anyone? could really use help, first time build. just want to see if there is a spot on this motherboard to connect the case power button and reset button. i can find where it is at if there is.
Printable View
anyone? could really use help, first time build. just want to see if there is a spot on this motherboard to connect the case power button and reset button. i can find where it is at if there is.
closer inspection of the manual and the board has shown me the light! now, where is that 1.20 version of the bios?
so after going into the bios it actually showed me that version P1.20 is already installed on the motherboard.
Asrock 890GX Extreme3 + PII X2 555BE
Assembled system with stock heating and 1600 CL7 RAM.
CPU around 40C.
BIOS 1.10 + Seven Ultimate.
Enabling UCC in BIOS I get X4 but Windows can't boot. The strange thing is that I tryed any core combination in BIOS but always get lock or BSOD, even activating CORE0 only. There must be something to setup, I've left all defaults except for hdd controller to AHCI.
ASRock 890GX Extreme 3 + PII X2 555 --> PII X4 B55
Stock fan using G.Skill 1600 CL9 RAM
CPU around 40C as well
Bios P1.20 + Ubuntu 10.04 beta2
Get bios 1.20 , much better in that issue. nothing special , just enable and all cores and boot .....voila. If the cpu is not with one damaged core.Quote:
Originally Posted by mikedepetris
maybe don't use ahci , same problems with ucc disabled?
BIOS 1.51 if someone want to try
http://milans.everon.pl/890GXE1.51A
// not official
Beta? , what is with the A
Awesome :D
Almost finnished :p:
Hmm... Is this realy true BIOS?Quote:
Originally Posted by Milans
I do not want to risk my board for now, because i cant get any
new for about 4 weeks...
stay with 1.20 it is the far best till now , running 1.53 here atm but the shutdowns again after settings made.
don't be afraid. This BIOS works fine.
look at this..
http://valid.canardpc.com/show_oc.php?id=1132113
X6 @ 6292.46 MHz @ ASRock 890GX Extreme3
I tried 1.10 1.20 and 1.51a but always have the same result.
If I enable UCC I get X4 from BIOS but XP can't complete boot, goving lock or BSOD.
The weird thing is that I try any core combination but it's always the same even if set to monocore with CORE0 only.
It works well with same settings and UCC disabled.
???
What should I try?
So what's the overall opinion of this board from folks who have used it (ASrock 890GX)?
From what I've read in this thread, most results look pretty positive.
My GBT 890GX died on me, and I've always liked the looks of this board.
I like the layout, the color scheme and the features...
I've never had an ASRock, but this board caught my eye from the first time I saw it!
I was going to wait for the 890FX boards, but I really don't need all the extra PCI-e lanes (no intention of running Xfire anyway).
I'm a dedicated AMD guy so I like the underdog. ASRock seems to be the underdog of Mobo manufacturers (they just try harder ;)), I respect that!
Oh yeah, for the folks who were conserned about cost and were considering the 880g version of this board, the one thing I would worry about would be the PWM sections of those boards!
They look like they're 4+1 on the power, personally, I've had really bad luck with 4+1 boards (maybe I just abuse them too much :D)...
From my experience with PHII boards the few extra $$$ for the GX and 8+2 power would be money well spent.
overclocked? or stock? , maybe something with the chip, with 1.20 bios i have no problems whatsoever with unlocking. don't think it has something to do with the bios version.Quote:
Originally Posted by mikedepetris
The board is fine, nothing wrong with it, even at high speed en voltage's, my choice howeve should be the 890 Fx becouse of a bit more performance.Quote:
Originally Posted by Daveburt714
I have been happy with the board thus far. a few hangups here and there were it wont boot after i exit the bios, it gets stuck on a boot up loading screen. but seeing as i am running a beta OS, i am not ready to chalk it up to the MB, especially since it doesnt happen every time. To be truthful at first i was going to get the ASUS 890gx board but then i saw the ASRock and figured hey i would take a chance with them. been happy since.Quote:
Originally Posted by Daveburt714
Sir Rol-co any chance of sharing the 1.2 bios...
Edit : ow I forgot to say plz
ASRock 890GX Extreme3 allows to unlock two additional cores of Zosma
http://img704.imageshack.us/img704/1...alzosma.th.jpg http://img704.imageshack.us/img704/2...nlocked.th.jpg
interesting :)
Nice going ASrock :)
how much is the Zosma going to cost here in the US?
QUESTION:
Whats the lowest voltage you can set for RAM on this board?
The lowest I can get on this GBT 790XT-UD4P is 1.6v.
I'm sure my Mushkin (BBSE's) don't need that much.
Will the bios let you go down to 1.35v?
Thanks..... Dave
the minimum voltage you can set is 0.987V
con anyone give me the bios setting to overclock 1055T with this mobo, i just bought this mobo but im noob for oc
please need guide