Printable View
Wow! I think we found a bigger fanboi than RRR. :ROTF:
Bentleya, I'll wait for testing but I expect it to be near the top on flow but average or below on head pressure. I also don't like the cheap resin they used to mold it with, looks very frail. ...and those 5.25 mounts are joke, I see many ppl :banana::banana::banana::banana::banana:ing about them breaking.
I believe the ppl here are giving bentleya a hard time with all the statements. Tho' most are probably said for a good reason.
Bentleya, I do see why you are "protecting" this top. I mean, who wouldn't back up for a sponsor. I would happily do the same thing if I was to be sponsored. But can you honestly say that this thing looks good? Everything seem to be so, I don't know, poorly done. Why couldn't they have put more material in the 5,25" bay "beams" for example?.
You gotta' give the people what they want. I would suggest you to get Feser to read this thread and have them make some changes to the top in order to make it have a bit more quality look to it. So far, most of Fesers products have been great so it would be nice if they could keep that up. :)
+1Quote:
Originally Posted by NysoO
Feser tubes:up:
Feser top :down:
btw bentleya is't from feser? :eek:
:cool::cool::cool:Quote:
Originally Posted by Waterlogged
Quote:
Originally Posted by NysoO
:clap::clap::clap: he he none of them are my pictures :D
Feser Tube :up:Quote:
Originally Posted by Arni
Feser Coolant :up:
Feser Rads :up:
Feser Top :up::down::up: (needs tweking)
Feser Res Top (in design stage) :up:
is it just me or not. but i still don't see any pictures of the left side (from middle chamber to outlet barb) all pictures are either front or right side or top only...
pls post picture of left side of this top...
Naah, Coolant destroy my old mobo [cheap but mobo is dead]:down:Quote:
Originally Posted by bentleya
i will see what i can do :cool:Quote:
Originally Posted by septim
every coolant out there on the market will destory your kit, accept that stuff there used in that dream pc :p:Quote:
Originally Posted by Arni
:up::up: glad you went for a trolling sesisionQuote:
Originally Posted by stormshadow
Just another DDC top.
Seriously, why put a product into an already saturated market, a market where the pump tops are that close in performance none of them really offer an advantage.
The last company to actually release anything the consumer has been asking for, is BitsPower.
bits power does my head in :p lol most there product other companys make as well now and are cheaper, fat boys, DD do them cheaper, compession fittings Feser do them cheaper
So on that what do you want feser to make?
say what you want them to do?
ideas?
what do you guys want?
Qft
That one is just plain ugly :s If that give me 1c better temps, I'll still go with another top, cause that one is just to ugly.. And will most likely be feser priced anyway..
Quote:
Originally Posted by bentleya
I would personally like a second line of products focused heavily on quality and not on glitz and bling. Never mind the acrylic. Make some products in acetal.
Look at the quality of BP. Go one step further. I myself don't mind paying the price if the products are of such quality.
How about a radiator that needs no pre-cleaning. Shrouds included and already installed. Barbs already installed. Fully plug and play.
i have to say i wasn't keen on their tube, but i like their coolant and their comp fittings. Oh and their rads look lovely - defo my next buy.
I will reserve judgement on the DDC top till it's been reviewed throughly
But DD still get from us...and no Clone...All the price are the same with our MSRP...Quote:
Originally Posted by bentleya
But Fxxxx stolen our PAT. design and always announce they have theirs...
If they can make their own design...everyone respect...but I never have that news and never see that till now..I think evreyone in their country know that..
Only ask sample and then make copy...that's all.
of course...they did colne and make it "cheaper"..Ya it's cheaper..and clone one need to be "cheaper". What they call cheaper is to make others know they can make compression fittings..that's all...But they really know how?
We have known they will have DDC top..because they asked one sample form one company in UK and then we all know they will come out this one...
Like the RAD is from their supplier, cost cheaper under USD 60 in four but market price is really cheaper? I think there will be a new brand will also do the same products like them and come form the same quality and cost..but that new brand will be cheaper...hehe.
That's a concern. If what you say is true, then Fxxxx don't deserve my $$$.:shakes:Quote:
Originally Posted by BP-Vincent
Patents. That's the solution to BP problems.
It sounds like they already have one. Will BP take any action against Fxxxx to protect the integrity of their products?Quote:
Originally Posted by BP-Vincent
Yes, I can read - I just chose to ignore what you said. The fact you point out that BP don't make all their own stuff in defence against Feser is purely laughable.
Almost all companies apart from DangerDen (who still buy off other companies and re brand as their own) have their machining done by a third party. There is zero way Feser make all of their products either, I'm not aware of what % margin water cooling parts go for, but in terms of total cash margin - it can't be a lot due to the relative cost of parts being small. This a lone means having machining just for water cooling part products isn't very efficient, hence why most companies outsource.
Not that there is anything wrong with that, it's just pure common sense as explained above.
Compression fittings
SERIOUS BUSINESS
:D
now imagine if this top was made of Alu? :argue:
Oh yeah Feser One is just as good as distilled water. Hmmm I haven't a clue why they wouldn't like your videos :p:Quote:
Originally Posted by Petra
wow, the compression fittings on that top really give u the confidence to hook it up to a 300+ GBP loop, not...
why not go and buy a nice PTS, EK or XSPC top instead, they look much nicer and probably perform a lot better, whilst reducing heat dump by not having LED's that make it look cheap and nasty
You guys are missing the point i see.
A copy is a copy.
A copy of a copy is another copy. <--- where almost everyone is at. Please everyone has copied off someone. Dont get me started on this.
A copy thats cheaper = FTW
A copy thats crappier = Junk
A copy thats improved and cheaper = In my personal inventory.
Who cares if you copy. The main point is, is it better then the original? And is it cheaper?
If those two are yes, i can care less who came out with it first.
And dude EVERYONE copied something off someone. If anyone, DD should be the most pissed.
Everyone ripped there full cover blocks off them and then had the nerve to say it was junk when they were first. :rofl:
Well the truth is it was, yet everyone went EK. We dont hear you guys bashing EK for copying DD FC blocks.
innovators vs duplicators :shrug: