black pcb C8 @ 1.72V and UD7-B3.

This 2600K max @ 105.6 BCLK

Will play with AMD next

http://img851.imageshack.us/img851/3...nshot005hb.jpg
10-01-2011, 08:23 AM
PolRoger

Can your new kit do 7-9-7-24 2133 with ~ 1.65v?
10-01-2011, 08:58 AM
hiwa

Quote:

Originally Posted by Dumo

@Bad...I havent strip it off

killed some black pcb to see the ICs, don't do that, timing can prove the ic
10-01-2011, 09:38 AM
Dumo

Quote:

Originally Posted by hiwa

killed some black pcb to see the ICs, don't do that, timing can prove the ic

I never want to mess with opening hsf since I killed my naked gem FX57. Lol
10-01-2011, 02:35 PM
ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

http://i48.photobucket.com/albums/f2.../Capture-7.jpg
10-01-2011, 10:29 PM
Dumo

Quote:

Originally Posted by PolRoger

Can your new kit do 7-9-7-24 2133 with ~ 1.65v?

Yep, with slight bump on VTT and Vcsa

Quote:

Originally Posted by ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

Nice run Zen, are those black pcb?

Heres black pcb @ 2133+ 1.64v and a 2600K with hot cores..

http://img90.imageshack.us/img90/134...nshot008wi.jpg

http://img198.imageshack.us/img198/1...nshot009mk.jpg
10-02-2011, 12:45 AM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

Got a few of C7..Different PCB (single sided) good for 24/7daily rig @ stock spd only:)

2133 C8 new batch back in stock...black pcb:(

http://www.newegg.com/Product/Produc...82E16820231450

New batch on top...

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

Quote:

Originally Posted by ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

http://i48.photobucket.com/albums/f2.../Capture-7.jpg

what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB
10-02-2011, 01:14 AM
Leeghoofd

Any real stability test on them clocks zeneffect ? are they 24/7 stable at them clocks ?
10-02-2011, 01:32 AM
websmile

Quote:

Originally Posted by l0ud_sil3nc3

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test
10-02-2011, 01:55 AM
l0ud_sil3nc3

Quote:

Originally Posted by websmile

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test

no kidding, 2 kits of the 2133 8-9-8 for $240 shipped was a no brainer.

I also have some GTX3 coming to add to the 2200 7-10-10-27 PSC kits, but sadly no hypers in my arsenal

32M is what is needed to see memory stability, regardless, the newer kits seem to clock well also, not sure how they compare to the older ones but I can't wait to see.

Show 100 post(s) from this thread on one page