Yeah, it's safe, but it's pretty hard to get stable with such temps from my experience.
Printable View
Yeah, it's safe, but it's pretty hard to get stable with such temps from my experience.
I ll give it a shot and report back. If i will not manage to get is stable at 4.5 ht on then you will make it a 4.4 club :p:
LOL, I'm in the same boat. :p: I keep tweaking trying to get the temps down.Quote:
Originally Posted by ChaosAD
Good luck, though! :up:
The only mod i can make is to open the window at night to get some 10C cold air from outside and close the heating, LOL
w3520 3945a Water cooled with the help of nature. Ambient temps between .5 - 1c. Everything is overvolted more than it needs to be but I failed LinX at 1.5 Vcore after 16 passes and it was getting late so I just cranked up all my voltages ftw.
My 2 previous i7-920 39xxx batches couldn't come close to this so i'm pleased with this Xeon.
http://i399.photobucket.com/albums/p...520-45pass.jpg
Updated.
@ trn: good job, and very nice temps! :up:
I would like to join the club too :D
http://img25.imageshack.us/img25/6195/45001hlinx.png
@alfaboy, very nice! Do you know what batch your 920 is?
could linx it but summer now so i will show blend...running 2,5hs+ on a winter day
http://img64.imageshack.us/img64/5633/45001200.png
Cheers
Sergio
My 920 D0 BATCH #: 3849A765Quote:
Originally Posted by trn
Do i5-6xx count for this? :p:
If so, that list is going to grow here pretty quick.
Sure. :up:Quote:
Originally Posted by tool_462
They are made by Intel, aren't they? :D
awesome party you have here, I wanna join :D :party:
http://img297.imageshack.us/img297/2408/4500cut.png
aka_GK
Very nice :up:
What are the odds of the list being updated with batch #'s?
A lot of people don't want to remove their coolers just to tell us their batch numbers so this will not make it into requirements.Quote:
Originally Posted by scgt1
A few people listed them, though.
But there are so many batch number threads already so it shouldn't be a big deal anyway.
However, if people wish to list their batch numbers, I will surely add them to OP.
Well, i got this monster on water. :rofl:
test on water rig:
ddc3.25/xspc res top->He120.3(3x GT-ap15)->HK 3.0 cu.
ambient is 20C.
Very disappoint the Evga board not supports this CPU now. still waiting the new bios from EVGA. :(
http://i645.photobucket.com/albums/u...g?t=1264333159
That's an amazing chip, congrats! :up:Quote:
Originally Posted by kone
more update,
4.83G pass linx 50 run on water :rofl:
http://i645.photobucket.com/albums/u...g?t=1264515192
Nice results! Looks like cherry picked retail Gulftowns should be able to get to 5GHz on water! :D
Yes, The 32nm chip very good on the temperature.
This chip can do 4.6G pass linx 50 run on AIR.
Just under Megahalem with GT1400RPM :D
Where the hell did you get that chip at? I can't find 32nm Xenon chips at the egg. I did a search for intel 1366 and came up with nothing but the older 45 nm process chips.
Yo Zalbard, i have 12gb of memory. For how long should I run the test to join the club? )
Would be around 2 hours for 20 passes unless your i7 runs @ 6GHz. :rofl:Quote:
Originally Posted by KingOfsorroW
If you can't manage that long then your system is not stable for the used settings I guess... Try chilled air or pulling out 3 sticks of RAM (assuming you're using 6), such kind of 'cheating' is acceptable. :p:
Chilled air is the best option I guess, considering the temps outdoor ))